Article

(View Disclaimer)

This article helps you to start NSS on Open Enterprise Server machine if it is not started after booting the system.

How do you know NSS is not started?

When you type nssmu command on the linux terminal you are seeing the following error which indicates NSS is not running on your machine.

systst-ts-74:~ # nssmu
NSS Management Utility - ERROR Either the Admin volume was
not found or you don't have rights to access it.

You can check the same by typing command df -h. If _admin is not there in the list then it is assumed that NSS is not started.

systst-ts-74:~ # df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/sda2              41G  4.4G   36G  11% /
tmpfs                1013M   56K 1013M   1% /dev/shm
/dev/sda1             502M   39M  464M   8% /boot
systst-ts-74:~ #

Here are the steps to start the NSS if it does not start automatically while booting.

Goto /opt/novell/nss/sbin

systst-ts-74:~ # cd /opt/novell/nss/sbin/

Enter ./startnss.bsh command

systst-ts-74:/opt/novell/nss/sbin # ./startnss.bsh
Installing MSAPServerId: 5557c2c2-d90f-1000-9850-00065bf6628c
insmod(ing) nwraid.ko kernel module
insmod(ing) admindrv.ko kernel module
Creating /dev/admindrv major_number=254
insmod(ing) libnss.ko kernel module
insmod(ing) linuxmpk.ko kernel module
insmod(ing) nsslnxlib.ko kernel module
insmod(ing) nsslibrary.ko kernel module
insmod(ing) nss.ko kernel module
insmod(ing) ndpmod.ko kernel module
Starting ndpapp daemon
insmod(ing) nsscomn.ko kernel module
insmod(ing) nssmal.ko kernel module
insmod(ing) nsszlss.ko kernel module
insmod(ing) nssmanage.ko kernel module
insmod(ing) nsslsa.ko kernel module
insmod(ing) nebdrv.ko kernel module
Creating /dev/userModeNebDrv major_number=253
Loading NSS pools
Starting adminusd daemon
Creating /_admin directory
Mounting _admin volume
Starting jstcpd daemon
Mounting all NSS volumes in /etc/fstab
Starting ncp2nss daemon
NSS is running!

Now type df -h on the linux console.

systst-ts-74:/opt/novell/nss/sbin # df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/sda2              41G  4.4G   36G  11% /
tmpfs                1013M   56K 1013M   1% /dev/shm
/dev/sda1             502M   39M  464M   8% /boot
admin                 4.0M     0  4.0M   0% /_admin

You can see _admin in the above list which indicates NSS is running.

Now type nssmu on the linux console:

systst-ts-74:/opt/novell/nss/sbin # nssmu

You will see the following screen.

Click to view.

Disclaimer: As with everything else at Cool Solutions, this content is definitely not supported by Novell (so don't even think of calling Support if you try something and it blows up).

It was contributed by a community member and is published "as is." It seems to have worked for at least one person, and might work for you. But please be sure to test, test, test before you do anything drastic with it.