Article
Cerca
Shameless Plugs
Most Popular
User login
4434
Setting up Access Manager with only One Public IP Address
Problem
A Forum reader recently asked:
"I have a small prospective client who has one public IP address. Can Access Manager be set up with one public IP address? Here's what they have:
Internet <->
|-(One Public IP Router) <->
|--(Natted IP Public side of LAG w/SSLVPN)
|---(Natted IP On Private IP Side of LAG)"
And here's the response from Soren Kallstrom ...
Solution
I have a setup where all communication with Access Manager is through one IP address. I do have to use a lot of PAT (Port Address Translation), though.
Here's what I have:
- Port 8080/8443 points to IDS
- Port 7777 points to SSLVPN listening address
- Port 80/443 points to the Access Gateway
Of course, you have to consider only having one IP address when designing the accelerators. You cannot, for example, have more than one accelerator with SSL listening on a given IP address.
Disclaimer: As with everything else at Cool Solutions, this content is definitely not supported by Novell (so don't even think of calling Support if you try something and it blows up).
It was contributed by a community member and is published "as is." It seems to have worked for at least one person, and might work for you. But please be sure to test, test, test before you do anything drastic with it.
Related Articles
User Comments
- Be the first to comment! To leave a comment you need to Login or Register
- 4434 reads
0