Excelerator Command Help

IMPORTANT: The information in this document was copied from the Excelerator command line help. It does not contain information on Excelerator add-on product commands. It is provided for your convenience only and has not been reviewed for accuracy or completeness.

help go to top

List of available commands:

add	-	add a value to a multi-valued setting
apply	-	make all changes active on the appliance
cancel	-	discard all changes to the appliance since the last apply
clear	-	clear all values for a multi-valued setting
clearscreen	-	clear all text on the screen
export	-	write appliance settings to a file
factorysettings	-	restore appliance to original factory settings
get	-	retrieve a setting from the appliance (alias: list, query)
health	-	information about health of the appliance
identity	-	information about this appliance
import	-	read appliance settings from a file
lock	-	lock the system console
ping	-	test an address to see if the appliance can reach it
purgecache	-	purge all objects from the cache
remove	-	remove a value from a multi-valued setting (alias: delete)
resetlearnedroutes	-	clear all dynamically learned routes
restart	-	re-initialize the appliance
restore	-	restore a configuration file to it's directory
restorefromclones	-	restore clone image over the current appliance image
scan	-	rescan disk drives on the appliance
set	-	change a value on the appliance (alias: put)
shutdown	-	shut the appliance down so the power can be turned off
unlock	-	unlock the system console
updateclones	-	update clone image with the current appliance image
version	-	display the version of the appliance

add go to top

Add a value to a multi-valued setting
syntax: add <Name>=<Value>[,<Name>=<Value> ...]

accelerator - settings for configuring the HTTP accelerator

adminacl - settings for Administration ACLs

alert - settings for configuring alert name server features

authentication - settings for authenticating

certificate - settings for certificates of authority

cluster - settings for configuring appliance clusters

dhcp - settings for configuring dhcp server features

dns - settings for configuring domain name server features

download - settings for http download

eth0 - settings for configuring IP addresses for connection eth0

filter - settings for configuring URL blocking filters

forward - settings for configuring the HTTP forward proxy

ftpaccelerator - settings for configuring the FTP accelerator

ftpforward - settings for configuring the FTP forward proxy

gateway - settings for configuring routing features

icpneighbor - designation of neighboring ICP caches

icpresponder - NOT SUPPORTED, use "add/remove icptrustedlist"

icprouting - settings for configuration of ICP routing

icpserver - list of providers for ICP cache filling

icptrustedlist - settings for configureation of ICP trusted list

ipaclist - settings for IP access control

ipaclist - settings for IP access control

logpush - settings for pushing logs off the appliance

miniftpserver - settings for configuring the miniFTP server

miniwebserver - settings for configuring the miniwebserver

ntp - settings for NTP time synchronization

pinlist - settings for proxy pinning list

purgelist - settings for proxy purging list

smc - settings for configuring streaming media caching

smcservice - settings for configuring streaming media caching services

socks - settings for SOCKS client

transparent - settings for configuring the transparent proxy

wccp - settings for configuring WCCP cache farm memberships

apply go to top

Make all changes active on the appliance
syntax: apply

cancel go to top

Discard all changes that are pending since the last apply command
syntax: cancel

clear go to top

Clear all values assigned to a multi-valued setting
syntax: clear <Name>

accelerator - settings for configuring the HTTP accelerator

adminacl - settings for Administration ACLs

alert - settings for configuring alert name server features

authentication - settings for authenticating

certificate - settings for certificates of authority

cluster - settings for configuring appliance clusters

dhcp - settings for configuring dhcp server features

dns - settings for configuring domain name server features

download - settings for http download

eth0 - settings for configuring IP addresses for connection eth0

filter - settings for configuring URL blocking filters

forward - settings for configuring the HTTP forward proxy

ftpaccelerator - settings for configuring the FTP accelerator

ftpforward - settings for configuring the FTP forward proxy

gateway - settings for configuring routing features

icpmulticastgroup - settings for configuraton of ICP multicast group

icpneighbor - designation of neighboring ICP caches

icpresponder - NOT SUPPORTED, use "clear icptrustedlist"

icprouting - settings for configuration of ICP routing

icpserver - list of providers for ICP cache filling

icptrustedlist - settings for configuration of ICP trusted list

ipaclist - settings for IP access control

logpush - settings for pushing logs off the appliance

miniftpserver - settings for configuring the miniFTP server

miniwebserver - settings for configuring the miniwebserver

ntp - settings for NTP time synchronization

pinlist - settings for proxy pinning list

purgelist - settings for proxy purging list

smc - settings for configuring streaming media caching

smcservice - settings for configuring streaming media caching services

socks - settings for SOCKS client

transparent - settings for configuring the transparent proxy

wccp - settings for configuring WCCP cache farm memberships

clearscreen go to top

This will clear the cache appliance screen
syntax: clearscreen

export go to top

Write current appliance settings to a file
syntax: export <FileName> [floppy]

factorysettings go to top

Restore appliance settings to those that were shipped from the factory
syntax: factorysettings

get go to top

Display a value from the appliance
syntax: get <Name>[,<Name> ...] (alias: list, query)

accelerator - settings for configuring the HTTP accelerator

addons - get list of client side add ons

adminacl - settings for Administration ACLs

alert - settings for configuring alert name server features

authentication - settings for authenticating

cache - settings for global cache options

certificate - settings for certificates of authority

cluster - settings for configuring appliance clusters

comlog - the common cache log on the appliance

configfile - get a configuration file from the Web to the appliance

configfiles - list/delete the configuration files on the appliance

date - the date and time on the appliance

dhcp - settings for configuring dhcp server features

dns - settings for configuring domain name server features

download - settings for http download

downloadSequentially - specify if downloads should be sequential

dsend - the date that daylight saving time ends

dsstart - the date that daylight saving time starts

dstime - the daylight saving time on the appliance

eth0 - settings for configuring IP addresses for connection eth0

extlog - the extended cache log on the appliance

filter - settings for configuring URL blocking filters

floppy - settings for use of the floppy drive on the appliance

forward - settings for configuring the HTTP forward proxy

ftpaccelerator - settings for configuring the FTP accelerator

ftpforward - settings for configuring the FTP forward proxy

gateway - settings for configuring routing features

icpclient - settings for requesting of ICP cache filling

icpmulticast - enable/disable ICP multicast group

icpmulticastgroup - settings for configuration of ICP multicast group

icpneighbor - designation of neighboring ICP caches

icpresponder - NOT SUPPORTED, use "set/get icptrustedlist"

icprouting - settings for configuration of ICP routing

icpserver - list of providers for ICP cache filling

icptrustedlist - settings for configuration of ICP trusted list

ipaclist - settings for IP access control

logpush - settings for pushing logs off the appliance

miniftpserver - settings for configuring the miniFTP server

miniwebserver - settings for configuring the miniwebserver

ntp - settings for NTP time synchronization

pinlist - settings for proxy pinning list

purgelist - settings for proxy purging list

qos - settings for quality of service passthrough

serverpersistence - settings for server persistence settings

smc - settings for configuring streaming media caching

smcservice - settings for configuring streaming media caching services

socks - settings for SOCKS client

stats - display a statistical snapshot of the appliance

timezone - the timezone on the appliance

transparent - settings for configuring the transparent proxy

upgrade - settings for upgrading cache appliance

wccp - settings for configuring WCCP cache farm memberships

health go to top

This will display the health of the appliance
syntax: health

identity go to top

This will display information about this appliance including
manufacturer, serial number, and hardware constraints
syntax: identity

import go to top

Set appliance settings to those found in the given file
syntax: import <FileName> [floppy]

lock go to top

Lock the system console
syntax: lock

ping go to top

Check the visibility of an IP Address from the appliance
syntax: ping <IPAddress>[, <IPAddress>, ...]

purgecache go to top

This will purge all objects from the cache
syntax: purgecache

remove go to top

Remove a value from the list of values for a multi-valued setting
syntax: remove <Name>=<Value>[,<Name>=<Value> ...] (alias: delete)

accelerator - settings for configuring the HTTP accelerator

adminacl - settings for Administration ACLs

alert - settings for configuring alert name server features

authentication - settings for authenticating

certificate - settings for certificates of authority

cluster - settings for configuring appliance clusters

comlog - the common cache log on the appliance

configfile - get a configuration file from the Web to the appliance

configfiles - list/delete the configuration files on the appliance

dhcp - settings for configuring dhcp server features

dns - settings for configuring domain name server features

download - settings for http download

eth0 - settings for configuring IP addresses for connection eth0

extlog - the extended cache log on the appliance

filter - settings for configuring URL blocking filters

forward - settings for configuring the HTTP forward proxy

ftpaccelerator - settings for configuring the FTP accelerator

ftpforward - settings for configuring the FTP forward proxy

gateway - settings for configuring routing features

icpneighbor - designation of neighboring ICP caches

icpresponder - NOT SUPPORTED, use "add/remove icptrustedlist"

icprouting - settings for configuration of ICP routing

icpserver - list of providers for ICP cache filling

icptrustedlist - settings for configureation of ICP trusted list

ipaclist - settings for IP access control

logpush - settings for pushing logs off the appliance

miniftpserver - settings for configuring the miniFTP server

miniwebserver - settings for configuring the miniwebserver

ntp - settings for NTP time synchronization

pinlist - settings for proxy pinning list

purgelist - settings for proxy purging list

smc - settings for configuring streaming media caching

smcservice - settings for configuring streaming media caching services

socks - settings for SOCKS client

transparent - settings for configuring the transparent proxy

wccp - settings for configuring WCCP cache farm memberships

resetlearnedroutes go to top

This will cause the server to discard all learned routes for the appliance
syntax: resetlearnedroutes

restart go to top

This will restart the cache appliance
syntax: restart

restore go to top

Initialize all of the configuration file directories
example: restore initialize
Begin restoring to the specified file
example: restore begin \etc\izer\sslizer.cfg
End restoring to a file
example: restore end
Note: all lines between the 'restore begin' and 'restore end' will
be written to the specified file in the specified directory

restorefromclones go to top

This will restore the original or updated clone image
over the current appliance image. This is done in case of
problems with the current appliance image.
syntax: restorefromclones

scan go to top

This will scan for new hardware devices (hard drives, etc.)
syntax: scan

set go to top

Change the value of a setting on the appliance
syntax: set <Name>=<Value>[,<Name>=<Value> ...] (alias: put)

accelerator - settings for configuring the HTTP accelerator

adminacl - settings for Administration ACLs

alert - settings for configuring alert name server features

authentication - settings for authenticating

cache - settings for global cache options

certificate - settings for certificates of authority

cluster - settings for configuring appliance clusters

configfile - copy floppy configuration file to appliance (for download)

date - the date and time on the appliance

dns - settings for configuring domain name server features

dnsproxy - enable/disable dns proxy on all addresses

download - settings for http download

downloadSequentially - specify if downloads should be sequential

dsend - the date that daylight saving time ends

dsstart - the date that daylight saving time starts

dstime - the daylight saving time on the appliance

eth0 - settings for configuring IP addresses for connection eth0

filter - settings for configuring URL blocking filters

floppy - settings for use of the floppy drive on the appliance

forward - settings for configuring the HTTP forward proxy

ftpaccelerator - settings for configuring the FTP accelerator

ftpforward - settings for configuring the FTP forward proxy

gateway - settings for configuring routing features

icpclient - settings for requesting of ICP cache filling

icpmulticast - enable/disable ICP multicast group

icpmulticastgroup - settings for configuration of ICP multicast group

icpneighbor - designation of neighboring ICP caches

icpresponder - NOT SUPPORTED, use "set/get icptrustedlist"

icprouting - settings for configuration of ICP routing

icpserver - list of providers for ICP cache filling

icptrustedlist - settings for configuration of ICP trusted list

ipaclist - settings for IP access control

logpush - settings for pushing logs off the appliance

miniftpserver - settings for configuring the miniFTP server

miniwebserver - settings for configuring the miniwebserver

ntp - settings for NTP time synchronization

password - set the appliance and telnet passwords

pinlist - settings for proxy pinning list

purgelist - settings for proxy purging list

qos - settings for quality of service passthrough

serverpersistence - settings for server persistence settings

smc - settings for configuring streaming media caching

smcservice - settings for configuring streaming media caching services

snmp - no help settings for this command configuration

ftpforward - settings for configuring the FTP forward proxy

gateway - settings for configuring routing features

icpclient - settings for requesting of ICP cache filling

icpmulticast - enable/disable ICP multicast group

icpmulticastgroup - settings for configuration of ICP multicast group

icpneighbor - designation of neighboring ICP caches

icpresponder - NOT SUPPORTED, use "set/get icptrustedlist"

icprouting - settings for configuration of ICP routing

icpserver - list of providers for ICP cache filling

icptrustedlist - settings for configuration of ICP trusted list

ipaclist - settings for IP access control

logpush - settings for pushing logs off the appliance

miniftpserver - settings for configuring the miniFTP server

miniwebserver - settings for configuring the miniwebserver

ntp - settings for NTP time synchronization

password - set the appliance and telnet passwords

pinlist - settings for proxy pinning list

purgelist - settings for proxy purging list

qos - settings for quality of service passthrough

serverpersistence - settings for server persistence settings

smc - settings for configuring streaming media caching

smcservice - settings for configuring streaming media caching services

snmp - no help settings for this command configuration

socks - settings for SOCKS client

timezone - the timezone on the appliance

transparent - settings for configuring the transparent proxy

upgrade - settings for upgrading cache appliance

wccp - settings for configuring WCCP cache farm memberships

shutdown go to top

This will shut down the cache appliance
syntax: shutdown

unlock go to top

Unlock the system console. When prompted, enter password.
The password to unlock the console is the config_user_password
you specified during the initial configuration of the appliance.
If no password was set, press Enter when prompted for the password.
syntax: unlock

updateclones go to top

This will update the original clone image that was created
in the beginning with the current working appliance image.
This clone image can be restored over the current appliance
image, should there be problems with the current appliance
image.
syntax: updateclones

version go to top

This will display the current version of the cache appliance
syntax: version

add accelerator go to top

Add http accelerators or values to lists
syntax 1: add accelerator=<accelerator name>
syntax 2: add accelerator xxx <parameter>=value where xxx is the accelerator name
parameters:
syntax 1:

Accelerator - add a new accelerator named <accelerator name>

syntax 2:

