| |
To configure a board for PPTP, complete the following steps:
Configure a WHAMAIO board as described in How to Configure Boards for Running PPP over Asynchronous Ports except select AIOPPTP for the driver in Step 4 .
Select the Number of AIOPPTP Ports parameter and select a value.
This number is used in conjunction with the First AIO Port Number parameter to determine the total number of ports, starting with the first port, that are available for use by PPTP.
Valid values range from 4 to 256.
Press Esc to return to the Internetworking Configuration menu; save your changes when prompted.
If you want these changes to take effect immediately, you must first configure a PPP network interface for this board as described in Setting Up in the NetWare Link/PPP documentation.
After configuring a network interface, you can make the changes take effect by restarting the router or selecting Reinitialize System . If you want to configure other parameters, do so now, then restart the router or reinitialize the system when you are finished.
| |