Need a Backup?
Novell Cool Solutions: Feature
By Jason Jones
Digg This -
Posted: 30 Mar 2005
I recently became concerned with the increasing number of important files I store on my computer. I rarely back anything up, and with the number of aspects of my life I'm converting to be stored on my computer constantly growing, a hard-drive failure would certainly be disastrous.
I considered trying the normal "cp" command to copy the contents of my drive to a separate drive, but that only worked once. In order to back up the drive again after adding content, I had to copy the *entire* drive again - cp wasn't smart enough to know what was all ready backed up and what needed backing up.
To remedy this situation, I found a nifty little program called rsync. It was a perfect solution.
*note* rsync is a program that is quite flexible, and can do *much* more than is presented in this article. If you're interested in learning more of rsync's capabilities, please open a console and type "man rsync". The manual page is kind of technically written, so be prepared.
Now, what rsync does is really quite cool. It intelligently backs up information from a source to a destination. In my case, it backs up the entire contents of one local hard drive to another hard drive.
Now, when I said intelligently, I meant it only backs up what is needed. If I have 30 gigs of stuff I backed up a month ago, and 5 gigs of new stuff that needs to be backed up from the same drive, mingled throughout the same directories - it knows not to backup the old stuff, and successfully backs up the 5 gigs of new material. Cha-ching!
You may be asking "What's the catch here? This is too good to be true!" Well, unless you're very comfortable with the Linux console, there is a catch. There's currently no GUI for this process, which means you'll have to do a bunch of typing, instead of clicking to get the job done.
how to get set upThis article assumes you've all ready got your 2nd hard drive bought, installed, and mounted.
Once you've readied your 2nd hard drive - continue reading.
*note* You don't necessarily need a 2nd hard drive for this to work. You can use many different things, but this article will assume you're working with a 2nd hard drive.
how to back up your hard drive using rsyncIn order to make this more user-friendly, many examples will be used. The examples will have directories that pertain only to my personal situation. You'll have to change the directories for your particular setup.
The process is as follows:
Open a console window and type in the following, but don't press enter yet:
rsync -avnu --progress --stats
I think it'd help a bit if I explained what all that means, so....
- "rsync" means "run the rsync program"
- "-a" means "Backup all sub-directories maintaining all permissions, groups, users, times, and devices."
- the "v" after the "a" means "Be more verbose. Tell me more about what's going on."
- the "n" after the "v" means "Don't actually do anything, just tell me what you're going to do."
- the "u" after the "n" means "Only update stuff. Don't re-copy things with more recent timestamps."
- the "--progress" means "Give me progress updates while you're backing things up."
- the "--stats" means "Let me know exactly what you did after it's all done."
I'm kind of paranoid about my stuff being copied correctly, so I probably go beyond what most people would want to do, but better to be safe than sorry, right?
Now, to continue, you want to input the directory of the mounted drive you want backed up. In my case it's "/stuff/music/" so my command line would look like this:
rsync -avnu --progress --stats /stuff/music/
The last step is to put in the mounted directory of the hard drive you're backing up to. In my case it's "/backup/music/" so the next section would look like this:
rsync -avnu --progress --stats /stuff/music/ /backup/music/
And that should do it for the test run.
*note* If you are backing up anything with sub-directories, it is necessary to include the trailing "/" characters on the end of the directory, e.g. "...music/"
When the program finishes, you'll notice a lot of information on your screen. It'll probably look something like this:
receiving file list ... 6290 files to consider 10957953343edde93f07f77-1.png 10957953343edde93f07f77.png Firefox_wallpaper.png flacs/EnZign/EnZign - Such Is Life.flac flacs/EnZign/EnZign - That We Might Live.flac flacs/EnZign/EnZign - When Hope Is Lost.flac flacs/Original EnZign/The River Of LIfe.flac flacs/Original EnZign/With All My Might.flac flacs/Original EnZign/On My Way.flac flacs/Original EnZign/What Lies Beyond.flac flacs/Original EnZign/Im Cryin.flac flacs/Original EnZign/Eternal Love.flac flacs/Original EnZign/Chosen.flac flacs/Original EnZign/Good Things Come From Above.flac flacs/Original EnZign/Jenny.flac flacs/Original EnZign/Enzign.flac Number of files: 6290 Number of files transferred: 16 Total file size: 111688283491 bytes Total transferred file size: 398411470 bytes Literal data: 0 bytes Matched data: 0 bytes File list size: 296298 Total bytes written: 80 Total bytes read: 296378 wrote 80 bytes read 296378 bytes 20445.38 bytes/sec total size is 111688283491 speedup is 376742.35
If you notice, rsync found 6290 files to back up, but it only set 16 to actually be backed up. Those 16 files are ones I updated this morning, and happened to be the only ones that were needing to be backed up.
Everything looks good...
Now, if the output looks right, go ahead and run the real thing by taking out the "n" option and pressing enter.
rsync -avu --progress --stats /stuff/music/ /backup/music/
That will start the process and you'll see the progress as it happens. When it's done, you should have a shiny new back-up, ready to come to the rescue!
Novell Cool Solutions (corporate web communities) are produced by WebWise Solutions. www.webwiseone.com