WebServer - Add another address to named accelerator

Address - Add another IP address

CustomCacheHeader - add a custom cache header

syntax3: add accelerator xxx authentication profile=<value>

Profile - Add Authentication profile to named accelerator

See also
     clear accelerator
     get accelerator
     remove accelerator
     set accelerator

add adminacl go to top

Manipulate Administration ACL lists
syntax: add AdminAcl ClientAddress=<clientIP>,[client,...]
syntax: add AdminAcl ServerAddress=<serverIP>,[serverIP,...]
syntax: remove AdminAcl ClientAddress=<clientIP>
syntax: remove AdminAcl ServerAddress=<serverIP>
syntax: clear AdminAcl ClientAddress
syntax: clear AdminAcl ServerAddress
in ClientAddress list are allowed to administer Excelerator

See also
     clear adminacl
     get adminacl
     remove adminacl
     set adminacl

add alert go to top

Add syslog alert to the appliance
syntax: add alert [options] = <value>
syslogserver - syslog server

emailserver	-	SMTP email server
emailreceipt	-	email recipient

value = [ip address|hostname]

See also
     clear alert
     get alert
     remove alert
     set alert

add authentication go to top

Command or type or parameter or value conflict

add certificate go to top

Add a certificate of authority
syntax: add certificate name=<name>

See also
     clear certificate
     get certificate
     remove certificate
     set certificate

add cluster go to top

Add a server or service to the cluster
syntax: add cluster server | service=<Name>

server - Name of new server managed by the cluster

service - Name of new service managed by the cluster

See also
     clear cluster
     get cluster
     remove cluster
     set cluster

add dhcp go to top

syntax: add dhcp address = <IPAddress>[server]

See also
     clear dhcp
     get dhcp
     remove dhcp
     set dhcp

add dns go to top

Add a DNS server reference to the appliance
syntax: add dns server=<IPAddress>[,server=<IPAddress> ...]

server - IP address of a DNS server

See also
     clear dns
     get dns
     remove dns
     set dns

add download go to top

Add a new site to download
syntax: add download=label
Note: Label is either a name supplied when entering the download
information or a block number called block1, block2,...,block9999

See also
     clear download
     get download
     remove download
     set download

add eth0 go to top

Add an address to the given network connection
syntax 1: add eth0 address=<IPaddr>,mask=<mask>[,address=<IPaddr> ...]
syntax 2: add eth0 address=<IPaddr>/<mask>
syntax 3: add eth0 address=<IPaddr>/<8-30> -- CIDR format
Syntax2 example: add xxx address = 10.1.1.1/255.255.255.0
Syntax3 example: add xxx address = 10.1.1.1/24

address	-	IP address to be assigned to this connection
mask	-	subnet mask for an address assigned to this connection
nat	-	nat status for an address assigned to this connection

See also
     clear eth0
     get eth0
     remove eth0
     set eth0

add filter go to top

Add a new URL blocking filter service or override URL mask
syntax 1: add filter service=<sn> [,account=<aname>]
sn - name used to identify the service

aname	-	account name for the service
apassword	-	account password for the service
url	-	fully qualified URL of the configuration file to download
syntax 2: add filter override=<urlmask> [,alwaysallow=<yes\|no>]
urlmask	-	URL mask to use for auto allow/block override
alwaysallow	-	yes (auto allow) or no (auto block)
syntax 3: add filter bypass=<IP Address:port>

See also
     clear filter
     get filter
     remove filter
     set filter

add forward go to top

Add an existing address or authentication profile to the forward proxy service
syntax1: add forward <parameter> = <value>
parameters: [default value] (possible values)
address [none] (any) - format: aa.aa.aa.aa/mm.mm.mm.mm
where aa is the address and mm is the netmask
CustomCacheHeader [none] (any)
- add a custom cache header
syntax2: add forward authentication profile=<value>
Profile - Add Authentication profile

See also
     clear forward
     get forward
     remove forward
     set forward

add ftpaccelerator go to top

Add ftp accelerators to lists
syntax: add ftpaccelerator=<xxx>
syntax: add ftpaccelerator xxx <parameter=value>
of the FTP server
example: add ftpaccelerator ftp.xyz.com enable=yes
example: add ftpaccelerator 10.1.1.1 enable=yes

add ftpforward go to top

Add an existing address to the FTP proxy service
syntax: add ftpforward <parameter> = <value>
parameters: [default value] (possible values)
address [none] (any) - format: aa.aa.aa.aa where aa is a decimal number.

See also
     clear ftpforward
     get ftpforward
     remove ftpforward
     set ftpforward

add gateway go to top

Add a gateway to the router table
The syntax is of three types - default, host and network
default: add gateway nexthop=<IPAddr>
host : add gateway nexthop=<IPAddr>,address=<Host IPAddr>
network: add gateway nexthop=<IPAddr>,address=<Subnet Addr>,mask=<Mask>
(optional additional parameters: [metric=<distance>][,active=yes|no])

See also
     clear gateway
     get gateway
     remove gateway
     set gateway

add icpneighbor go to top

Add can be used to add icp neighbor hostnames and domains
For ICP neighbor hostname use:
syntax: add icpneighbor=<hostname>
For ICP neighbor hostname domains use:
syntax: add icpneighbor <hostname> domain=<domain>

See also
     clear icpneighbor
     get icpneighbor
     remove icpneighbor
     set icpneighbor

add icpresponder go to top

NOT SUPPORTED - use "add icptrustedlist address"

See also
     clear icpresponder
     get icpresponder
     remove icpresponder
     set icpresponder

add icprouting go to top

Add a host name or address to Local Domain or Stop list
syntax: add icprouting <parameter> = value
parameters: [default value] (possible values)
LocalDomain [none] (host name or ip address)
StopList [none] (host name or ip address)

See also
     clear icprouting
     get icprouting
     remove icprouting
     set icprouting

add icpserver go to top

Add icp server settings to a list
syntax: add icpserver <parameter> = <value>
parameters:

MultiCastGroup	-	NOT SUPPORTED, use "set icpmulticastgroup"
ClientList	-	NOT SUPPORTED, use "add icptrustedlist"

See also
     clear icpserver
     get icpserver
     remove icpserver
     set icpserver

add icptrustedlist go to top

Add a trusted address to the trusted list
syntax: add icptrustedlist <parameter> = value
parameters: [default value] (possible values)

Address

[none] (host name or ip address)

add ipaclist go to top

Add list items for the IP access control list
syntax1: add ipaclist source=<ip, subnet, range, or DNS>
example: add ipaclist source=10.0.0.0
example: add ipaclist source=10.1.1.1-10.1.1.90
example: add ipaclist source=www.foo.com
syntax2: add ipaclist dest=<ip, subnet, range, or DNS>
example: add ipaclist dest=10.0.0.0
example: add ipaclist dest=10.1.1.1-10.1.1.90
example: add ipaclist dest=www.foo.com

See also
     clear ipaclist
     get ipaclist
     remove ipaclist
     set ipaclist

add logpush go to top

Success

See also
     clear logpush
     get logpush
     remove logpush
     set logpush

add miniftpserver go to top

Add an existing address to the mini FTP server
syntax: add miniftpserver <parameter> = <value>
address [none] (any) - format: aa.aa.aa.aa where aa is a decimal number.

See also
     clear miniftpserver
     get miniftpserver
     remove miniftpserver
     set miniftpserver

add miniwebserver go to top

No help for that command.

See also
     clear miniwebserver
     get miniwebserver
     remove miniwebserver
     set miniwebserver

add ntp go to top

Add an NTP server address to the list of servers
syntax: add ntp server=<IPAddress>

See also
     clear ntp
     get ntp
     remove ntp
     set ntp

add pinlist go to top

See also
     clear pinlist
     get pinlist
     remove pinlist
     set pinlist

add purgelist go to top

Add a proxy purging entry to the current list
syntax: add purgelist urlmask=<urlmask>

See also
     clear purgelist
     get purgelist
     remove purgelist
     set purgelist

add smc go to top

Add values to SMC parameter lists
syntax: add smc upstreamProxyAddress=<ipaddress>
Try "set smc ?" for other parameters

See also
     clear smc
     get smc
     remove smc
     set smc

add smcservice go to top

Add SMC service to services list
syntax: add smcservice=<8 character alphanumeric service name>
syntax: add smcservice <name> address=<listening ipaddress>
syntax: add smcservice <name> originAddress=<origin ipaddress>
example: add smcservice strmsvc address=10.1.1.1
example: add smcservice strmsvc originaddress=100.1.1.1
Try "set smcservice <name> ?" for other parameters

See also
     clear smcservice
     get smcservice
     remove smcservice
     set smcservice

add socks go to top

Add an address to the socks client bypass list
syntax: add socks <parameter> = <value>
parameters: [default value] (possible values)
ByPassList [none] (any) - add local IP address

See also
     clear socks
     get socks
     remove socks
     set socks

add transparent go to top

Add a value to the transparent proxy configuration list
syntax1: add transparent <parameter> = <value>
parameters: [default value] (possible values)
Port [none] (1-65535) - add port
Address [none] (any) - add local IP address
CustomCacheHeader [none] (any)
- add a custom cache header
syntax2: add transparent authentication profile=<value>
Profile - Add Authentication profile

See also
     clear transparent
     get transparent
     remove transparent
     set transparent

add wccp go to top

Set WCCP options
syntax: set wccp [parameter] = <value>
enable - set the WCCP enable state

proxyname	-	set the WCCP name for the appliance
farmname	-	set the WCCP cache farm name of router
router	-	set the WCCP router IP address
cache	-	set the WCCP cache IP address
version	-	set the WCCP protocol version
routergroup	-	set the WCCP router group
service	-	set the WCCP service group

See also
     clear wccp
     get wccp
     remove wccp
     set wccp

clear accelerator go to top

Clear http accelerators or values from lists
syntax 1: clear accelerator
syntax 2: clear accelerator xxx <parameter> where xxx is the accelerator name
Parameters for syntax 2:

WebServer	-	Clear all Web Servers in list
Address	-	Clear all proxy ip addresses in list
CustomCacheHeader	-	Clear all custom cache headers
syntax3: Clear accelerator xxx authentication profile

Profile - Clear all Authentication profiles in list

See also
     add accelerator
     get accelerator
     remove accelerator
     set accelerator

clear adminacl go to top

See also
     add adminacl
     get adminacl
     remove adminacl
     set adminacl

clear alert go to top

Clear syslog alert to the appliance
syntax: clear alert [options]
syslogserver - syslog server

emailserver	-	SMTP email server
emailreceipt	-	email recipient

See also
     add alert
     get alert
     remove alert
     set alert

clear authentication go to top

Success (use the APPLY command to enforce changes)

clear cluster go to top

Clear all servers or services within the cluster
syntax: clear cluster server | service

server - Remove all servers from the cluster

service - Remove all services from the cluster

See also
     add cluster
     get cluster
     remove cluster
     set cluster

clear dhcp go to top

Clear all DHCP servers assigned to the appliance
syntax: clear dhcp

See also
     add dhcp
     get dhcp
     remove dhcp
     set dhcp

clear dns go to top

Clear all DNS servers assigned to the appliance
syntax: clear dns server

See also
     add dns
     get dns
     remove dns
     set dns

clear download go to top

Clear all sites from the download list
syntax: clear download

See also
     add download
     get download
     remove download
     set download

clear eth0 go to top

Clear all IP addresses assigned to the specified network connection
syntax: clear eth0 address

See also
     add eth0
     get eth0
     remove eth0
     set eth0

clear filter go to top

Clear all URL blocking filter services or override URL masks
syntax 1: clear filter service
syntax 2: clear filter override
syntax 3: clear filter bypass

See also
     add filter
     get filter
     remove filter
     set filter

clear forward go to top

Clear all forward proxy server addresses or authentication profiles
syntax1: clear forward address
syntax2: clear forward customcacheheader
syntax3: clear forward authentication profile

See also
     add forward
     get forward
     remove forward
     set forward

clear ftpaccelerator go to top

Clear ftp ftpaccelerator or values from lists
syntax: clear ftpaccelerator
syntax: clear ftpaccelerator xxx where xxx is any valid DNS name or IP address of the FTP server
example: remove ftpaccelerator=10.1.1.1

clear ftpforward go to top

Clear all FTP proxy server addresses
syntax: clear ftpforward address

See also
     add ftpforward
     get ftpforward
     remove ftpforward
     set ftpforward

clear gateway go to top

Clear the list of gateways for the router
syntax: clear gateway

See also
     add gateway
     get gateway
     remove gateway
     set gateway

clear icpmulticastgroup go to top

Clear icp multicastgroup settings
syntax: clear icpmulticastgroup

clear icpneighbor go to top

Clear all icp neighbor hostnames or domains
For ICP neighbor hostname use:
syntax: clear icpneighbor
syntax: clear icpneighbor <hostname> domain

See also
     add icpneighbor
     get icpneighbor
     remove icpneighbor
     set icpneighbor

clear icpresponder go to top

NOT SUPPORTED - use "clear icptrustedlist address"

See also
     add icpresponder
     get icpresponder
     remove icpresponder
     set icpresponder

clear icprouting go to top

Clear all host names or addresses from Local Domain or Stop list
syntax: Clear icprouting <parameter>
parameters:
LocalDomain
StopList

See also
     add icprouting
     get icprouting
     remove icprouting
     set icprouting

clear icpserver go to top

Clear all icp server settings within a list
syntax: clear icpserver <parameter>
parameters:

MultiCastGroup	-	NOT SUPPORTED, use "clear icpmulticastgroup"
ClientList	-	NOT SUPPORTED, use "clear icptrustedlist address"

See also
     add icpserver
     get icpserver
     remove icpserver
     set icpserver

clear icptrustedlist go to top

Clear icp trusted addresses
syntax: clear icptrustedlist Address

clear ipaclist go to top

Clears all items from list for the IP access control list
syntax1: clear ipaclist source
syntax2: clear ipaclist dest

See also
     add ipaclist
     get ipaclist
     remove ipaclist
     set ipaclist

clear logpush go to top

Success (use the APPLY command to enforce changes)

See also
     add logpush
     get logpush
     remove logpush
     set logpush

clear miniftpserver go to top

Clear all mini FTP server addresses
syntax: clear miniftpserver address

See also
     add miniftpserver
     get miniftpserver
     remove miniftpserver
     set miniftpserver

clear miniwebserver go to top

No help for that command.

