Novell Documentation: TestConsole - Selecting Test Stations

2.2 Selecting Test Stations

Before you begin testing, some tests may require that you designate the station where the tests are performed. Test stations are identified by their IP addresses.

Figure 2-2 Project Contents panel.

When you open a test project, a Station Address icon appears in the Project Contents pane. When you double-click on the Station Address icon, the Station dialog window appears.

Figure 2-3 Shows the Station Dialog.

TestConsole attempts to detect the IP addresses of any stations on the subnetwork that have loaded TCLink. You can select the test station from the list provided. If the IP address is not visible (for example, on a different subnet), you can type it in the Selection box.

HINT:If the loopback IP address 127.0.0.1 appears in the Select Test Station window, it is an indication that the IP address on the TestConsole client is not set up properly.