|
Metadirectory Server
- Metadirectory engine
- Novell Audit agent
- Service drivers
- Identity Manager Drivers
- NMAS™ methods and schema
- Utilities (including the License Auditing Tool, Application
Tools, and the Novell Audit Setup tool)
|
One of the following operating systems:
- NetWare® 6.5 with the latest Support
Pack
- Novell Open Enterprise Server (OES) with the latest Support
Pack
- Windows* NT, 2000, or 2003 (32-bit) with
the latest Service Pack (2003 64-bit is not supported)
- Linux Red Hat* AS 3.0
- SUSE® Linux Enterprise Server 8 or 9
- Solaris 8, 9, or 10
- AIX 5.2L
One of the following versions of eDirectory.
- eDirectory 8.7.3 with the latest Support
Pack
- eDirectory 8.8 with the latest Support Pack
|
OES, NetWare, Windows, and Linux platforms
(Red Hat and SUSE) support all of the following processors:
- Intel x86 32-bit
- AMD x86 32-bit
- Intel EM64T 32-bit mode
- AMD Athlon64 and Opteron in 32-bit mode
eDirectory 8.8 supports these advanced features:
- Multiple instances of eDirectory on the
same server
- Encrypted attributes
Although eDirectory 8.8 includes support for non-root user
installations, you must install Identity Manager as the root user. |
|
Web-based Administration Server
- Identity Manager and Password Management
- iManager plug-ins
- Driver configurations
|
One of the following operating systems.
The following software.
- Novell iManager 2.5 or 2.6 (includes
of Apache 2.0.52 or later and Tomcat 4.1.18 or later)
|
OES, NetWare, Windows, and Linux platforms
(Red Hat and SUSE) support all of the following processors:
- Intel x86 32-bit
- AMD x86 32-bit
- Intel EM64T 32-bit mode
- AMD Athlon64 and Opteron in 32-bit mode
- Browser support is determined by iManager
2.5. This list presently includes:
-
- Internet Explorer 6, SP1
and above
- Firefox 1.x and above
- Mozilla 1.7 and above
- You must go through the iManager Configuration Wizard
or the Designer utility to install or deploy portal content into
eDirectory.
- If you install iManager 2.5 or 2.6 on the same server
where eDirectory is installed, the version of eDirectory must be
8.7.3 or higher.
- (Windows) The Novell Client™ 4.9 is available
from Novell
Software Downloads.
- When logging into other trees with iManager to manage
remote Identity Manager servers, you might encounter errors if you
use the server name instead of the IP address for the remote server.
|
|
Secure Logging Service
- The Secure Logging Server
- The Platform Agent (client component)
|
For the Secure Logging Server, one of
the following operating systems:
For the Platform Agent, one of the following operating systems:
- NetWare 5.1 and later (with the latest
Support Pack)
- Windows 2000 or 2000 Server, XP, or 2003 Server (32-bit)
with the latest Service Pack (2003 64-bit is not supported)
- Linux Red Hat 7.3, 8, AS, and ES 2.1
- Solaris 8 or 9
- SUSE Linux Enterprise Server 8
|
OES, NetWare, Windows, and Linux platforms
(Red Hat and SUSE) support all of the following processors:
- Intel x86 32-bit
- AMD x86 32-bit
- Intel EM64T 32-bit mode
- AMD Athlon64 and Opteron in 32-bit mode
Minimum Secure Server requirements include:
- A single processor, server-class PC with
a Pentium* II 400 Mhz
- A minimum of 40 MB disk space
- 512 MB RAM
The eDirectory Instrumentation, which allows eDirectory events
to be logged, supports the following versions of eDirectory:
- NDS® 8.xeDirectory 8.6 (NetWare,
Windows, Linux, and Solaris)
- eDirectory 8.7 (NetWare, Windows, Linux, and Solaris)
The NetWare Instrumentation, which allows NetWare events to
be logged, supports the following versions of NetWare:
- NetWare 5.1 SP6
- NetWare 6.0 SP3
- NetWare 6.5 or NetWare 6.5 SP1
- Novell Open Enterprise Server (OES) with the latest
Support Pack
|
|
User Application and Workflow System Service
- Identity Vault access
- IDM User Application storage
- Runs on Linux and Windows
|
SUSE Enterprise Server 9
Windows 2000 Server
Windows 2003 Server |
SUSE ES supports all of the following processors:
- Intel x86 32-bit
- AMD x86 32-bit
- Intel EM64T 32-bit mode
- AMD Athlon64 and Opteron in 32-bit mode
The User Application requires credentials to log in to the
Identity Vault. The credentials used to access the Identity Vault
must:
- Have full rights to the Identity Vault
- Must exist in the Identity Vault before you install
the Identity Manager 3 User Application.