See also
     add miniwebserver
     get miniwebserver
     remove miniwebserver
     set miniwebserver

clear ntp go to top

Clear all NTP server addresses from list and disable NTP time synchronization
syntax: clear ntp

See also
     add ntp
     get ntp
     remove ntp
     set ntp

clear pinlist go to top

Clear all proxy pinning entries from the current list
syntax: clear pinlist [urlmask]

See also
     add pinlist
     get pinlist
     remove pinlist
     set pinlist

clear purgelist go to top

Clear all proxy purging entries from the current list
syntax: clear purgelist [urlmask]

See also
     add purgelist
     get purgelist
     remove purgelist
     set purgelist

clear smc go to top

Remove all values from SMC parameter lists
syntax: clear smc upstreamProxyAddress
Try "set smc ?" for other parameters

See also
     add smc
     get smc
     remove smc
     set smc

clear smcservice go to top

Clear all values from SMC parameter lists
syntax: clear smcservice=<service name>
syntax: clear smcservice <name> address=<listening ipaddress>
syntax: clear smcservice <name> originAddress=<origin ipaddress>
example: clear smcservice strmsvc address
example: clear smcservice strmsvc originaddress

See also
     add smcservice
     get smcservice
     remove smcservice
     set smcservice

clear socks go to top

Clear all the addresses in the socks client list
syntax : clear socks <parameter> = <value>
example: clear socks bypasslist = 10.1.1.1
parameter:

server	-	sock server
bypasslist	-	sock bypasslist

value = IP address of sock server or bypasslist

See also
     add socks
     get socks
     remove socks
     set socks

clear transparent go to top

Clear transparent proxy values
syntax1: clear transparent <parameter> = <value>
parameters: [default value] (possible values)

Port	-	clear all ports
Address	-	clear all local IP addresses
CustomCacheHeader	-	clear all custom cache headers
syntax2: clear transparent authentication profile

See also
     add transparent
     get transparent
     remove transparent
     set transparent

clear wccp go to top

See also
     add wccp
     get wccp
     remove wccp
     set wccp

get accelerator go to top

syntax1: get accelerator xxx
syntax2: get accelerator xxx <parameter>
example: get accelerator name1 enable
syntax3: get accelerator xxx authentication
syntax4: get accelerator xxx authentication <parameter>
example: get accelerator name1 authentication enable
parameters:

Enable	-	Is Accelerator Enabled?
Name	-	User supplied name (up to 8 characters)
Port	-	Accelerator Port
DnsName	-	DNS Name For Web Server
WebServerPort	-	Web Server Port
WebServer	-	Web Server IP Address
Address	-	Proxy IP Address
SendXForwardedForHeader	-	Send XForwardedFor
FillHostHeaderType	-	Determines how host header is set valid values are: ForwardReceivedHost or AlternateHost
AltHostName	-	Name to use in host header if AlternateHost is set
HostMismatchError	-	Give error when received host name does not match accelerator host name
CustomCacheHeaderEnable	-	are custom cache headers enabled
CustomCacheHeader	-	custom cache header
SSLPort	-	SSL Authentication Port
SSLKeyId	-	SSL Authentication key
TunnelTraffic	-	Is accelerator being used as a tunnel
TunnelOnlySSL	-	Is the tunnel restricted to only SSL traffic
Authentication	-	Authentication settings
Enable	-	Is authentication enabled
Profile	-	List authentication profiles
SSLMaxIdleTime	-	Max idle time for Authentication
PromptOnFailure	-	Prompt for username/password if mutual fails
SecureX	-	Secure Exchange settings
Enable	-	Is Secure Exchange enabled
Port	-	Secure Exchange port
KeyId	-	Key used for SSL encryption/decryption
SecureToWeb	-	Is channel to web server secure
TrustedRoots	-	Trusted roots for secure communication to web server
InteractiveHandshake	-	Is handshake interactive
AcceptAnyRoot	-	Accept any root
AllowCacheAtBrowser	-	Allow secure pages to be cached at the browser
PathRule	-	Path based multi-homing settings
MultiHomeMaster	-	Master accelerator name
SubPath	-	Subpath accelerated by this accelerator
Type	-	Subpath type (StartsWith or EndsWith)
Strip	-	Strip the subpath from the URL
ComLog	-	is common log enabled
ComLogRollOption	-	roll common log by size or by time
ComLogRollSize	-	roll common log when file exceeds size in MegaBytes
ComLogRollPeriod	-	roll common log after given number of hours
ComLogRollDay	-	roll common log on given day
ComLogRollTime	-	roll common log at given time
ComLogRollTimeZone	-	use local or GMT time for common log
ComLogDeleteOption	-	delete common log files by age or by number of files
ComLogDeleteMaxTime	-	delete common log files after given number of hours
ComLogDeleteMaxFiles	-	delete oldest common log log files if more than max
ExtLog	-	is extended log enabled
ExtLogRollOption	-	roll extended log by size or by time
ExtLogRollSize	-	roll extended log when file exceeds size in MegaBytes
ExtLogRollPeriod	-	roll extended log after given number of hours
ExtLogRollDay	-	roll extended log on given day
ExtLogRollTime	-	roll extended log at given time
ExtLogRollTimeZone	-	use local or GMT time for extended log
ExtLogDeleteOption	-	delete extended log files by age or by number of files
ExtLogDeleteMaxTime	-	delete extended log files after given number of hours
ExtLogDeleteMaxFiles	-	delete oldest extended log files if more than max
ExtLogUserName	-	enable UserName extended log field
ExtLogServerIP	-	enable ServerIP extended log field
ExtLogSiteName	-	enable SiteName extended log field
ExtLogMethod	-	enable Method extended log field
ExtLogUri	-	enable Uri extended log field
ExtLogUriStem	-	enable UriStem extended log field
ExtLogUriQuery	-	enable UriQuery extended log field
ExtLogHttpVersion	-	enable HttpVersion extended log field
ExtLogHttpStatus	-	enable HttpStatus extended log field
ExtLogBytesSent	-	enable BytesSent extended log field
ExtLogBytesReceived	-	enable BytesReceived extended log field
ExtLogTimeTaken	-	enable TimeTaken extended log field
ExtLogUserAgent	-	enable UserAgent extended log field
ExtLogCookie	-	enable Cookie extended log field
ExtLogReferer	-	enable Referer extended log field
ExtLogCachedStatus	-	enable CachedStatus extended log field
ExtLogFillProxyIP	-	enable FillProxyIP extended log field
ExtLogOriginIP	-	enable OriginIP extended log field

See also
     add accelerator
     clear accelerator
     remove accelerator
     set accelerator

get addons go to top

Get list of client side add ons which can be launched
syntax: get addons

See also
     add addons
     clear addons
     remove addons
     set addons

get adminacl go to top

List the Administration ACL parameters and current settings
syntax: get AdminAcl
syntax: get AdminAcl <parameter>
parameters:
ClientListEnable
ClientAddress
ServerAddress

See also
     add adminacl
     clear adminacl
     remove adminacl
     set adminacl

get alert go to top

Get the list of alert that are part of the syslog
syntax: get alert

See also
     add alert
     clear alert
     remove alert
     set alert

get authentication go to top

Get the parameters for an authentication profile
syntax: get authentication
syntax: get authentication xxx
syntax: get authentication xxx <parameter>
example: get authentication name1 type
parameters:

Type	-	Prompted authentication type (MUTUAL \| LDAP \| RADIUS \| NONE)
syntax: get authentication xxx mutual <parameter>

example: get authentication name1 mutual trustedrootfile
parameters:

TrustedRootFile	-	Lists trusted roots
syntax: get authentication xxx ldap <parameter>

example: get authentication name1 ldap enablesecure
parameters:

Address	-	Gets the LDAP server ip address
Port	-	Gets the LDAP server port
EnableSecure	-	Is secure transmission to LDAP server enabled?
ClientCertFile	-	Gets certificate used with LDAP server
LoginType	-	Returns the login type (DN \| EMAIL \| FIELDNAME)
SearchBase	-	Gets the root for user searches (used with EMAIL \| FIELDNAME)
bindanonymous	-	Binds anonymously to ldap server?
bindusername	-	Binds as this user to ldap server
bindpassword	-	Password for user bind to ldap server
fieldname	-	Defines the field used for ldap search
syntax: get authentication xxx radius <parameter>

example: get authentication name1 radius secret
parameters:

Address	-	Gets the RADIUS server ip address
Port	-	Gets the RADIUS server port
Secret	-	Returns the secret shared with the RADIUS server
ReplyTime	-	Gets the amount of time to wait for a reply in seconds
ResendTime	-	Gets the amount of time between resends in seconds

get cache go to top

List the cache parameters and current settings
syntax: get cache
syntax: get cache <parameter>
parameters:

IgnoreRefresh	-	Ignore Refresh
FilterCookies	-	Filter Cookies
ToOriginServers	-	To Origin Servers
ToBrowsers	-	To Browsers
ReadAhead	-	Read Ahead
MaxReadAheadRequest	-	Max Read Ahead Request
Private	-	Enable Private Cache Option
ContinueAcceleratorFillTime	-	Accelerator Fills Option
ContinueForwardFillTime	-	Forward Fills Option
HttpRetries	-	HTTP Retries
HttpMaxTime	-	HTTP Max Time
HttpMinTime	-	HTTP Min Time
HttpDefaultTime	-	HTTP Default Time
FtpRevalidateTime	-	FTP Revalidate Time
GopherRevalidateTime	-	Gopher Revalidate Time
DnsNegativeLookup	-	DNS Negative Lookup
DnsMaxEntryTTL	-	DNS Max Entry TTL
DnsMinEntryTTL	-	DNS Min Entry TTL
ToBrowsers	-	To Browsers
ReadAhead	-	Read Ahead
MaxReadAheadRequest	-	Max Read Ahead Request
Private	-	Enable Private Cache Option
ContinueAcceleratorFillTime	-	Accelerator Fills Option
ContinueForwardFillTime	-	Forward Fills Option
HttpRetries	-	HTTP Retries
HttpMaxTime	-	HTTP Max Time
HttpMinTime	-	HTTP Min Time
HttpDefaultTime	-	HTTP Default Time
FtpRevalidateTime	-	FTP Revalidate Time
GopherRevalidateTime	-	Gopher Revalidate Time
DnsNegativeLookup	-	DNS Negative Lookup
DnsMaxEntryTTL	-	DNS Max Entry TTL
DnsMinEntryTTL	-	DNS Min Entry TTL
DnsMaxEntryThreshold	-	DNS Max Entry Threshold
DnsTransport	-	DNS Transport
TcpConnectionTimeout	-	TCP Connection Timeout
TcpKeepaliveInterval	-	TCP Keep Alive Interval
TcpDataReadTimeout	-	TCP Data Read Timeout
TcpIdleServerTimeout	-	TCP Idle Server Timeout
TcpIdleClientTimeout	-	TCP Idle Client Timeout
ObjNoCacheForQuestionMark	-	Object No Cache For Question Mark
ObjNoCacheForCgi	-	Object No Cache For CGI

See also
     add cache
     clear cache
     remove cache
     set cache

get certificate go to top

See also
     add certificate
     clear certificate
     remove certificate
     set certificate

get cluster go to top

Get general information about the cluster
syntax: get cluster
syntax: get cluster <parameter>
Paramters:

Name	-	Name assigned to cluster
Interval	-	Time in seconds between cluster reconfigures
Heartbeat	-	Time in ticks between signaling cluster members
Alert	-	Time in ticks before sending alerts
JoinTimeout	-	Time in ticks before a join times out
SuspectedFailure	-	Time in ticks before a server is suspected down
ConfirmedFailure	-	Time in ticks before a server is confirmed down
Subnet	-	Address that identifies the subnet
Mask	-	Subnet mask
Enable	-	Enable or disable the cluster
Server	-	List of servers participating in the cluster
Service	-	List of services in the cluster

Note: A tick is equal to 55ms or approximately 20 ticks per second.

See also
     add cluster
     clear cluster
     remove cluster
     set cluster

get comlog go to top

Get list of common cache logs on the appliance
syntax: get comlog [<directory>]

See also
     add comlog
     clear comlog
     remove comlog
     set comlog

get configfile go to top

Get (immediately) configuration file from web
syntax: get configfile <url>[|<username>|<password>] [floppy]
example: get configfile http://www.xyz.com/ex/update.nas floppy
example: get configfile http://www.xyz.com/ex/update.nas|joe|1x3&b
example: get configfile https://www.xyz.com/ex/update.nas|joe|1x3&b

See also
     add configfile
     clear configfile
     remove configfile
     set configfile

get configfiles go to top

Get list of configuration files on the appliance
syntax: get configfiles [floppy]

See also
     add configfiles
     clear configfiles
     remove configfiles
     set configfiles

get date go to top

Get date and time from the appliance
syntax 1: get date [year][,month][,day][,time]

See also
     add date
     clear date
     remove date
     set date

get dhcp go to top

syntax: get dhcp

See also
     add dhcp
     clear dhcp
     remove dhcp
     set dhcp

get dns go to top

List settings about the specified DNS configuration attribute
syntax: get dns [server | alias | domain | enablemonitor]

server - list all DNS servers

alias - alternate name for this server

domain - list the domain context for this appliance

enablemonitor - monitor state of DNS servers with periodic ping

See also
     add dns
     clear dns
     remove dns
     set dns

get download go to top

List the value for specified download parameter or all download parameters
syntax: get download - show a labeled list of downloads
syntax: get download xxx - show all download paramters for xxx
syntax: get download xxx parameter - shows specified parameter for xxx
information or a block number called block1, block2,...,block9999
parameters:

Url	-	HTTP URL
Enable	-	Enable this download
Level	-	Levels to download
Link	-	Follow links to other hosts
MaxRequest	-	Maximum number of concurrent request
MaxObject	-	Maximum number of objects to download
MaxData	-	Maximum amount of data to download
Frequency	-	Download Frquency (OneTimeOnly, OnceADay, Daily, Immediately)
OneTimeOnlyDay	-	Day of one time only download
OneTimeOnlyMonth	-	Month of one time only download
OneTimeOnlyYear	-	Year of one time only download
OneTimeOnlyTime	-	Download at this time
OneTimeOnlyZone	-	Use Local or GMT time for One Time Only download
OnceADayTime	-	Download at this time
OnceADayZone	-	Use Local or GMT time for Once a day download
DailyStartTime	-	Start downloads at this time
Url	-	HTTP URL
Enable	-	Enable this download
Level	-	Levels to download
Link	-	Follow links to other hosts
MaxRequest	-	Maximum number of concurrent request
MaxObject	-	Maximum number of objects to download
MaxData	-	Maximum amount of data to download
Frequency	-	Download Frquency (OneTimeOnly, OnceADay, Daily, Immediately)
OneTimeOnlyDay	-	Day of one time only download
OneTimeOnlyMonth	-	Month of one time only download
OneTimeOnlyYear	-	Year of one time only download
OneTimeOnlyTime	-	Download at this time
OneTimeOnlyZone	-	Use Local or GMT time for One Time Only download
OnceADayTime	-	Download at this time
OnceADayZone	-	Use Local or GMT time for Once a day download
DailyStartTime	-	Start downloads at this time
DailyEndTime	-	Stop downloads at this time
DailyZone	-	Use Local or GMT time for daily downloads
DailyFrequency	-	Download every n hours
EnableSelectDays	-	Only download on selected days
SelectedDays	-	Download on these days
ClientUsername	-	Username for the download site
ServerUesrname	-	Password for the download site

