Cerca

... box) Set you network address and subnet (10.1.0.0 /16 in my case) Select “Save” when you are done. ...

Article - sowenatedzonedotnet - 1 Feb 2008 - 7:32pm - 0 comments - 0 attachments - 2 groups

... matches 192.168. You'll have to change that to match your subnet. The >> 4 part takes off the last 4 digits of the HEX address. If ...

Article - dmichael - 25 Jan 2008 - 3:00pm - 0 comments - 0 attachments - 2 groups

... none; default-lease-time 604800; subnet 192.168.1.0 netmask { range 192.168.1.50 192.168.1.100; ... made the server authoritative and removed the subnet that corresponded to the actual subnet of the server(which is a secondary subnet for us with no pool), then ...

Article - cyberv - 25 Jan 2008 - 1:53pm - 1 comment - 0 attachments - 2 groups

... NetBiosName ScriptedImage SID Subnet Mask Tree Workgroup WorkstationID Change Log ...

Article - coolguys - 22 Jan 2008 - 5:26pm - 0 comments - 0 attachments - 2 groups

... your routers. The ports need to be opened from the subnet where SSC is running, to any subnets containing clients that you ...

Article - coolguys - 22 Jan 2008 - 5:10pm - 0 comments - 0 attachments - 2 groups

... $ZISIP" echo -e " IP Gateway : $ZISGATEWAY" echo -e " Subnet Mask : $ZISMASK" echo -e " DNS Suffix : $ZISDNSSUFFIX" echo -e " ...

Article - coolguys - 22 Jan 2008 - 3:48pm - 0 comments - 0 attachments - 2 groups

... box, and IP address info boxes for IP address, Subnet Mask, and Gateway address. The thing is, if you click the IP tick ...

Article - geoffc - 16 Jan 2008 - 3:04pm - 0 comments - 0 attachments - 2 groups

... valid. I modified the routine to look for a non-zero subnet mask before saving the IP address. Once I had the IP address, I ... Values Dim Stage1 Dim Stage2 Dim Stage3 Dim Mac_Addr Dim Subnet Dim DHCP_E Set Registry = CreateObject("Wscript.Shell") Set FileSystem ...

Article - coolguys - 16 Jan 2008 - 11:40am - 0 comments - 0 attachments - 2 groups

... DHCP Service tab    Click on the subnet where your SLES box exists, select the Subnet Options tab, check on the Set Boot Parameter Option , and enter ...

Article - coolguys - 16 Jan 2008 - 11:19am - 0 comments - 0 attachments - 2 groups

... scenario, only the four servers were on the same IP subnet . For security purposes, the FTPSERVER is the only device attached to both the 'private' server subnet and the 'public' workstation subnet. In this manner, the FTPSERVER can ...

Article - rgoddard - 15 Jan 2008 - 2:08pm - 0 comments - 0 attachments - 2 groups