Buscar

... the performance moves between 2 mb/s and 5 mb/s in a gigabit environment…. (in my case) Too bad I think and in the same ...

Article - tfe - 28 Sep 2010 - 10:31am - 3 comentarios - 0 adjuntos - 1 group

... hours. When both the old and new servers are on gigabit ethernet, the fastest transfer time we’ve seen is 40GB/hour. ... it will take to copy the data to the new server, use a gigabit Ethernet switch. If either the old or new servers don't have ...

Article - cparker - 17 Mar 2008 - 6:54pm - 4 comentarios - 1 adjunto - 2 groups

... to do training take a very inexpensive 8 port gigabit switch ( Lynksys/Cisco ) makes 1 for about $80.00 US ) and some ...

Blog Entry - Pepzwaanshoek - 26 Sep 2008 - 1:28pm - 6 comentarios - 0 adjuntos - 2 groups

... you'll want to VLAN it and make sure the [ gigabit ] switch and [gigabit] NICs have Jumbo Frame support. Tx and Rx Flow Control is helpful too ...

Article - sowenatedzonedotnet - 1 Feb 2008 - 7:32pm - 0 comentarios - 0 adjuntos - 2 groups

... controller: Broadcom Corporation NetXtreme BCM5755 Gigabit Ethernet PCI Express (rev 02) In this instance the NIC card ... controller: Broadcom Corporation NetXtreme BCM5755 Gigabit Ethernet PCI Express (rev 02) Launch the YaST Network Card ...

Article - jeshort - 7 Dic 2007 - 6:52pm - 2 comentarios - 0 adjuntos - 2 groups

... I use this is on the B57.LAN driver. The Broadcomm gigabit Ethernet that Dell and other vendors use often as the built in GigE card. I need to add support for Flow control at Gigabit speeds, so I have edited ours to add the RxFLOW=ON and TxFLOW=ON which ...

Article - geoffc - 17 Nov 2008 - 2:45pm - 0 comentarios - 0 adjuntos - 3 groups

... to the task using the best hardware possible ( gigabit , or ten-gigabit ethernet). On the security side of it adding encryption to a ...

Article - aburgemeister - 23 Jun 2009 - 3:18pm - 0 comentarios - 0 adjuntos - 2 groups

... department laptops. The network card is a Marvell Yukon Gigabit Ethernet card. When I PXE -boot and use te ... a Manual Install. From their, the sky2: Marvell Yukon 2 Gigabit Ethernet driver appears to load or I can use the SysKonnect SK-98xx ...

Blog Entry - spond - 21 Abr 2007 - 5:04am - 22 comentarios - 0 adjuntos - 0 groups

... switches, and host bus adapters. Because standard gigabit Ethernet switches and adapters and CAT-5 cabling are used, the ...

Article - gchilders - 29 Ago 2008 - 11:09am - 0 comentarios - 0 adjuntos - 3 groups

... three or more times the traffic will flow across the NIC. Gigabit NIC cards are the only way to go. Note: Make sure that, in ... occasion create corruption within the databases. In a gigabit environment, hard-configure the server NIC and the switch if ...

Article - GreggHinchman - 29 Feb 2008 - 7:03am - 0 comentarios - 0 adjuntos - 3 groups