See also
     add download
     clear download
     remove download
     set download

get downloadSequentially go to top

Shows if downloads are loaded sequentially or not
syntax: get downloadSequentially enable

get dsend go to top

Get daylight saving end time from the appliance
syntax: get dsend

See also
     add dsend
     clear dsend
     remove dsend
     set dsend

get dsstart go to top

Get daylight saving start time from the appliance
syntax: get dsstart

See also
     add dsstart
     clear dsstart
     remove dsstart
     set dsstart

get dstime go to top

Get daylight saving time from the appliance (on/off)
syntax: get dstime

See also
     add dstime
     clear dstime
     remove dstime
     set dstime

get eth0 go to top

List settings about the specified network connection
syntax: get eth0 [address | mask]

address - display all addresses assigned to this connection

mask - display all subnets assigned to this connection

nat - display all nat status

See also
     add eth0
     clear eth0
     remove eth0
     set eth0

get extlog go to top

Get list of extended cache logs on the appliance
syntax: get extlog [<directory>]

See also
     add extlog
     clear extlog
     remove extlog
     set extlog

get filter go to top

name used to identify the category within a service

(Notes: All service parameters will be displayed if nothing is entered
after the word 'service'. A list of all services will be displayed
if <sn> is omitted. A list of all categories will be displayed if
if <cn> is omitted.
syntax 2: get filter override <urlmask> [alwaysallow]
after the word 'override'.)
syntax 3: get filter [logopts | bypass]
| comlogdeletemaxfiles | comlogrollperiod | comlogrolltime
| comlogrollday | comlogrolltimezone | comlogdeleteoption ]

See also
     add filter
     clear filter
     remove filter
     set filter

get floppy go to top

Get the settings for use of the floppy drive
syntax: get floppy

See also
     add floppy
     clear floppy
     remove floppy
     set floppy

get forward go to top

Show parameters and values for the HTTP Proxy Server
syntax1: get forward or get forward <parameter>
syntax2: get forward authentication
syntax3: get forward authentication <parameter>
example: get forward authentication enable
parameters:

Enable	-	is HTTP proxy enabled
Port	-	port to proxy on
Address	-	HTTP forward proxy address
WpadEnable	-	is web proxy auto-discovery enabled
CustomCacheHeaderEnable	-	are custom cache headers enabled
CustomeCacheHeader	-	custom cache header
SSLPort	-	port used for ssl communication
SSLKeyId	-	the name of the certificate to use for ssl communication
AllowConnect	-	are connects allowed
ConnectAllowOnlySSL	-	must connects use SSL
SendXForwardedForHeader	-	are X-Forwarded-For headers enabled
Authentication	-	Authentication settings
PromptOnFailure	-	Prompt for username/password if mutual fails
ComLog	-	is common log enabled
ComLogRollOption	-	roll common log by size or by time
ComLogRollSize	-	roll common log when file exceeds size in MegaBytes
ComLogRollPeriod	-	roll common log after given number of hours
ComLogRollDay	-	roll common log on given day
ComLogRollTime	-	roll common log at given time
ComLogRollTimeZone	-	use local or GMT time for common log
ComLogDeleteOption	-	delete common log files by age or by number of files
ComLogDeleteMaxTime	-	delete common log files after given number of hours
ComLogDeleteMaxFiles	-	delete oldest common log log files if more than max
ExtLog	-	is extended log enabled
ExtLogRollOption	-	roll extended log by size or by time
ExtLogRollSize	-	roll extended log when file exceeds size in MegaBytes
ExtLogRollPeriod	-	roll extended log after given number of hours
ExtLogRollDay	-	roll extended log on given day
ExtLogRollTime	-	roll extended log at given time
ExtLogRollTimeZone	-	use local or GMT time for extended log
ExtLogDeleteOption	-	delete extended log files by age or by number of files
ExtLogDeleteMaxTime	-	delete extended log files after given number of hours
ExtLogDeleteMaxFiles	-	delete oldest extended log files if more than max
ExtLogUserName	-	enable UserName extended log field
ExtLogServerIP	-	enable ServerIP extended log field
ExtLogSiteName	-	enable SiteName extended log field
ExtLogMethod	-	enable Method extended log field
ExtLogUri	-	enable Uri extended log field
ExtLogUriStem	-	enable UriStem extended log field
ExtLogUriQuery	-	enable UriQuery extended log field
ExtLogHttpVersion	-	enable HttpVersion extended log field
ExtLogHttpStatus	-	enable HttpStatus extended log field
ExtLogBytesSent	-	enable BytesSent extended log field
ExtLogBytesReceived	-	enable BytesReceived extended log field
ExtLogTimeTaken	-	enable TimeTaken extended log field
ExtLogUserAgent	-	enable UserAgent extended log field
ExtLogCookie	-	enable Cookie extended log field
ExtLogReferer	-	enable Referer extended log field
ExtLogCachedStatus	-	enable CachedStatus extended log field
ExtLogFillProxyIP	-	enable FillProxyIP extended log field
ExtLogOriginIP	-	enable OriginIP extended log field

See also
     add forward
     clear forward
     remove forward
     set forward

get ftpaccelerator go to top

Get ftp accelerator settings
syntax: get ftpaccelerator xxx
of the FTP server
example: get ftpaccelerator ftp.xyz.com
example: get ftpaccelerator 10.1.1.1

get ftpforward go to top

Get ftp proxy configuration information
syntax: get ftpforward <parameter>
parameters:

Separator	-	Get the Username/Password separator character
Address	-	Is FTP Proxy listening on any address ?
Emailuser	-	Anonymous FTP Email address

See also
     add ftpforward
     clear ftpforward
     remove ftpforward
     set ftpforward

get gateway go to top

Get the list of gateways for the router table
syntax: get gateway

See also
     add gateway
     clear gateway
     remove gateway
     set gateway

get icpclient go to top

Get icp client settings
syntax: get icpclient or get icpclient <parameter>
parameters:

Enable	-	Shows if icp client is enabled
MustUseHierarchy	-	Shows if MustUseHierarchy is set
NeighborTimeout	-	Neighbor Timeout value in seconds

See also
     add icpclient
     clear icpclient
     remove icpclient
     set icpclient

get icpmulticast go to top

Get icp multicast settings
syntax: get icpmulticast <parameter>
parameters:

Enable

show if multicast group is enabled or not

See also
     add icpmulticast
     clear icpmulticast
     remove icpmulticast
     set icpmulticast

get icpmulticastgroup go to top

Get icp multicast group settings
syntax: get icpmulticastgroup <parameter>
parameters:

Address	-	the multicast group address
ProxyPort	-	the proxy port the multicast group is listening on
IcpPort	-	the icp port the multicast group is listening on

get icpneighbor go to top

Get icp neighbor settings
syntax: get icpneighbor xxx or get icpneighbor xxx <parameter>
example: get icpneighbor www.peer.com enable
parameters:

proxyport	-	http proxy port
icpport	-	icp port
type	-	the type of the neighbor, either PARENT, PEER, or CERN
priority	-	only meaningful to PARENT or CERN neighbor, lower numbers accessed first
domain	-	only meaningful to PARENT neighbor, by pass this domain

See also
     add icpneighbor
     clear icpneighbor
     remove icpneighbor
     set icpneighbor

get icpresponder go to top

NOT SUPPORTED - use "get icptrustedlist"

See also
     add icpresponder
     clear icpresponder
     remove icpresponder
     set icpresponder

get icprouting go to top

Get icp routing settings
syntax: get icprouting <parameter>
parameters:

LocalDomain	-	don't go to ICP or Cern hierarchy for these domains
StopList	-	Stop List

See also
     add icprouting
     clear icprouting
     remove icprouting
     set icprouting

get icpserver go to top

Get icp server settings
syntax: get icpserver or get icpserver <parameter>
parameters:

Enable	-	Shows if icp server is enabled
Port	-	Port for icp server connection
EnableSRTT	-	NOT SUPPORTED
EnableACL	-	NOT SUPPORTED, use "get icptrustedlist"
MultiCastGroup	-	NOT SUPPORTED, use "get icpmulticastgroup"
ClientList	-	NOT SUPPORTED, use "get icptrustedlist"

See also
     add icpserver
     clear icpserver
     remove icpserver
     set icpserver

get icptrustedlist go to top

Get icp trusted list settings
syntax: get icptrustedlist <parameter>
parameters:

OnServerRequest	-	show the server's trusted list is enabled or not
OnClientReply	-	show the client's trusted list is enabled or not
Address	-	display all the trusted addresses

get ipaclist go to top

Get the parameters for the IP access control list
syntax1: get ipaclist <parameter>
parameters:

Enable	-	Is IP access control enabled?
syntax2: get ipaclist source defaultaction

where xxx is a source ip, subnet, range or DNS name
that has been added using the ADD command
example: get ipaclist source 10.1.1.1
example: get ipaclist source 10.1.1.1 action
example: get ipaclist source 10.0.0.0 action
example: get ipaclist source 10.1.1.1-10.1.1.254 action
example: get ipaclist source www.foo.com action
example: get ipaclist source defaultaction
parameters:

Type	-	Type of address {IP \| SUBNET \| RANGE \| DNS}
Action	-	Action for the address {BLOCK \| ALLOW}
DefaultAction	-	Default action for sources {BLOCK \| ALLOW}
syntax3: get ipaclist dest defaultaction

where xxx is a destination ip, subnet, range or DNS name
that has been added using the ADD command
example: get ipaclist source 10.1.1.1 action
example: get ipaclist source 10.0.0.0 action
example: get ipaclist source 10.1.1.1-10.1.1.254 action
example: get ipaclist source www.foo.com action
example: get ipaclist source defaultaction
parameters:

Type	-	Type of address {IP \| SUBNET \| RANGE \| DNS}
Action	-	Action for the address {BLOCK \| ALLOW}
DefaultAction	-	Default action for sources {BLOCK \| ALLOW}
syntax3: get ipaclist dest defaultaction

where xxx is a destination ip, subnet, range or DNS name
that has been added using the ADD command
example: get ipaclist dest 10.1.1.1 action
example: get ipaclist dest 10.0.0.0 action
example: get ipaclist dest 10.1.1.1-10.1.1.254 action
example: get ipaclist dest www.bar.com action
example: get ipaclist dest defaultaction
parameters:

Type	-	Type of address {IP \| SUBNET \| RANGE \| DNS}
Action	-	Action for the address {BLOCK \| ALLOW}
PortBegin	-	Beginning port for range access control
PortEnd	-	Ending port for range access control
DefaultAction	-	Default action for sources {BLOCK \| ALLOW}

See also
     add ipaclist
     clear ipaclist
     remove ipaclist
     set ipaclist

get logpush go to top

Get the parameters for LOGPUSH
syntax: get logpush enable - is logpush enabled or disabled
get logpush host - get the host name or IP address of the destination FTP server
get logpush login - get the ftp login id
get logpush password - get the ftp password
get logpush dir - get the destination directory on the ftp server
get logpush onrollover - is onrollover enabled or disabled
get logpush days - get the days that are scheduled
get logpush time - get the time
get logpush timezone - get if time specified is in local or GMT time
get logpush logtype - get which logs were specified to push
get logpush delete - get if the log will be deleted after the push
get logpush result - get the result from the last logpush

See also
     add logpush
     clear logpush
     remove logpush
     set logpush

get miniftpserver go to top

Get mini FTP server configuration information
syntax: get miniftpserver <parameter>
parameters:
address [none] (any) - format: aa.aa.aa.aa where aa is a decimal number

See also
     add miniftpserver
     clear miniftpserver
     remove miniftpserver
     set miniftpserver

get miniwebserver go to top

Get mini Web server configuration information
syntax: get miniwebserver <parameter>
parameters:

ErrorPort	-	Get the mini Web server error port
ErrorPageLanguage	-	Get the error page language
ErrorPageLanguageList	-	Get the list of available error page languages

See also
     add miniwebserver
     clear miniwebserver
     remove miniwebserver
     set miniwebserver

get ntp go to top

Get the NTP enabled status and/or a list of NTP server addresses
syntax: get ntp [enable|server]

See also
     add ntp
     clear ntp
     remove ntp
     set ntp

get pinlist go to top

See also
     add pinlist
     clear pinlist
     remove pinlist
     set pinlist

get purgelist go to top

Get the proxy purging settings
syntax: get purgelist [status | urlmask]
syntax: get purgelist urlmask [<urlmask>]

See also
     add purgelist
     clear purgelist
     remove purgelist
     set purgelist

get qos go to top

Get the quality of service settings
syntax: get qos [mode | requests | replies | errors]

See also
     add qos
     clear qos
     remove qos
     set qos

get serverpersistence go to top

Get the server persistence settings
syntax: get serverpersistence [enable]

get serverpersistence go to top

Get the server persistence settings
syntax: get serverpersistence [enable]

get smc go to top

Show global parameters and values for Streaming Media Caching
syntax: get smc or get smc <parameter>
parameters:

idleTimeout	-	Idle player timeout in seconds
keepAliveTimeout	-	Default keep alive timeout for origin server in seconds
maxBwPerStream	-	Max bandwith per player stream in kbps
maxUpStreamBw	-	Max upstream bandwidth for fills in kbps
maxDownStreamBw	-	Max bandwidth for all players in kbps
maxSessions	-	Max player sessions
maxDiskUsage	-	Max disk usage in Gbytes
maxObjectSize	-	Max object size in Mbytes
maxObjectDuration	-	Max track length in hours

maxLiveObjectDuration- Max live track length in hours

mmsenable	-	Enable microsoft media streaming
qthttptunnelenable	-	Enable Quicktime HTTPTunnel media streaming
continuestreamingfilltime	-	Continue streaming fill time in minutes
maxTTL	-	Maximum TTL for objects in hours
minTTL	-	Minimum TTL for objects in seconds
defaultTTL	-	Default TTL for objects in hours
upstreamProxyEnable	-	Enable hiearchy operation
upstreamProxyAddress	-	IP address of upstream RTSP proxy
upstreamProxyPort	-	Port of upstream RTSP proxy

