Szukaj

... best hardware possible ( gigabit , or ten-gigabit ethernet). On the security side of it adding encryption to a SAN ...

Article - aburgemeister - 23 Jun 2009 - 3:18pm - 0 comments - 0 attachments - 2 groups

New Broadcom Ethernet cards are constantly being released and not being detected by the ...

Article - scum - 23 Jun 2009 - 12:19pm - 2 comments - 0 attachments - 3 groups

... always attached to a RAID controller. Network-attached (ethernet or Fibre Channel) adds its own overhead, as the storage has to live ... infrastructure that may be in place (assuming FC), or any ethernet infrastructure investments to support high speed storage-networking. ...

Blog Entry - Gracal - 10 Dec 2008 - 2:02pm - 0 comments - 0 attachments - 2 groups

... on the B57.LAN driver. The Broadcomm gigabit Ethernet that Dell and other vendors use often as the built in GigE card. I ... normally looks like: LOAD B57 NAME=B57_1_EII_EII FRAME=ETHERNET_II SLOT=10016 Speed=AUTO RxBuffers=200 Once I add the ...

Article - geoffc - 17 Nov 2008 - 2:45pm - 0 comments - 0 attachments - 3 groups

... Configuration option and select eth0 for the Ethernet Device ID . If there is an active DHCP server on the ... Hit the <Insert> key and choose CNEAMD Novell Ethernet NE2100 driver from the list. This will take you directly to the ...

Article - rparlett - 29 Oct 2008 - 11:53am - 1 comment - 0 attachments - 2 groups

... 0.51-8 Added hostinfo (5) Includes all ethernet addresses found Added -t and -T sec switches for a timer. The ...

Tool - jrecord - 19 Sep 2008 - 11:14am - 10 comments - 0 attachments - 3 groups

... uses the iSCSI protocol and Ethernet adapters, instead of the more expensive fibre channel cabling, ... and host bus adapters. Because standard gigabit Ethernet switches and adapters and CAT-5 cabling are used, the iSCSI SAN ...

Article - gchilders - 29 Aug 2008 - 11:09am - 0 comments - 0 attachments - 3 groups

... state active; next binding state free; hardware ethernet 00:16:3e:6d:b6:23; uid "\001\000\026>m\266#"; ... 2 explains each line. host damian { hardware ethernet 00:16:3e:6d:b6:23; fixed-address 192.168.0.10; } Figure ...

Article - DamianMyerscough - 16 Aug 2008 - 7:56am - 4 comments - 0 attachments - 3 groups

... netloop, which is basically a software pair of virtual Ethernet NICs connected via a software cross over cable. It had a few ... Replace the values for BRIDGE_PORTS with the correct Ethernet device name. VLANS and tunnel devices are eligible. If you do not ...

Article - utlemming - 4 Aug 2008 - 4:42pm - 1 comment - 0 attachments - 2 groups

... linux-y2v4:~ # ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:30:05:47:9A:7A inet addr:192.168.2.141 ...

Article - DamianMyerscough - 13 Jun 2008 - 6:28am - 0 comments - 0 attachments - 3 groups