10.1 Error Messages
The following section identifies common error messages and the possible causes.
Error Wrong Destination DN
Source:
The status log or DSTrace screen.
Explanation:
The destination DN sent to the driver was wrong or not present.
Possible Cause:
This can occur when a User object was changed in a container not covered in the Subscriber Placement policy.
Action:
Look at changing the Placement policy to include the correct containers.
Error Password Length is to long. Password not set
Source:
The status log or DSTrace screen.
Explanation:
The password sent to the driver was too long and the driver was unable to set the password.
Action:
Shorten the password.
Error Failed to attach to the registry = error #
Source:
The status log or DSTrace screen.
Explanation:
The driver was unable to attach to the system registry. The error was fatal, so the driver will shut down.
Possible Cause:
Check the error code to see possible causes.
Error Failed to attach to the registry retrying = error #
Source:
The status log or DSTrace log.
Explanation:
The driver was unable to attach to the system registry but the error suggested to try again later.
Possible Cause:
Check the error number to see possible causes.
Error Unable to logon as User %S to Domain %S error code = error #
Source:
The status log or DSTrace screen.
Explanation:
The driver was unable to log in as the user in the domain specified.
Possible Cause:
Check the error code to see possible causes.
Error: Missing Poll Rate parameter
Source:
The status log or DSTrace screen.
Explanation:
The poll rate in the driver parameters has not been set.
Action:
Add the poll rate to the driver parameters.
Error: Missing Publisher State parameter
Source:
The status log or DSTrace screen.
Explanation:
This is the first time the driver has been run.
Source:
The status log or DSTrace screen.
Explanation:
An error has occurred and the driver is returning the error.
Source:
The status log or DSTrace screen.
Explanation:
The driver has tried to log in as the user specified in the driver parameters.
Possible Cause:
Check the error number to see possible reasons why logon failed.
ImpersonateLoggedOnUser = error #
Source:
The status log or DSTrace screen.
Explanation:
The driver has tried to impersonate the user.
Possible Cause:
Check the error number to see possible reason why the impersonation failed.
Failed MKDIR directory path = error #
Source:
The status log or DSTrace screen.
Explanation:
The driver attempted to create a directory. MKDIR failed to create a directory path and returned the error #.
Possible Cause:
Check the error number for the reason for the failure.
Failed SharDir directory path
Source:
The status log or DSTrace screen.
Explanation:
The driver attempted to share the directory path with the Everyone account but failed.
ERROR ADD failed, NERR_PasswordTooShort
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to add a user to the domain.
Possible Cause:
The password is too short
ERROR ADD failed, NERR_InvalidComputer
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to add a user to the domain.
Possible Cause:
The computer is invalid.
ERROR ADD failed, NERR_ERROR_ACCESS_DENIED
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to add a user to the domain.
Possible Cause:
Access is denied.
ERROR ADD failed, NERR_NotPrimary
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to add a user to the domain.
Possible Cause:
This is not the primary domain controller.
ERROR ADD failed, NERR_GroupExists
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to add a user to the domain.
Possible Cause:
The group already exists.
ERROR ADD failed, NERR_UserExists
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to add a user to the domain.
Possible Cause:
The user already exists.
ERROR ADD failed, NERR_ServiceCtlBusy
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to add a user to the domain.
Possible Cause:
The service is busy.
ERROR ADD failed, ERROR_INVALID_PARAMETER
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to add a user to the domain.
Possible Cause:
There is an invalid parameter on the driver.
ERROR ADD failed. = error #, username
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to add a username to the domain.
Possible Cause:
It failed because of the error number stated.
ERROR MOIDY failed, NERR_PasswordTooShort
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to modify a user in the domain.
Possible Cause:
The password is too short
ERROR MODIFY failed, NERR_InvalidComputer
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to modify a user in the domain.
Possible Cause:
The computer is invalid.
ERROR MODIFY failed, NERR_ERROR_ACCESS_DENIED
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to modify a user in the domain.
Possible Cause:
Access is denied.
ERROR MODIFY failed, NERR_NotPrimary
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to modify a user in the domain.
Possible Cause:
This is not the primary domain controller.
ERROR MODIFY failed, NERR_GroupExists
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to modify a user in the domain.
Possible Cause:
The group already exists.
ERROR MODIFY failed, NERR_UserExists
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to modify a user in the domain.
Possible Cause:
The user already exists.
ERROR MODIFY failed, NERR_ServiceCtlBusy
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to modify a user in the domain.
Possible Cause:
The service is busy.
