Article

Imagen de mikeyes
article
Reads:

%count lecturas

Score:
3.5
3.5
2
 
Comments:

2

Map Users to Local Server Dynamically via Login Script

Author Info

12 December 2007 - 8:16am
Submitted by: mikeyes

Author Blog
Author Profile

Tags

Tags Map

(View Disclaimer)

You can use the "IF NETWORK_ADDRESS" option within the login script to detect the local subnet where users are logged in. This will allow you to dynamically map drives to a local Novell server if the user is logging into a remote WAN connected site. This can be done with no re-configuration on the user's part, or any changes to the Novell client.

An example will demonstrate:

"NO_DEFAULT

REM site1 (10.30.0.1 to 10.30.255.255)
IF NETWORK_ADDRESS>"0A1E0001" AND NETWORK_ADDRESS<"0A1EFFFF" THEN
   SET BUILDSERVER = "SERVER1"
END

REM site2 (10.32.0.1 to 10.32.255.255)
IF NETWORK_ADDRESS>"0A200001" AND NETWORK_ADDRESS<"0A20FFFF" THEN
  SET BUILDSERVER = "SERVER2"
END

REM site3 (10.34.0.1 to 10.34.255.255)
IF NETWORK_ADDRESS>"0A220001" AND NETWORK_ADDRESS<"0A22FFFF" THEN
  SET BUILDSERVER = "SERVER3"
END

REM Map drive to folder in local city USR volume
MAP ROOT H:=%BUILDSERVER\USR:VOLUME\%USERNAME
REM Map drive to NetWare server APPS: volume
MAP ROOT M:=%BUILDSERVER\APPS:
map s1:=z:=%BUILDSERVER\SYS:Public

Exit"
It is required to make the source variables on all NAL objects as identical as possible, including:

  • Installation paths (driveletter:\app\app.exe)
  • Template paths (driveletter:\templates\template folder)
This will allow the files to be pulled from the local server rather than across a WAN link.


Disclaimer: As with everything else at Cool Solutions, this content is definitely not supported by Novell (so don't even think of calling Support if you try something and it blows up).

It was contributed by a community member and is published "as is." It seems to have worked for at least one person, and might work for you. But please be sure to test, test, test before you do anything drastic with it.



Related Articles


User Comments

Imagen de spond

Can be simpler...

Submitted by spond on 15 December 2007 - 2:20am.

An alternative way to do this was already covered in TID 10062309 five years ago :)

Imagen de rgray

This has been done a while ago, but.....

Submitted by rgray on 20 December 2007 - 10:36am.

a neater way to do it is to only use the network portion of the IP address...

;Test IP address
Set ZNET="%NETWORK_ADDRESS" >>4

;Test to see if PC is in Northampton
IF "%ZNET" = "0A0B" THEN

© 2013 Novell