See also
     add smc
     clear smc
     remove smc
     set smc

get smcservice go to top

Get the list of smc services or values for a specific service
syntax: get smcservice [ <servicename> [parameter] ]
name - Name of the service

type	-	Type of the service
enable	-	Enable this service
address	-	Listener addresses for the service
port	-	Listener port of the service
dnsname	-	Site accelerated by accelerator service
originAddress	-	Fill addresses for accelerator service
originPort	-	Fill port for accelerator service
timeshift	-	Enable timeshifting
extLog	-	Enable extended log
extLogRollOption	-	Roll option
extLogRollSize	-	Roll size in Mbytes
extLogRollPeriod	-	Roll period in hours
extLogRollDay	-	Roll day
extLogRollTime	-	Roll time
extLogRollTimeZone	-	Roll time zone
extLogDeleteOption	-	Delete option
extLogDeleteMaxTime	-	Max time before deletion in hours
extLogDeleteMaxFiles	-	Max log files
extLogServerIP	-	Log server IP address
extLogMethod	-	Log method
extLogUri	-	Log URI
extLogVersion	-	Log RTSP version
extLogStatus	-	Log RTSP status code
extLogCacheStatus	-	Log Cached status

See also
     add smcservice
     clear smcservice
     remove smcservice
     set smcservice

get socks go to top

Get socks configuration information
syntax: get socks <parameter>
parameters:

Enable	-	Is service enabled?
Server	-	Socks server IP address
Port	-	Socks server port number
AuthenticationMethod	-	Authenticate with password or not
ClientUserName	-	Socks client user name
ClientPassword	-	Socks client password

See also
     add socks
     clear socks
     remove socks
     set socks

get stats go to top

Excelerator Stats commands :
stats cluster
stats ftp
stats general
stats icp
stats routes
stats services
stats toptensites
stats webcache
stats wccp
stats smc

See also
     add stats
     clear stats
     remove stats
     set stats

get timezone go to top

Get timezone from the appliance
syntax: get timezone [offset][,name][,dsname]

See also
     add timezone
     clear timezone
     remove timezone
     set timezone

get transparent go to top

Get transparent proxy configuration information
syntax: get transparent or get transparent <parameter>
parameters:
syntax2: get transparent authentication
syntax3: get transparent authentication <parameter>
example: get transparent authentication enable
parameters:

Enable	-	show enabled status
Port	-	show list of ports
Address	-	show list of local IP addresses
ErrorHandling	-	show error handling method
CustomCacheHeaderEnable	-	are custom cache headers enabled
CustomeCacheHeader	-	custom cache header
SSLPort	-	port used for ssl communication
SSLKeyId	-	the name of the certificate to use for ssl communication
AllowConnect	-	are connects allowed
ConnectAllowOnlySSL	-	must connects use SSL
SendXForwardedForHeader	-	are X-Forwarded-For headers enabled
Authentication	-	Authentication settings
Enable	-	Is authentication enabled
Profile	-	List authentication profiles
SSLMaxIdleTime	-	Max idle time for Authentication
PromptOnFailure	-	Prompt for username/password if mutual fails

See also
     add transparent
     clear transparent
     remove transparent
     set transparent

get upgrade go to top

Shows the settings for upgrade
syntax 1: get upgrade
syntax 2: get upgrade xxx
syntax 3: get upgrade xxx <parameter>
example 1: get upgrade
example 2: get upgrade block1
example 3: get upgrade block1 enableinstall
paramters:
EnableInstall
LastInstalledVersion
CurrentRunningVersion
NewInstallVersion
InstallUrl
InstallTime
UpgradeState
VersionDescription
EnableDownload
DownloadTime

See also
     add upgrade
     clear upgrade
     remove upgrade
     set upgrade

get wccp go to top

Get general information about WCCP
syntax: get wccp

See also
     add wccp
     clear wccp
     remove wccp
     set wccp

remove accelerator go to top

Remove http accelerators or values from lists
syntax 1: remove accelerator=<accelerator name>
syntax 2: remove accelerator xxx <parameter>=value
example 2: remove accelerator name1 webserver=www.url.com
parameters:
SYNTAX 1:

Accelerator

remove an accelerator named <accelerator name>

SYNTAX 2:

WebServer	-	Remove an address from named accelerator
Address	-	Remove an IP address from named accelerator
CustomCacheHeader	-	Remove a custom cache header
syntax3: remove accelerator xxx authentication profile=<value>

Profile - Remove Authentication profile from named accelerator

See also
     add accelerator
     clear accelerator
     get accelerator
     set accelerator

remove adminacl go to top

See also
     add adminacl
     clear adminacl
     get adminacl
     set adminacl

remove alert go to top

Remove syslog alert to the appliance
syntax: remove alert [options] = <value>
syslogserver - syslog server

emailserver	-	SMTP email server
emailreceipt	-	email recipient

value = [ip address|hostname]

See also
     add alert
     clear alert
     get alert
     set alert

remove authentication go to top

Command or type or parameter or value conflict

See also
     add authentication
     clear authentication
     get authentication
     set authentication

remove certificate go to top

Delete one certificate of authority
syntax: delete certificate name=<name>

See also
     add certificate
     clear certificate
     get certificate
     set certificate

remove cluster go to top

Remove a server or service from the cluster
syntax: remove cluster server | service=<Name>

server - Name of server to remove from the cluster

service - Name of service to remove from the cluster

See also
     add cluster
     clear cluster
     get cluster
     set cluster

remove comlog go to top

Delete a common cache log on the appliance
syntax: delete comlog <directory>=<filename>

See also
     add comlog
     clear comlog
     get comlog
     set comlog

remove configfile go to top

Delete a configuration file on the appliance
syntax: delete configfiles file=<filename> [floppy]

See also
     add configfile
     clear configfile
     get configfile
     set configfile

remove configfiles go to top

Delete a configuration file on the appliance
syntax: delete configfiles file=<filename> [floppy]

See also
     add configfiles
     clear configfiles
     get configfiles
     set configfiles

remove dhcp go to top

Add a DNS server reference to the appliance
syntax: add dns server=<IPAddress>[,server=<IPAddress> ...]

server - IP address of a DNS server

See also
     add dhcp
     clear dhcp
     get dhcp
     set dhcp

remove dns go to top

Remove a DNS server reference from the appliance
syntax: remove dns server=<IPAddress>[,server=<IPAddress> ...]

server - IP address of a DNS server

See also
     add dns
     clear dns
     get dns
     set dns

remove download go to top

Remove a site from the download list
syntax: remove download=label

See also
     add download
     clear download
     get download
     set download

remove eth0 go to top

Remove the given address from the specified network connection
syntax: remove eth0 address=<IPaddr>[,address=<IPaddr> ...]

address - IP address to be assigned to this connection

See also
     add eth0
     clear eth0
     get eth0
     set eth0

remove extlog go to top

Delete an extended cache log on the appliance
syntax: delete extlog <directory>=<filename>

See also
     add extlog
     clear extlog
     get extlog
     set extlog

remove filter go to top

Delete a URL blocking filter service or override URL mask
syntax 1: delete filter service=<sname>

sname - name used to identify the service

syntax 2: delete filter override=<urlmask>

urlmask - URL mask to use for auto allow/block override

syntax 3: delete filter bypass=<IP Address:port>

See also
     add filter
     clear filter
     get filter
     set filter

remove forward go to top

Remove an address or authentication profile from the forward proxy service
syntax1: remove forward <parameter> = <value>
parameters: [default value] (possible values)
address [none] (any) - format: aa.aa.aa.aa/mm.mm.mm.mm where aa is the address and mm is the netmask
CustomCacheHeader [none] (any) - remove a custom cache header
syntax2: remove forward authentication profile=<value>
Profile - Remove Authentication profile

See also
     add forward
     clear forward
     get forward
     set forward

remove ftpaccelerator go to top

Remove ftp accelerators or values from lists
syntax: remove ftpaccelerator=<xxx>
of the FTP server
example: remove ftpaccelerator=ftp.xyz.com
example: remove ftpaccelerator=10.1.1.1

See also
     add ftpaccelerator
     clear ftpaccelerator
     get ftpaccelerator
     set ftpaccelerator

remove ftpforward go to top

Remove an address from the FTP proxy service
syntax: remove ftpforward <parameter> = <value>
parameters: [default value] (possible values)
address [none] (any) - format: aa.aa.aa.aa
where aa is a decimal number.

See also
     add ftpforward
     clear ftpforward
     get ftpforward
     set ftpforward

remove gateway go to top

Remove a gateway from the list of gateways
syntax: remove gateway address = <IPAddr> | defaultroute

address - address of host or subnet to remove from list

See also
     add gateway
     clear gateway
     get gateway
     set gateway

remove icpneighbor go to top

Remove can be used to remove icp neighbor hostnames and domains
For ICP neighbor hostname use:
syntax: remove icpneighbor=<hostname>
For ICP neighbor hostname domains use:
syntax: remove icpneighbor <hostname> domain=<domain>

See also
     add icpneighbor
     clear icpneighbor
     get icpneighbor
     set icpneighbor

remove icpresponder go to top

NOT SUPPORTED - use "remove icptrustedlist address"

See also
     add icpresponder
     clear icpresponder
     get icpresponder
     set icpresponder

remove icprouting go to top

Remove a host name or address from Local Domain or Stop list
syntax: remove icprouting <parameter> = value
parameters: [default value] (possible values)
LocalDomain [none] (host name or ip address)
StopList [none] (host name or ip address)

See also
     add icprouting
     clear icprouting
     get icprouting
     set icprouting

remove icpserver go to top

Remove icp server settings from a list
syntax: remove icpserver <parameter> = <value>
parameters:

MultiCastGroup	-	NOT SUPPORTED, use "clear icpmulticastgroup"
ClientList	-	NOT SUPPORTED, use "remove icptrustedlist"

See also
     add icpserver
     clear icpserver
     get icpserver
     set icpserver

remove icptrustedlist go to top

Remove a trusted address from the trusted list
syntax: remove icptrustedlist <parameter> = value
parameters: [default value] (possible values)

Address

[none] (host name or ip address)

See also
     add icptrustedlist
     clear icptrustedlist
     get icptrustedlist
     set icptrustedlist

remove ipaclist go to top

Remove items from list for the IP access control list
syntax1: remove ipaclist source=<ip, subnet, range, or DNS>
example: remove ipaclist source=10.0.0.0
example: remove ipaclist source=10.1.1.1-10.1.1.90
example: remove ipaclist source=www.foo.com
syntax2: remove ipaclist dest=<ip, subnet, range, or DNS>
example: remove ipaclist dest=10.0.0.0
example: remove ipaclist dest=10.1.1.1-10.1.1.90
example: remove ipaclist dest=www.foo.com

See also
     add ipaclist
     clear ipaclist
     get ipaclist
     set ipaclist

remove logpush go to top

Success (use the APPLY command to enforce changes)

See also
     add logpush
     clear logpush
     get logpush
     set logpush

remove miniftpserver go to top

Remove an address from the mini FTP server
syntax: remove miniftpserver <parameter> = <value>
parameters: [default value] (possible values)
address [none] (any) - format: aa.aa.aa.aa
where aa is a decimal number.

See also
     add miniftpserver
     clear miniftpserver
     get miniftpserver
     set miniftpserver

remove miniwebserver go to top

No help for that command.

See also
     add miniwebserver
     clear miniwebserver
     get miniwebserver
     set miniwebserver

remove ntp go to top

Delete one NTP server address from the list
syntax: delete ntp server=<IPAddress>

See also
     add ntp
     clear ntp
     get ntp
     set ntp

remove pinlist go to top

Delete one proxy pinlist entry from the current list
syntax: delete pinlist urlmask=<urlmask>
syntax: delete pinlist dbperrorcode=<code>

See also
     add pinlist
     clear pinlist
     get pinlist
     set pinlist

remove purgelist go to top

Delete a proxy purgelist entry from the current list
syntax: delete purgelist urlmask=<urlmask>

See also
     add purgelist
     clear purgelist
     get purgelist
     set purgelist

remove smc go to top

Remove values from SMC parameter lists
syntax: remove smc upstreamProxyAddress=<ipaddress>
Try "set smc ?" for other parameters

See also
     add smc
     clear smc
     get smc
     set smc

remove smcservice go to top

Remove values from SMC parameter lists
syntax: remove smcservice=<service name>
syntax: remove smcservice <name> address=<listening ipaddress>
syntax: remove smcservice <name> originAddress=<origin ipaddress>
example: remove smcservice strmsvc address=10.1.1.1
example: remove smcservice strmsvc originaddress=100.1.1.1

See also
     add smcservice
     clear smcservice
     get smcservice
     set smcservice

remove socks go to top

Remove an address from the socks client bypass list
syntax: remove socks <parameter> = <value>
parameters: [default value] (possible values)
ByPassList [none] (any) - add local IP address

See also
     add socks
     clear socks
     get socks
     set socks

remove transparent go to top

Remove transparent proxy value from list
syntax1: remove transparent <parameter> = <value>
parameters: (possible values)

Port (1

65535) - remove port from list

Address (any) - remove local IP address from list
CustomCacheHeader [none] (any)
- remove a custom cache header
syntax2: remove transparent authentication profile=<value>
Profile - Remove Authentication profile

See also
     add transparent
     clear transparent
     get transparent
     set transparent

remove wccp go to top

Remove syslog alert to the appliance
syntax: remove alert [options] = <value>
syslogserver - syslog server

emailserver	-	SMTP email server
emailreceipt	-	email recipient

value = [ip address|hostname]

