Search

... (additional hardware and software required) over an Ethernet cable, users on a Multiplied Linux Desktop (or "ZERO-client" ...

Article - coolguys - 11 Feb 2008 - 7:19pm - 0 comments - 0 attachments - 2 groups

... the network is the bottleneck, and a single GigE Ethernet card is not enough to go beyond 80GB/hour. Setting the cache ...

Article - geoffc - 12 Jan 2008 - 2:02am - 0 comments - 0 attachments - 2 groups

... Frame 70 (262 bytes on wire, 262 bytes captured) Ethernet II, Src: CompaqHp_cb:7d:6a (00:0b:cd:cb:7d:6a), Dst: Vmware_c3:be:17 ... base: Frame 76 (443 bytes on wire, 443 bytes captured) Ethernet II, Src: CompaqHp_cb:7d:6a (00:0b:cd:cb:7d:6a), Dst: Vmware_c3:be:17 ...

Article - alswiffin - 11 Jan 2008 - 8:36am - 2 comments - 0 attachments - 2 groups

... to have different static IP addresses for one Active Ethernet interface, then the following should help you accomplish this ... test-host1 { fixed-address 172.18.0.100; hardware ethernet 00:11:22:33:44:55; } host test-host2 { fixed-address 172.18.0.101; ...

Article - cseader - 10 Jan 2008 - 2:58pm - 0 comments - 0 attachments - 3 groups

... you will need to know ifconfig (shows you your ethernet card bindings) (similar to "config" on NetWare) ip addr show (also shows you your ethernet card bindings. I use this command because it shows secondary ip ...

Article - jgriffis - 10 Jan 2008 - 2:55pm - 2 comments - 0 attachments - 2 groups

... SCSI CD-ROM drive, and 2 or more PCI Ethernet network cards. Once you have downloaded the .ISO file and ... existing firewall side by side. This means inserting an Ethernet switch between the Internet router (internal NIC) and the existing ...

Article - gchilders - 3 Jan 2008 - 2:46pm - 0 comments - 0 attachments - 2 groups

... su -c "ifconfig" Password: eth1 Link encap:Ethernet HWaddr 00:13:02:20:9F:70 inet addr: 192.168.2.4 ...

Article - mlfarrell - 19 Dec 2007 - 4:11pm - 0 comments - 0 attachments - 2 groups

... DomU: lspci or lspci | grep -i "Ethernet" You will something like the following: 3f:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755 Gigabit Ethernet ...

Article - jeshort - 7 Dec 2007 - 6:52pm - 2 comments - 0 attachments - 2 groups

... available. To add support for newer hardware such as ethernet cards, the easiest way is to modify the linuxrc.config file in the ... engine to support the Broadcom Netlink 5787 Gigabit Ethernet nics you would add the following to the end of the linuxrc.config ...

Article - Matthew_Nelson - 12 Oct 2007 - 3:33pm - 0 comments - 0 attachments - 2 groups

... multicore CPUs with multiple bonded 1/10 Gigabit Ethernet network interfaces. SLES10's integrated High Availability Storage ... direct attached OS image storage, 1 GB of memory, Gigabit Ethernet connectivity and access to a Fibre Channel SAN. These requirements are ...

Blog Entry - rawipfel - 8 Aug 2007 - 1:31am - 5 comments - 0 attachments - 0 groups