You are prompted for these credentials during installation.
This user is referred to as the User Application Administrator.
The computer where you install the User Application must have
320 MB of storage available.
For Linux:
- Runlevel. The User Application installer
needs X Server (X Windows), so your Linux runlevel must be set to
5 or higher.
- It is recommended that you run the install as a
user without root privileges.
- Make sure the install directory is writable. The
User Application is typically installed using the directory structure novell/idm in
the user’s home directory, but you
can change this default.
|
|
Database Server and Service
|
Included in the User Application product
and works in both local and remote mode:
- JBoss Application Server Version 4.0.2
Included in the User Application product and works in both
local and remote mode:
The following databases are not included, but can be used
in Remote mode only:
- Oracle 9i
- Oracle 10g
- MS SQL 2000
|
NOTE:If you want to implement clustering, you must download and
install JBoss 4.0.3 SP1.
You can use the JBoss Application server to host the User
Application and MySQL, or you can use another supported database.
The User Application uses a database for various tasks, such as
storing User Application configuration data and storing data for
any in-progress workflow activities.
Both the secure logging service and the User Application and
workflow provisioning require a database. You can set up one database
to serve both applications, or you can set up independent databases
for each one. The secure logging service does not include a specific
database.
For JBoss:
- The minimum recommended RAM for JBoss* when
running the User Application is 512 MB.
- The computer where JBoss is installed should have
port 8080 free. JBoss allows Tomcat to use port 8080 by default.
You should install JBoss on a machine that has this port free.
- If the target machine also has an instance of iManager
(or any other application that uses its own instance of Tomcat),
you might end up with multiple Tomcat instances competing for the
same port. You should either shut down other Tomcat instances or set
the others to use a port other than 8080.
For MySQL:
- The computer where MySQL is installed
should have port 63306 free. The User Application installer installs MySQL
at port number 63306 by default to avoid conflicts with any other
MySQL server running on the machine.
|
|
Workstations
- Designer
- iManager web access
|
Designer has been tested on the following
platforms:
Windows:
- Windows 2000 Professional and Windows
2000 Server
- Windows XP Professional
- Windows 2003 Server
Linux:
- SUSE 9.2, 9.3, and 10
- SLES 9 SP1, SP2
- Red Hat Linux 9
- Novell Linux Desktop
- GNOME, KDE, Red Hat Fedora
|
Designer uses Eclipse as its development platform.
Refer to the Eclipse Web
site for platform specific information.
Designer minimum and recommended hardware requirements:
- 1 GHz minimum; recommended 2 GHz or
greater.
- 512 MB RAM minimum; recommended 1 GB RAM or greater.
- 1024 x 768 resolution minimum; recommended 1280
x 1024.
Prerequisite software:
- Microsoft Internet Explorer 6.0 SP1
- Mozilla 1.7
- Mozilla Firefox 1.0.4
|
|
Connected System Server (host on a separate
server running Remote Loader)
- Remote Loader
- Remote Loader configuration tool (Windows only)
- Novell Audit agent
- Driver shim for the connected system
- Tools for the connected system
|
Each driver requires that the connected
system be available and the relevant APIs are provided.
Refer to the Identity
Manager Driver documentation for operating system and connected
system requirements that are specific to each system. |
Each connected application requires individuals
with application specific knowledge and responsibility.
Remote Loader System:
- Windows NT 4.0, Windows 2000, or Windows
2003
- Red Hat Linux AS 3.0
- SUSE ES 8 or SUSE ES 9
- Solaris 8, Solaris 9, or Solaris 10
- AIX 5L v5.2
Java Remote Loader System:
- HP-UX 11i
- OS/400
- zOS
- Should be able to use on any system that has JVM
1.4.2 or higher
|