See also
     add wccp
     clear wccp
     get wccp
     set wccp

set accelerator go to top

Set http accelerator value
syntax1: set accelerator xxx <parameter=value>
parameters: [default value] (possible values)
Name [none] (any 8 character alpha numeric name)
Enable [Yes] (Yes, No)
Port [80] (1-65535)
DnsName [none] (Valid DNS Name)
WebServerPort [80] (1-65535)
SendXForwardedForHeader [No] (Yes, No)
FillHostHeaderType [ForwardReceivedHost] (ForwardReceivedHost, AlternateHost)
AltHostName [Any]
HostMismatchError [No] (Yes, No)
CustomCacheHeaderEnable [No] (Yes, No)
CustomeCacheHeader [Any]
SSLPort [443] (1-65535)
SSLKeyId [Any]
TunnelTraffic [No] (Yes, No)
TunnelOnlySSL [No] (Yes, No)
ComLog [No] (Yes, No)
ComLogRollOption [BySize] (ByTime, BySize)
ComLogRollSize [10] (size in megabytes (1-100) )
ComLogRollPeriod [24] (number of hours)
ComLogRollDay [Monday] (1stOfMonth,Monday,Tuesday,...,Sunday)
ComLogRollTime [12AM] (12AM,1AM,...,11PM)
ComLogRollTimeZone [Local] (Local, GMT)
ComLogDeleteOption [ByFiles] (NoDelete, ByTime, ByFiles)
ComLogDeleteMaxTime [168] (number in hours)
ComLogDeleteMaxFiles [7] (number of files)
ExtLog [No] (Yes, No)
ExtLogRollOption [BySize] (ByTime, BySize)
ExtLogRollSize [10] (size in megabytes (1-100) )
ExtLogRollPeriod [24] (number of hours)
ExtLogRollDay [Monday] (1stOfMonth,Monday,Tuesday,...,Sunday)
ExtLogRollTime [12AM] (12AM,1AM,...,11PM)
ExtLogRollTimeZone [Local] (Local, GMT)
ExtLogDeleteOption [ByFiles] (NoDelete, ByTime, ByFiles)
ExtLogDeleteMaxTime [168] (number in hours)
ExtLogDeleteMaxFiles [7] (number of files)
ExtLogUserName [No] (Yes, No)
ExtLogServerIP [No] (Yes, No)
ExtLogSiteName [No] (Yes, No)
ExtLogMethod [No] (Yes, No)
ExtLogUri [No] (Yes, No)
ExtLogUriStem [No] (Yes, No)
ExtLogUriQuery [No] (Yes, No)
ExtLogHttpVersion [No] (Yes, No)
ExtLogHttpStatus [No] (Yes, No)
ExtLogBytesSent [No] (Yes, No)
ExtLogBytesReceived [No] (Yes, No)
ExtLogTimeTaken [No] (Yes, No)
ExtLogUserAgent [No] (Yes, No)
ExtLogCookie [No] (Yes, No)
ExtLogReferer [No] (Yes, No)
ExtLogCachedStatus [No] (Yes, No)
ExtLogFillProxyIP [No] (Yes, No)
ExtLogOriginIP [No] (Yes, No)
syntax2: set accelerator xxx authentication <parameter=value>
parameters: [default value] (possible values)
Enable [No] (Yes, No)
Profile [none] (Valid profile name)
SSLMaxIdleTime [30] (time in minutes)
PromptOnFailure [No] (Yes, No)
SendXForwardedForHeader [No] (Yes, No)
FillHostHeaderType [ForwardReceivedHost] (ForwardReceivedHost, AlternateHost)
AltHostName [none] (Alternate host name)
HostMismatchError [Yes] (Yes, No)
syntax3: set accelerator xxx securex <parameter=value>
parameters: [default value] (possible values)
Enable [No] (Yes, No)
Port [443] (1-65535)
KeyId [AUTO] (Valid key name)
SecureToWeb [No] (Yes, No)
TrustedRoots [none] (Valid trusted roots)
InteractiveHandshake [No] (Yes, No)
AcceptAnyRoot [No] (Yes, No)
AllowCacheAtBrowser [No] (Yes, No)
syntax4: set accelerator xxx pathrule <parameter=value>
parameters: [default value] (possible values)
Enable [No] (Yes, No)
MultiHomeMaster [none] (valid master accelerator name)
SubPath [none] (Valid subpath)
Type [StartsWith] (StartsWith, EndsWith)
Strip [No] (Yes, No)

See also
     add accelerator
     clear accelerator
     get accelerator
     remove accelerator

set adminacl go to top

Set Administration ACL parameters
syntax: set AdminAcl ClientListEnable=(Yes, No)
in ClientAddress list are allowed to administer Excelerator.

See also
     add adminacl
     clear adminacl
     get adminacl
     remove adminacl

set alert go to top

List settings about the specified SYSLOG alert configuration attribute
syntax: set alert [parameter] = <value>
syslog - syslog server name

syslogport	-	syslog port number
syntax: set alert [parameter] = <yes\|no>

syslog - enable syslog

email	-	enable email
diskspaceshortage	-	disk space shortage alert
ecbshortage	-	ecb shortage alert
pingflooding	-	ping flooding alert
synflooding	-	synflooding alert
udpflooding	-	udpflooding alert
icpparentdown	-	icp parent flooding alert
socksserverdown	-	sock server down alert
systemup	-	system up alert
systemdown	-	system down alert
loginfailure	-	login failure alert
configchange	-	configuration change alert

See also
     add alert
     clear alert
     get alert
     remove alert

set authentication go to top

syntax: set authentication xxx <parameter>=<value>
example: set authentication name1 enable=yes|no
parameters:

Type	-	Prompted authentication type (LDAP \| RADIUS \| NONE)
syntax: set authentication xxx mutual <parameter>=<value>

example: set authentication name1 mutual trustedrootfile=tr.der
parameters:

TrustedRootFile	-	Clears trusted roots and sets the value provided
syntax: set authentication xxx ldap <parameter>=<value>

example: set authentication name1 ldap enablesecure=yes|no
parameters:

Address	-	Sets the LDAP server ip address
Port	-	Sets the LDAP server port
EnableSecure	-	Enables secure transmission to LDAP server
ClientCertFile	-	Sets certificate used with LDAP server
LoginType	-	Indicates the login type (DN \| EMAIL \| FIELDNAME \| NONE)
SearchBase	-	Sets the root for user searches (used with EMAIL \| FIELDNAME)
bindanonymous	-	(yes \| no) binds anonymous to ldap server if yes

used with LoginType=(EMAIL | FIELDNAME)

bindusername

Binds as this user to ldap server

used with LoginType=(EMAIL | FIELDNAME)

bindpassword

Password for user bind to ldap server

used with LoginType=(EMAIL | FIELDNAME)

fieldname

Defines the field used for ldap search

used with LoginType=FIELDNAME
syntax: set authentication xxx radius <parameter>=<value>
example: set authentication name1 radius secret=abc123
parameters:

Address	-	Sets the RADIUS server ip address
Port	-	Sets the RADIUS server port
Secret	-	Indicates the secret shared with the RADIUS server
ReplyTime	-	Sets the amount of time to wait for a reply in seconds
ResendTime	-	Sets the amount of time between resends in seconds

set cache go to top

Set value for specified cache parameter
syntax: set cache <parameter> = value
parameters: [default value] (possible values)
IgnoreRefresh [No] (Yes, No)
FilterCookies [No] (Yes, No)
ToOriginServers [Yes] (Yes, No)
ToBrowsers [Yes] (Yes, No)
ReadAhead [No] (Yes, No)
MaxReadAheadRequest [100] (1 - 1000)
Private [No] (Yes, No)
ContinueAcceleratorFillTime [1] (minutes)
ContinueForwardFillTime [1] (minutes)
HttpRetries [4] (retries)
HttpMaxTime [360] (minutes)
HttpMinTime [0] (minutes)
HttpDefaultTime [120] (minutes)
FtpRevalidateTime [360] (minutes)
GopherRevalidateTime [360] (minutes)
DnsNegativeLookup [120] (seconds)
DnsMaxEntryTTL [168] (hours)
DnsMinEntryTTL [120] (seconds)
DnsMaxEntryThreshold [2500](2000 - 100000)
DnsTransport [UDP] (UDP,TCP)
TcpConnectionTimeout [30] (seconds)
TcpKeepaliveInterval [5] (minutes)
TcpDataReadTimeout [120] (seconds)
TcpIdleServerTimeout [30] (minutes)
TcpIdleClientTimeout [600] (seconds)
ObjNoCacheForQuestionMark [Yes] (Yes, No)
ObjNoCacheForCgi [Yes] (Yes, No)

See also
     add cache
     clear cache
     get cache
     remove cache

set certificate go to top

Set certificate of authority values
syntax: set certificate name <name> [subject=<subjname>]
[,authority=<internal|external|verisign>]
[,organization=<organizational unit>] [,locality=<city/town>]
[,state=<state/province>] [,country=<country>]
[,validmonths=<num>]
[,password=<backup password>] [,target=<disk|floppy>]
[,action=<request|create|backup|restore|none>]

See also
     add certificate
     clear certificate
     get certificate
     remove certificate

set cluster go to top

Set information about the cluster
syntax: set cluster <parameter>=<value>
Name [none] (any)
Interval [5] (1-65535) in Seconds
Heartbeat [18] (1-65535) in ticks
Alert [6] (1-65535) in ticks
JoinTimeout [90] (1-65535) in ticks
SuspectedFailure [45] (1-65535) in ticks
ConfirmedFailure [90] (1-65535) in ticks
Subnet [none] (any bound subnet)
Mask [none] (any bound mask)
Enable [no] (yes|no)
Server [none] (any)
Service [none] (any)
Note: A tick is equal to 55ms or approximately 20 ticks per second.

See also
     add cluster
     clear cluster
     get cluster
     remove cluster

set configfile go to top

Put (immediately) configuration file from floppy to Excelerator web area
syntax: set configfile floppydownload=<filename>
(note: this copies the file from the floppy so it can be downloaded)

See also
     add configfile
     clear configfile
     get configfile
     remove configfile

set date go to top

Set date and time on the appliance
syntax: set date [year=<yyyy>][,month=<mm>][,day=<dd>][,time=<hh:mm:ss>]
Note: this command will disable NTP if it is currently enabled

See also
     add date
     clear date
     get date
     remove date

set dns go to top

Set the DNS domain, alternate name or the DNS server for name resolution
syntax (domain): set dns domain=<domain name>

domain - context for this appliance when resolving DNS names

syntax (alias) : set dns alias=<name>

alias - alternate name for this server

syntax (server): set dns server=<IPAddress>

server - IP address of a DNS server

syntax (enablemonitor): set dns enablemonitor=yes|no

enablemonitor - allow periodic ping of dns servers

See also
     add dns
     clear dns
     get dns
     remove dns

set dnsproxy go to top

Enable/Disable dns proxy on all addresses
syntax: set dnsproxy enable = yes | no

See also
     add dnsproxy
     clear dnsproxy
     get dnsproxy
     remove dnsproxy

set download go to top

Set a value for specified download parameter
syntax: set download label <parameter> = value
information or a block number called block1, block2,...,block9999
parameters: [default value] (possible values)
Url [none] (any)
Enable [Yes] (Yes, No)
Level [1] (1-1000)
Link [No] (Yes, No)
MaxRequest [6] (1-50)
MaxObject [5000] (1-100,000)
MaxData [200] (megabytes)
Frequency [OneTimeOnly] (OneTimeOnly, OnceADay, Daily, Immediately)
OneTimeOnlyDay [1] (1-31)
OneTimeOnlyMonth [January] (January,...,December)
OneTimeOnlyYear [1999] (any year)
OneTimeOnlyTime [12AM] (12AM,1AM,...,11PM)
OneTimeOnlyZone [Local] (Local, GMT)
OnceADayTime [12AM] (12AM,1AM,...,11PM)
OnceADayZone [Local] (Local, GMT)
DailyStartTime [9AM] (12AM,1AM,...,11PM)
DailyEndTime [5AM] (12AM,1AM,...,11PM)
DailyZone [Local] (Local, GMT)
DailyFrequency [1] (hours)
EnableSelectDays [No] (Yes, No)
SelectedDays [Monday+Tuesday+Wednesday+Thursday+Friday]
(Monday,Tuesday,Wednesday,Thursday,Friday,Saturday,Sunday)
ClientUsername [none] (any)
ClientPassword [none] (any)

See also
     add download
     clear download
     get download
     remove download

set downloadSequentially go to top

Specify if downloads are loaded sequentially or not
syntax: set downloadSequentially enable = value
default value: No
possible values: Yes, No

set dsend go to top

Set daylight saving end time on the appliance
syntax: set dsend month=<mm>, day=<d>, hour=<hh>,
(month 10=October, day 1=Sunday, which=occurrence in month, 24 hour time)
examples: End the last Sunday in October
set dsend month=10, day=1, which=last, hour=2
End on October 31
set dsend month=10, which=eq31, hour=2
End on the last Sunday in October on or before the 15th
set dsend month=10, day=1, which=le15, hour=2

See also
     add dsend
     clear dsend
     get dsend
     remove dsend

set dsstart go to top

Set daylight saving start time on the appliance
syntax: set dsstart month=<mm>, day=<d>, hour=<hh>,
(month 4=April, day 1=Sunday, which=occurrence in month, 24 hour time)
examples: Begin the first Sunday in April
set dsstart month=4, day=1, which=first, hour=2
Begin on April 1
set dsstart month=4, which=eq1, hour=2
Begin on the first Sunday in April on or after the 8th
set dsstart month=4, day=1, which=ge8, hour=2

See also
     add dsstart
     clear dsstart
     get dsstart
     remove dsstart

set dstime go to top

Set daylight saving time on the appliance (on/off)
syntax: set dstime=on|off

See also
     add dstime
     clear dstime
     get dstime
     remove dstime

set eth0 go to top

Set the given address to be the ONLY address on the given connection
syntax 1: set eth0 address=<IPaddr>,mask=<mask>[,address=<IPaddr> ...]
syntax 2: set eth0 address=<IPaddr>/<mask>
syntax 3: set eth0 address=<IPaddr>/<8-30> -- CIDR format
Syntax2 example: set xxx address = 10.1.1.1/255.255.255.0
Syntax3 example: set xxx address = 10.1.1.1/24

address	-	IP address to be assigned to this connection
mask	-	subnet mask for an address assigned to this connection
nat	-	nat status for an address assigned to this connection

See also
     add eth0
     clear eth0
     get eth0
     remove eth0

set filter go to top

Set the parameters for a URL blocking filter service or override URL mask
syntax 1a: set filter service <sn> [sopts] category <cn> [copts]
[,config=<url>][,download=<frequency>][,downloadyear=<year>]
[,downloadmonth=<month>][,downloadday=<day>][,downloadtime=<time>]
copts: [autoallow=<aflag>][,blockunrated=<bflag>]
[,threshold=<limit>][,action=<action>][,rule=<rule>]
syntax 1b: set filter service nwp [sopts] category <cn> [copts]
[,flashforward=<fcount>][,flashback=<bcount>]

sn	-	name used to identify the service
cn	-	name used to identify the category within a service
eflag	-	enable (yes) or disable (no) the service
aname	-	account name for the service
apassword	-	account password for the service
url	-	fully qualified URL of the configuration file to download
frequency	-	download frequency (D=daily\|W=weekly\|B=biweekly\|M=monthly)
year	-	year for next download (1999-2999)
month	-	month for next download (1-12)
day	-	day for next download (1-31)
time	-	time for next download (0:00-23:59)
aflag	-	automatically allow category if within threshold (yes\|no)
bflag	-	block unrated content (yes\|no)
limit	-	threshold limit value (from list of limits)
action	-	action to take if category not OK (block\|monitor)
rule	-	shortcut to set all copts (ignore\|alwaysallow\|monitor\|block)
cflag	-	block URL's from specific countries (yes\|no)
hflag	-	post word hits to log file if logging is on (yes\|no)
fcount	-	flash (look) forward value (0=none, >1=# of levels)
bcount	-	flash (look) backward value (0=none, >1=# of levels)
syntax 2: set filter override <urlmask> [alwaysallow=<aflag>]
urlmask	-	URL mask to use for auto allow/block override
aflag	-	use URL mask to auto allow (yes) or auto block (no)
syntax 3: set filter [logopts]

