Sök

... to view . Figure 1. Topology 1. LUN Configuration: This article assumes that you or your SAN ... LUNs for presentation to your vSphere hosts. This LUN configuration is typically performed using the SAN manufacturer's disk array management software. Recall from above that one LUN will be used for a VMware Virtual Disk and the other for the RDM disk. ...

Article - vgehring - 1 Jun 2012 - 2:40pm - 4 comments - 0 attachments - 4 groups

... installation. We can point our iSCSI resource ( LUN or Logical Unit Number ) to any file or block device in our ... a target and accept the auto-generated name. 6. Add a LUN and point it to /sbd 7. Add another LUN and point it to /sharedrive. ...

Article - nkhuong - 16 Aug 2011 - 11:17am - 2 comments - 0 attachments - 2 groups

... the OES2 Linux server can see the actual disk (vdisk/ LUN , etc) and path to said item. (Again, my setup assumes multipathing is ... of the vdisk. The four numbers (0:0:3:8) are the path and LUN. The first number is the path (in the case of the Xiotech, it's the ...

Article - khurni - 7 Jul 2011 - 10:23am - 0 comments - 1 attachment - 4 groups

... from server. Either re-size (if necessary) your boot LUN/disk, or delete the old NetWare one and create a new one. If using ... I would strongly advise AGAINST using EVMS for your boot LUN setup. Use either custom partition or LVM setup. Why do we do this? ...

Article - khurni - 7 Jul 2011 - 10:20am - 0 comments - 1 attachment - 4 groups

... you install. You do NOT want to have one large "drive/ LUN / logical drive " to install everything onto. Bad things will happen. At a minimum, you want TWO disks/LUN's/Logical drives. One for your SLES "boot/root, etc" stuff and another for ...

Article - khurni - 1 Apr 2011 - 2:29pm - 3 comments - 1 attachment - 4 groups

... out LUNs. On a standalone server, we currently have one LUN for all volumes (NetWare). On the Cluster servers, each volume is a LUN. On the Xiotech SAN , one LUN should be made for each volume ...

Article - khurni - 1 Apr 2011 - 2:28pm - 0 comments - 1 attachment - 4 groups

... it to show where the SAN needed to connect, and the LUN 's that would need to be zoned to each location. This left us with a ...

Article - geoffc - 21 Apr 2010 - 11:07am - 0 comments - 0 attachments - 3 groups

... a iSCSI storage instead of NAS). Create any iSCSI LUN from any Linux machine (SUSE Linux has some good tools for iSCSI target ... (both source and target machines). How to add iSCSI LUN as the storage in the ESX Server when managing from VCenter. NOTE: ...

Article - battala - 11 Feb 2010 - 4:38pm - 0 comments - 0 attachments - 3 groups

... This process has only been tested with single disk (or LUN in the case of a "disk" being made up of a mirrored pair of disks) ...

Article - gavo - 13 Oct 2009 - 2:33pm - 11 comments - 1 attachment - 2 groups

... Why do we do this? We don't like to setup one big LUN (virtual disk, logical drive , whatever your RAID ... With OES2, you ALWAYS want to setup a dedicated LUN for your "boot" code, and leave a separate LUN for NSS (if using NSS). ...

Article - khurni - 6 Oct 2009 - 2:53pm - 3 comments - 1 attachment - 2 groups