Article
Search
Shameless Plugs
Recent comments
Most Popular
Top Contributors
| Gebruiker | Points |
|---|---|
| geoffc | 161,300 |
| dlythgoe | 27,470 |
| mfaris01 | 19,630 |
| mbluteau | 19,240 |
| DamianMyerscough | 18,220 |
| aburgemeister | 17,805 |
| mbluteau2 | 16,505 |
| davesimons | 15,300 |
| gchilders | 12,540 |
| dgersic | 11,505 |
Who's online
User login
3905
Understanding Device Boot Processes in a ZENworks Imaging Environment
We have heard from several ZENworks 6.5 SP1 customers who are confused by the changes to the processes they're used to following when doing Imaging.
The confusion stems from this key change, as outlined in the documentation: ZENworks 6.5 SP1 and earlier use the init process to perform the imaging. All ZENworks imaging processing is performed within the linuxrc process. For this reason, some of the standard processes you are familiar with do not work or exist in ZENworks imaging beginning with SP2.
We recommend you study this section of the documentation for a high-level overview of a Linux boot process and how ZENworks 6.5 SP2 imaging affects it. >
Disclaimer: As with everything else at Cool Solutions, this content is definitely not supported by Novell (so don't even think of calling Support if you try something and it blows up).
It was contributed by a community member and is published "as is." It seems to have worked for at least one person, and might work for you. But please be sure to test, test, test before you do anything drastic with it.
Related Articles
User Comments
- Be the first to comment! To leave a comment you need to Login or Register
- 3905 reads
0