[,comlogrollsize=<file in MB (1-100)>][,comlogdeletemaxtime=<hours>]
[,comlogdeletemaxfiles=<number>][,comlogrollperiod=<hours>]
[,comlogrolltime=<hour>][,comlogrollday=<day>]
[,comlogrolltimezone=local|gmt]
[,comlogdeleteoption=nodelete|bytime|byfiles]

See also
     add filter
     clear filter
     get filter
     remove filter

set floppy go to top

Set the use of the floppy drive
syntax: set floppy saveonapply=yes|no, poll=yes|no, interval=<seconds>

saveonapply - write a copy of the settings to the floppy on apply

poll - appliance will check the floppy for an inserted disk

interval - number of seconds between checks for a floppy

See also
     add floppy
     clear floppy
     get floppy
     remove floppy

set forward go to top

syntax1: set forward <parameter> = <value> [default] (possible values)
parameters: [default value] (possible values)
Enable [No] (Yes, No) - enable or disable HTTP Proxy service
Port [8080] (1 - 65535) - set HTTP Proxy port
Address [none] (any) - format: aa.aa.aa.aa/mm.mm.mm.mm where aa is the address and mm is the netmask
WpadEnable [No] (Yes, No)- enable or disable web proxy auto-discovery
CustomCacheHeaderEnable [No] (Yes, No) - enable or disable custom cache headers
CustomeCacheHeader (any) - sets a custom cache header
SSLPort [443] (1-65534) - sets the port used for ssl communication
SSLKeyId (any) - sets the name of the certificate for use for ssl communication
AllowConnect [Yes] (Yes, No) - enable or disable whether connects are allowed
ConnectAllowOnlySSL [Yes] (Yes, No) - enable or disable whether connects must use SSL
SendXForwardedForHeader [No] (Yes, No) - enable or disable X-Forwarded-For headers
ComLog [No] (Yes, No) - enable or disable common logging of HTTP packets
ComLogRollOption [BySize] (ByTime, BySize) - start new common log based on time or size 'Size in Megabytes'
ComLogRollPeriod [24] (Time in hours) - start new common log file after 'Time in hours'passes
ComLogRollDay [Monday] (Monday, Tuesday,...,Sunday) - start new common log file on given day
ComLogRollTime [12AM] (12AM, 1AM, 2AM,...11PM) - start new common log at given time
ComLogRollTimeZone [Local] (Local, GMT) - Use local or GMT time for common log
ComLogDeleteOption [ByFiles] (NoDelete, ByTime, ByFiles) - delete common log files age or number of files
ComLogDeleteMaxTime [168] (time in hours) - delete common log files after 'time in hours'
ComLogDeleteMaxFiles [7] (number of files) - delete oldest common log files after keeping 'number of files'
ExtLog [No] (Yes, No) - enable or disable extended logging of HTTP packets
ExtLogRollOption [BySize] (ByTime, BySize) - start new extended log based on time or size
ExtLogRollSize [10] (Size in Megabytes (1-100) ) - start new extended log file when old file exceeds
ExtLogRollPeriod [24] (Time in hours) - start new extended log file after 'Time in hours' passes
ExtLogRollDay [Monday] (Monday, Tuesday,...,Sunday) - start new extended log file on given day
ExtLogRollTime [12AM] (12AM, 1AM, 2AM,...11PM) - start new extended log at given time
ExtLogRollTimeZone [Local] (Local, GMT) - Use local or GMT time for extended log
ExtLogDeleteOption [ByFiles] (NoDelete, ByTime, ByFiles) - delete extended log files age or number of files
ExtLogDeleteMaxTime [168] (time in hours) - delete extended log files after 'time in hours'
ExtLogDeleteMaxFiles [7] (number of files) - delete oldest extended log files after keeping 'number of files'
ExtLogUserName [no] (Yes, No) - enable UserName extended log field
ExtLogServerIP [no] (Yes, No) - enable ServerIP extended log field
ExtLogSiteName [no] (Yes, No) - enable SiteName extended log field
ExtLogMethod [no] (Yes, No) - enable Method extended log field
ExtLogUri [no] (Yes, No) - enable Uri extended log field
ExtLogUriStem [no] (Yes, No) - enable UriStem extended log field
ExtLogUriQuery [no] (Yes, No) - enable UriQuery extended log field
ExtLogHttpVersion [no] (Yes, No) - enable HttpVersion extended log field
ExtLogHttpStatus [no] (Yes, No) - enable HttpStatus extended log field
ExtLogBytesSent [no] (Yes, No) - enable BytesSent extended log field
ExtLogBytesReceived [no] (Yes, No) - enable BytesReceived extended log field
ExtLogTimeTaken [no] (Yes, No) - enable TimeTaken extended log field
ExtLogUserAgent [no] (Yes, No) - enable UserAgent extended log field
ExtLogCookie [no] (Yes, No) - enable Cookie extended log field
ExtLogReferer [no] (Yes, No) - enable Referer extended log field
ExtLogCachedStatus [no] (Yes, No) - enable CachedStatus extended log field
ExtLogFillProxyIP [no] (Yes, No) - enable FillProxyIP extended log field
ExtLogOriginIP [no] (Yes, No) - enable OriginIP extended log field
syntax2: set forward authentication <parameter=value>
parameters: [default value] (possible values)
Enable [Yes] (Yes, No)
Profile [none] (Valid profile name)
SSLMaxIdleTime [30] (time in minutes)
PromptOnFailure [No] (Yes, No)

See also
     add forward
     clear forward
     get forward
     remove forward

set ftpforward go to top

Set ftp proxy configuration parameters
syntax: set ftpforward <parameter> = <value>
example: set ftpforward address=10.1.1.1
parameters: [default value] (possible values)
Separator [$] (character)
Emailuser [none] (string)
address [none] (any) - format: aa.aa.aa.aa
where aa is a decimal number.

See also
     add ftpforward
     clear ftpforward
     get ftpforward
     remove ftpforward

set gateway go to top

Set the gateway for the router table
The syntax is of three types - default, host and network
default: set gateway nexthop=<IPAddr>
host : set gateway nexthop=<IPAddr>,address=<Host IPAddr>
network: set gateway nexthop=<IPAddr>,address=<Subnet Addr>,mask=<Mask>
(optional additional parameters: [metric=<distance>][,active=yes|no])
Other settings include the following syntax:
router : set gateway router=yes|no
rip : set gateway rip=yes|no
enablemonitor : set enablemonitor=yes|no

See also
     add gateway
     clear gateway
     get gateway
     remove gateway

set icpclient go to top

Set icp client settings
syntax: set icpclient <parameter> = <value>
parameters: [default value] (possible values)
Enable [no] (yes, no)
MustUseHierarchy [no] (yes, no)
NeighborTimeOut [2] (0, 3600)

See also
     add icpclient
     clear icpclient
     get icpclient
     remove icpclient

set icpmulticast go to top

Set icp multicast settings
syntax: set icpmulticast <parameter> = <value>
parameters: [default value] (possible values)

Enable

[No] (Yes/No)

See also
     add icpmulticast
     clear icpmulticast
     get icpmulticast
     remove icpmulticast

set icpmulticastgroup go to top

Set icp multicastgroup settings
syntax: set icpmulticastgroup <parameter> = <value>
parameters: [default value] (possible values)

Address	-	[xxx] (any valid multicast group address)
ProxyPort	-	[8080] (1-65535)
IcpPort	-	[3130] (1-65535)

set icpneighbor go to top

Set icp peer, icp parent or cern parent settings
syntax: set icpneighbor xxx <parameter> = <value>
example: add icpneighbor=www.peer.com - first create a hostname
set icpneighbor www.peer.com type=peer
There are 3 peer types, ICP Peer, ICP Parent, and Cern Parent
To setup an ICP peer complete the following steps:
add icpneighbor=www.peer.com - where www.peer.com is the peer hostname
set icpneighbor www.peer.com type=peer - this is an icp peer
set icpneighbor www.peer.com proxyport=8080 - proxy port
set icpneighbor www.peer.com icpport=3130 - icp port
To setup an ICP parent complete the following steps:
set icpneighbor=www.par.com - where www.par.com is the parent hostname
set icpneighbor www.par.com type=parent - this is an icp parent
set icpneighbor www.par.com proxyport=8080 - http proxy port
set icpneighbor www.par.com icpport=3130 - icp port
set icpneighbor www.par.com priority=1 - lower numbers accessed first
add icpneighbor www.par.com domain=www.company.com - bypass this domain
To setup an CERN parent complete the following steps:
set icpneighbor=www.cern.com - where www.cern.com is the cern parent
set icpneighbor www.cern.com type=cern - this is a cern parent
set icpneighbor www.cern.com proxyport=8080 - this is the http proxy port
set icpneighbor www.cern.com priority=1 - lower numbers accessed first
add icpneighbor www.cern.com domain=www.company.com - bypass this domain
To change a hostname use:
set icpneighbor www.cern.com name=www.newhost.com

See also
     add icpneighbor
     clear icpneighbor
     get icpneighbor
     remove icpneighbor

set icpresponder go to top

NOT SUPPORTED - use "set icptrustedlist"

See also
     add icpresponder
     clear icpresponder
     get icpresponder
     remove icpresponder

set icprouting go to top

Set not supported for icprouting. Use add instead.

See also
     add icprouting
     clear icprouting
     get icprouting
     remove icprouting

set icpserver go to top

Set icp server settings
syntax: set icpserver <parameter> = <value>
parameters: [default value] (possible values)
Enable [no] (yes, no)
Port [3130] (1-65535)
EnableSRTT NOT SUPPORTED
EnableACL NOT SUPPORTED, use "set icptrustedlist"
MultiCastGroup NOT SUPPORTED, use "set icpmulticastgroup"
ClientList NOT SUPPORTED, use "add icptrustedlist"

See also
     add icpserver
     clear icpserver
     get icpserver
     remove icpserver

set icptrustedlist go to top

Set icp trustedlist settings
syntax: set icptrustedlist <parameter> = <value>
parameters: [default value] (possible values)

OnServerRequest	-	[No] (Yes/No)
OnClientReply	-	[No] (Yes/No)

set ipaclist go to top

Set the parameters for the IP access control list
syntax1: set ipaclist <parameter>=<value>
parameters:

Enable	-	Is IP access control enabled?
syntax2: set ipaclist source defaultaction=<value> or

where xxx is a source ip, subnet, range or DNS name
that has been added using the ADD command
example: set ipaclist source 10.1.1.1 action=block
example: set ipaclist source 10.0.0.0 action=block
example: set ipaclist source 10.1.1.1-10.1.1.254 action=block
example: set ipaclist source www.foo.com action=block
example: set ipaclist source defaultaction=block
parameters:

Type	-	Type of address {IP \| SUBNET \| RANGE \| DNS}
Action	-	Action for the address {BLOCK \| ALLOW}
DefaultAction	-	Default action for sources {BLOCK \| ALLOW}
syntax3: set ipaclist dest defaultaction=<value> or

where xxx is a destination ip, subnet, range or DNS name
that has been added using the ADD command
example: set ipaclist dest 10.1.1.1 action=block
example: set ipaclist dest 10.0.0.0 action=block
example: set ipaclist dest 10.1.1.1-10.1.1.254 action=block
example: set ipaclist dest www.bar.com action=block
example: set ipaclist dest defaultaction=block
parameters:

Type	-	Type of address {IP \| SUBNET \| RANGE \| DNS}
Action	-	Action for the address {BLOCK \| ALLOW}
PortBegin	-	Beginning port for range access control
PortEnd	-	Ending port for range access control
DefaultAction	-	Default action for sources {BLOCK \| ALLOW}

See also
     add ipaclist
     clear ipaclist
     get ipaclist
     remove ipaclist

set logpush go to top

Set the parameters for LOGPUSH
syntax: set logpush enable=yes|no - enable or disable logpush
set logpush host=<ftp host/IP address> - set the host name or IP address of the destination FTP server
set logpush login=<ftp login name> - set the ftp login id
set logpush password=<ftp password> - set the ftp password
set logpush dir=<ftp destination dir> - set the destination directory on the ftp server
set logpush onrollover=yes|no - enable or disable logpush onrollover
set logpush days={Sunday Monday Tuesday ... Saturday} |{1stOfMonth}| {all} - set the days that are scheduled
set logpush time={12AM, 1AM, 2AM, ..., 11PM} - set the time
set logpush timezone={local, GMT} - specify if the time is in local or GMT time
set logpush logtypes={accelerator cluster filter forward} | {all} - specify which logs to push
set logpush delete=yes|no - specify if the log will be deleted after the push

See also
     add logpush
     clear logpush
     get logpush
     remove logpush

set miniftpserver go to top

Set mini FTP server configuration parameters
syntax: set miniftpserver <parameter> = <value>
parameters: [default value] (possible values)
address [none] (any) - format: aa.aa.aa.aa
where aa is a decimal number

See also
     add miniftpserver
     clear miniftpserver
     get miniftpserver
     remove miniftpserver

set miniwebserver go to top

Set mini Web server configuration parameters
syntax: set miniwebserver <parameter> = <value>
parameters: [default value] (possible values)
ErrorPort [1959] (1-65535)

ErrorPageLanguage

Set the error page language

See also
     add miniwebserver
     clear miniwebserver
     get miniwebserver
     remove miniwebserver

set ntp go to top

Set NTP on/off and specify NTP server addresses
syntax: set ntp enable=yes|no [,server=<IPAddress>]

See also
     add ntp
     clear ntp
     get ntp
     remove ntp

set password go to top

Set the appliance and telnet password on the appliance
syntax: set password=<new> [,oldpassword=<old>] [,user=<config|view>][,exitok=y]