ERROR MODIFY failed, ERROR_INVALID_PARAMETER
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to modify a user in the domain.
Possible Cause:
There is an invalid parameter on the driver.
ERROR MODIFY failed. = error #, username
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to modify a username in the domain.
Possible Cause:
It failed because of the error number stated.
ERROR RENAME failed, NERR_PasswordTooShort
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to rename a user in the domain.
Possible Cause:
The password is too short
ERROR RENAME failed, NERR_InvalidComputer
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to rename a user in the domain.
Possible Cause:
The computer is invalid.
ERROR RENAME failed, NERR_ERROR_ACCESS_DENIED
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to rename a user in the domain.
Possible Cause:
Access is denied.
ERROR RENAME failed, NERR_NotPrimary
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to rename a user in the domain.
Possible Cause:
This is not the primary domain controller.
ERROR RENAME failed, NERR_GroupExists
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to rename a user in the domain.
Possible Cause:
The group already exists.
ERROR RENAME failed, NERR_UserExists
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to rename a user in the domain.
Possible Cause:
The user already exists.
ERROR RENAME failed, NERR_ServiceCtlBusy
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to rename a user in the domain.
Possible Cause:
The service is busy.
ERROR RENAME failed, ERROR_INVALID_PARAMETER
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to rename a user in the domain.
Possible Cause:
There is an invalid parameter on the driver.
ERROR RENAME failed. = error #, username
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to rename a username in the domain.
Possible Cause:
It failed because of the error number stated.
ERROR GETINFO failed, NERR_UserNotFound
Source:
The status log or DSTrace screen.
Explanation:
A query was requested and failed because the user want not found.
ERROR GETINFO failed, ERROR_ACCESS_DENIED
Source:
The status log or DSTrace screen.
Explanation:
A query was requested and failed because access was denied.
ERROR GETINFO failed, NERR_InvalidComputer
Source:
The status log or DSTrace screen.
Explanation:
A query was requested and failed because the computer is invalid.
Source:
The status log or DSTrace screen.
Explanation:
A query was requested and failed.
ERROR DELETE failed, NERR_PasswordTooShort
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to delete a user in the domain.
Possible Cause:
The password is too short
ERROR DELETE failed, NERR_InvalidComputer
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to delete a user in the domain.
Possible Cause:
The computer is invalid.
ERROR DELETE failed, NERR_ERROR_ACCESS_DENIED
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to delete a user in the domain.
Possible Cause:
Access is denied.
ERROR DELETE failed, NERR_NotPrimary
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to delete a user in the domain.
Possible Cause:
This is not the primary domain controller.
ERROR DELETE failed, NERR_GroupExists
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to delete a user in the domain.
Possible Cause:
The group already exists.
ERROR DELETE failed, NERR_UserExists
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to delete a user in the domain.
Possible Cause:
The user already exists.
ERROR DELETE failed, NERR_ServiceCtlBusy
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to delete a user in the domain.
Possible Cause:
The service is busy.
ERROR DELETE failed, ERROR_INVALID_PARAMETER
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to delete a user in the domain.
Possible Cause:
There is an invalid parameter on the driver.
Source:
The status log or DSTrace screen.
Explanation:
The Subscriber has attempted to delete a user from the domain.
Possible Cause:
Check the error message for a possible cause.
Source:
The status log or DSTrace screen.
Explanation:
Not enough memory.
Action:
Allocate more memory to Java.
Action:
Add more memory to the server.
LookupAccountName error! error #
Source:
The status log or DSTrace screen.
Explanation:
LookupAccountName was not successful because of error #.
Possible Cause:
Check the error number for a possible cause.
SetSecurityDescriptorDacl error! error #
Source:
The status log or DSTrace screen.
Explanation:
SetSecurityDescriptorDacl was not successful because of error #.
Possible Cause:
Check the error number for a possible cause.
NetShareAdd error! error #
Source:
The status key or DSTrace screen.
Explanation:
NetShareAdd was not successful because of error #.
Possible Cause:
Check the error number for a possible cause.
Action:
What can be done to resolve the problem.
Publisher Error NO MEMORY
Source:
The status log or DSTrace screen.
Explanation:
The Publisher channel ran out of memory.
Action:
Allocate more memory to Java.
Action:
Add more memory to the server.
Source:
The status log or DSTrace screen.
Explanation:
The Publisher channel ran out of memory.
Action:
Allocate more memory to Java.
Action:
Add more memory to the server.
Unable to process Nt4 User data
Source:
The status log or DSTrace screen.
Explanation:
This error occurs when the Subscriber channel was unable to complete a request to the NT domain.