Suchen

... Mysysprep also allows us to name the PC from the BIOS asset tag information. By adding the below to to the sysprep.inf (as ... the imaging command prompt you can do this: hwinfo --bios Which gives you information from and about the BIOS of the PC you run ...

Article - baarsd - 18 Mar 2009 - 10:53am - 8 comments - 1 attachment - 2 Gruppen

... you can fully control your server including BIOS Settings, remotely insert CDs, and so on. With the licensed iLO ...

Article - zerfowski - 22 Nov 2008 - 9:34am - 4 comments - 0 attachments - 2 Gruppen

... refer to the Troubleshooting Table below. BIOS -> MBR/stage1 -> stage2 -> kernel/initrd -> init -> boot ... Troubleshooting / Potential Fixes 1 BIOS N/A BIOSMessages Update the firmware Make sure a disk ...

Article - jrecord - 3 Sep 2008 - 9:30am - 2 comments - 0 attachments - 3 Gruppen

... correct the issue. Disabled hyperthreading in the bios. This did not correct the issue. Attempted to uninstall sp7 to undo ... said was an OS problem. Disabled ASR within the BIOS . Rem'd out "c:\acpidrv.psm" out of the startup.ncf file. Now ...

Article - jmfuge - 5 Aug 2008 - 8:56am - 0 comments - 0 attachments - 3 Gruppen

... one logical drive on the storage system by using the BIOS utility included with the HBA. If you’re using a Qlogic HBA you can ...

Article - samprior - 19 Jun 2008 - 10:36am - 4 comments - 1 attachment - 3 Gruppen

... want to use laptop or desktop hardware in which the BIOS supports booting to a USB device. Why would you want to do this? ... drive without issue. However you need to understand the BIOS in your machine; I would suggest removing any USB devices except for the ...

Article - rjdunn - 26 Apr 2008 - 12:26am - 15 comments - 0 attachments - 3 Gruppen

... from the primary disk, as determined by the system BIOS . The /boot/grub/device.map shows which disk(s) the BIOS presented to GRUB . In this case the secondary disk is (hd1) or ...

Article - jrecord - 11 Apr 2008 - 10:33am - 0 comments - 0 attachments - 3 Gruppen

... disk with a raid configuration presented by the BIOS as RAID that is in fact a software RAID. The following disks ... my system wouldn't boot from /boot (I guess the BIOS didn't support it) I had to install GRUB on the MBR I've ...

Article - jrecord - 7 Apr 2008 - 7:09am - 13 comments - 0 attachments - 3 Gruppen

... timesync by changing the CPU power mode in the BIOS of his HP servers. In the F9-setup utility on a G5 series server, ...

Article - cparker - 17 Mar 2008 - 6:54pm - 4 comments - 1 attachment - 2 Gruppen

... that supports it. You will also need to enable VT in the bios, so make sure your bios support this. After enabling in the bios, be sure to completely power off ...

Article - gldavis - 22 Feb 2008 - 1:06pm - 0 comments - 0 attachments - 2 Gruppen