See also
     add password
     clear password
     get password
     remove password

set pinlist go to top

Set proxy pinning options
syntax: set pinlist [enable=<yes|no>] [,time=<hh:mm>]
syntax: set pinlist urlmask <urlmask> [type=<normal|cache|memory|bypass>]
[,urlfrequency=<default|immediate|sunday...saturday|daily|timed>]
note: if the frequency is timed, the time represents an interval
syntax: set pinlist <dbp parm>=<value>
dbpenable [Yes] (Yes, No)
dbpduration [0:20] how long dyamic bypass is effective per URL
dbpcomlog [No] (Yes, No)
dbpcomlogrolloption [BySize] (ByTime, BySize)
dbpcomlogrollsize [10] (size in megabytes (1-100) )
dbpcomlogrollperiod [24] (number of hours)
dbpcomlogrollday [Monday] (1stOfMonth,Sunday,Monday,...,Saturday)
dbpcomlogrollyime [12mid] (12mid,1am,...,11am,12noon,1pm,...,11pm)
dbpcomlogrollyimezone [Local] (Local, GMT)
dbpcomlogdeleteoption [ByFiles] (NoDelete, ByTime, ByFiles)
dbpcomlogdeletemaxtime [168] (number in hours)
dbpcomlogdeletemaxfiles [7] (number of files)

See also
     add pinlist
     clear pinlist
     get pinlist
     remove pinlist

set purgelist go to top

Set proxy purging options
syntax: set purgelist action=<start|abort>

See also
     add purgelist
     clear purgelist
     get purgelist
     remove purgelist

set qos go to top

Set the quality of service settings
syntax: set qos [mode=<6bit>|<8bit>]
[replies=<passthrough|0x00|0x01|...|0xfe|0xff>]
[errors=<0x00|0x01|...|0xfe|0xff>]
note: the maximum bit setting for 6bit mode is 0x3f

See also
     add qos
     clear qos
     get qos
     remove qos

set serverpersistence go to top

Set the server persistence settings
syntax: set serverpersistence enable=<yes|no>

set smc go to top

example: set smc maxDiskUsage=0 - Disk usage will not be limited
parameters: [default] (range)
idleTimeout [60] (10-600) - Idle player timeout in seconds
keepAliveTimeout [45] (10-600) - Default keep alive timeout for origin server in seconds
maxBwPerStream [0] (0-10000) - Max bandwith per player stream in kbps

maxUpStreamBw [0](0

1000000) - Max upstream bandwidth for fills in kbps

maxDownStreamBw [0] (0-1000000) - Max bandwidth for all players in kbps
maxSessions [10000] (1-10000) - Max player sessions
maxDiskUsage [0] (0-10000) - Max disk usage in Gbytes
maxObjectSize [0] (0-4096) - Max object size in Mbytes
maxObjectDuration [0] (0-24) - Max track length in hours
maxLiveObjectDuration [24] (0-24) - Max live track length in seconds
mmsenable [no] (yes,no) - Enable microsoft media streaming
qthttptunnelenable [no] (yes,no) - Enable Quicktime HTTPTunnel media streaming
continuestreamingfilltime [1] (0-360) - Continue streaming fill time in minutes
maxTTL [48] (1-168) - Max TTL for objects in hours
minTTL [3600] (0-86400) - Min TTL for objects in seconds
defaultTTL [24] (1-24) - Default TTL for objects in hours
upstreamProxyEnable [no] (yes, no) - Enable hiearchy operation
upstreamProxyPort [9090] (1-65535) - Hiearchy parent's port

See also
     add smc
     clear smc
     get smc
     remove smc

set smcservice go to top

Set values for a specific service
syntax: set smcservice <servicename> <parameter>=<value>
set smcservice strmsvc enable=yes
parameters: [default] (range)
name [] (8 char alphanumeric) - Name of the service
type [forward] (forward|accelerator)- Type of the service
enable [no] (yes,no) - Enable this service
(Use add) address [] (ipAddress)- Listener addresses for the service
port [9090] (1-65535) - Listener port of the service
(Use add) originAddress [](ipAddress)- Fill addresses for accelerator service
dnsname [name] (DNS name) - Site accelerated by accelerator service
originPort [554] (1-65535) - Fill port for accelerator service
timeshift [no] (yes,no) - Enable timeshifting
extLog=[no] (yes,no) - Enable extended log
extLogRollOption [bySize] (byTime,bySize)- Roll option
extLogRollSize [10] (1-100) - Roll size in Mbytes
extLogRollPeriod [1] (1-744) - Roll period in hours
extLogRollDay [Monday] (days of week) - Roll day
extLogRollTime [12AM] (hours of day) - Roll time
extLogRollTimeZone [Local] (Local, GMT) - Roll time zone
extLogDeleteOption [noDelete] (noDelete,byTime,byFiles) - Delete option
extLogDeleteMaxTime [24] (1-8376)- Max time before deletion in hours
extLogDeleteMaxFiles [7] (1-1000)- Max log files
extLogServerIP [no] (yes,no) - Log server IP address
extLogMethod [no] (yes,no) - Log method
extLogUri [no] (yes,no) - Log URI
extLogVersion [no] (yes,no) - Log RTSP version
extLogStatus [no] (yes,no) - Log RTSP status code
extLogCacheStatus [no] (yes,no) - Log Cached status

See also
     add smcservice
     clear smcservice
     get smcservice
     remove smcservice

set snmp go to top

Set the parameters for snmp
syntax: set snmp name = <machine name>
syntax: set snmp hardware = <hardware vendor>
syntax: set snmp location = <location>
syntax: set snmp contact = <name>
syntax: set snmp monitor = <monitor community name>
syntax: set snmp control = <control community name>
syntax: set snmp trapcommunity = <trap community name>
syntax: set snmp trap = <ip address> [;<ip address>]
location - Location of this machine

name

Person to contact

group name - Group name of this machine
ip address - IP Address of the snmp

See also
     add snmp
     clear snmp
     get snmp
     remove snmp

set socks go to top

Set socks configuration parameters
syntax: set socks <parameter> = <value>
parameters: [default value] (possible values)
Enable [no] (no, yes_v4, yes_v5)
Server [none] (any)
Port [1080] (1-65535)
AuthenticationMethod [no] (no, password)
ClientUserName [none] (any)
ClientPassword [none] (any)

See also
     add socks
     clear socks
     get socks
     remove socks

set timezone go to top

Set timezone on the appliance
syntax: set timezone [offset=<hh:mm>][,name=<nam>][,dsname=<dsn>]

See also
     add timezone
     clear timezone
     get timezone
     remove timezone

set transparent go to top

syntax: set transparent <parameter> = <value>
parameters: [default value] (possible values)
Enable [no] (yes, no) - turn on or off transparent proxy
Port [none] (1-65535) - set as only port
IPAddress [none] (any) - set as only local IP address
ExceptionAddress [none] (any) - set as only exception address
ErrorHandling [SendCacheError] (ResetConnection,SendCacheError,Transparent) - set error handling method
SSLPort [443] (1-65534) - sets the port used for ssl communication
SSLKeyId (any) - sets the name of the certificate for use for ssl communication
CustomCacheHeaderEnable [No] (Yes, No) - enable or disable custom cache headers
CustomeCacheHeader (any) - sets a custom cache header
AllowConnect [No] (Yes, No) - enable or disable whether connects are allowed
ConnectAllowOnlySSL [Yes] (Yes, No) - enable or disable whether connects must use SSL
SendXForwardedForHeader [No] (Yes, No) - enable or disable X-Forwarded-For headers
syntax2: set transparent authentication <parameter=value>
parameters: [default value] (possible values)
Enable [Yes] (Yes, No)
Profile [none] (Valid profile name)
SSLMaxIdleTime [30] (time in minutes)
PromptOnFailure [No] (Yes, No)

See also
     add transparent
     clear transparent
     get transparent
     remove transparent

set upgrade go to top

Shows the settings for upgrade
Set Upgrade Patch EnableDownload = <download parameter>
Set Upgrade Patch EnableInstall = <install parameter>
Set Upgrade Patch InstallTime = <time>
Set Upgrade Patch DownloadTime = <time>
Set Upgrade Patch InstallUrl = <urlString>
example :
Set Upgrade Patch InstallUrl = http://hostname:1959/ca/version.txt
Parameter list :
<download parameter> = yes/no
<install parameter> = yes/no/backout
<urlString> = http://support.novell.com/ca/version.html
<time> = immediately/<time value>
<time value> = 12am,1am,2am....

See also
     add upgrade
     clear upgrade
     get upgrade
     remove upgrade

set wccp go to top

Set WCCP options
syntax: set wccp [parameter] = <value>
enable - set the WCCP enable state

proxyname	-	set the WCCP name for the appliance
farmname	-	set the WCCP cache farm name of router
router	-	set the WCCP router IP address
cache	-	set the WCCP cache IP address
version	-	set the WCCP protocol version
routergroup	-	set the WCCP router group
service	-	set the WCCP service group

See also
     add wccp
     clear wccp
     get wccp
     remove wccp

accelerator	-	settings for configuring the HTTP accelerator
adminacl	-	settings for Administration ACLs
alert	-	settings for configuring alert name server features
authentication	-	settings for authenticating
certificate	-	settings for certificates of authority
cluster	-	settings for configuring appliance clusters
dhcp	-	settings for configuring dhcp server features
dns	-	settings for configuring domain name server features
download	-	settings for http download
eth0	-	settings for configuring IP addresses for connection eth0
filter	-	settings for configuring URL blocking filters
forward	-	settings for configuring the HTTP forward proxy
ftpaccelerator	-	settings for configuring the FTP accelerator
ftpforward	-	settings for configuring the FTP forward proxy
gateway	-	settings for configuring routing features
icpneighbor	-	designation of neighboring ICP caches
icpresponder	-	NOT SUPPORTED, use "add/remove icptrustedlist"
icprouting	-	settings for configuration of ICP routing
icpserver	-	list of providers for ICP cache filling
icptrustedlist	-	settings for configureation of ICP trusted list
ipaclist	-	settings for IP access control
ipaclist	-	settings for IP access control
logpush	-	settings for pushing logs off the appliance
miniftpserver	-	settings for configuring the miniFTP server
miniwebserver	-	settings for configuring the miniwebserver
ntp	-	settings for NTP time synchronization
pinlist	-	settings for proxy pinning list
purgelist	-	settings for proxy purging list
smc	-	settings for configuring streaming media caching
smcservice	-	settings for configuring streaming media caching services
socks	-	settings for SOCKS client
transparent	-	settings for configuring the transparent proxy
wccp	-	settings for configuring WCCP cache farm memberships

accelerator	-	settings for configuring the HTTP accelerator
addons	-	get list of client side add ons
adminacl	-	settings for Administration ACLs
alert	-	settings for configuring alert name server features
authentication	-	settings for authenticating
cache	-	settings for global cache options
certificate	-	settings for certificates of authority
cluster	-	settings for configuring appliance clusters
comlog	-	the common cache log on the appliance
configfile	-	get a configuration file from the Web to the appliance
configfiles	-	list/delete the configuration files on the appliance
date	-	the date and time on the appliance
dhcp	-	settings for configuring dhcp server features
dns	-	settings for configuring domain name server features
download	-	settings for http download
downloadSequentially	-	specify if downloads should be sequential
dsend	-	the date that daylight saving time ends
dsstart	-	the date that daylight saving time starts
dstime	-	the daylight saving time on the appliance
eth0	-	settings for configuring IP addresses for connection eth0
extlog	-	the extended cache log on the appliance
filter	-	settings for configuring URL blocking filters
floppy	-	settings for use of the floppy drive on the appliance
forward	-	settings for configuring the HTTP forward proxy
ftpaccelerator	-	settings for configuring the FTP accelerator
ftpforward	-	settings for configuring the FTP forward proxy
gateway	-	settings for configuring routing features
icpclient	-	settings for requesting of ICP cache filling
icpmulticast	-	enable/disable ICP multicast group
icpmulticastgroup	-	settings for configuration of ICP multicast group
icpneighbor	-	designation of neighboring ICP caches
icpresponder	-	NOT SUPPORTED, use "set/get icptrustedlist"
icprouting	-	settings for configuration of ICP routing
icpserver	-	list of providers for ICP cache filling
icptrustedlist	-	settings for configuration of ICP trusted list
ipaclist	-	settings for IP access control
logpush	-	settings for pushing logs off the appliance
miniftpserver	-	settings for configuring the miniFTP server
miniwebserver	-	settings for configuring the miniwebserver
ntp	-	settings for NTP time synchronization
pinlist	-	settings for proxy pinning list
purgelist	-	settings for proxy purging list
qos	-	settings for quality of service passthrough
serverpersistence	-	settings for server persistence settings
smc	-	settings for configuring streaming media caching
smcservice	-	settings for configuring streaming media caching services
socks	-	settings for SOCKS client
stats	-	display a statistical snapshot of the appliance
timezone	-	the timezone on the appliance
transparent	-	settings for configuring the transparent proxy
upgrade	-	settings for upgrading cache appliance
wccp	-	settings for configuring WCCP cache farm memberships

Accelerator	-	add a new accelerator named <accelerator name>
syntax 2:
WebServer	-	Add another address to named accelerator
Address	-	Add another IP address
CustomCacheHeader	-	add a custom cache header
syntax3: add accelerator xxx authentication profile=<value>

server	-	Name of new server managed by the cluster
service	-	Name of new service managed by the cluster

server	-	Remove all servers from the cluster
service	-	Remove all services from the cluster

server	-	list all DNS servers
alias	-	alternate name for this server
domain	-	list the domain context for this appliance
enablemonitor	-	monitor state of DNS servers with periodic ping

address	-	display all addresses assigned to this connection
mask	-	display all subnets assigned to this connection
nat	-	display all nat status

server	-	Name of server to remove from the cluster
service	-	Name of service to remove from the cluster

sname	-	name used to identify the service
syntax 2: delete filter override=<urlmask>
urlmask	-	URL mask to use for auto allow/block override
syntax 3: delete filter bypass=<IP Address:port>

domain	-	context for this appliance when resolving DNS names
syntax (alias) : set dns alias=<name>
alias	-	alternate name for this server
syntax (server): set dns server=<IPAddress>
server	-	IP address of a DNS server
syntax (enablemonitor): set dns enablemonitor=yes\|no
enablemonitor	-	allow periodic ping of dns servers

saveonapply	-	write a copy of the settings to the floppy on apply
poll	-	appliance will check the floppy for an inserted disk
interval	-	number of seconds between checks for a floppy