Previous Page: The Secondary Client Address Range Start address must be less than or equal to the Range End address.  Next Page: The subnet mask must be in decimal dot notation, i.e. it must contain 4 numbers separated by. and each number cannot be greater than 255. for example, 255.255.255.0. All the 1 bits must be contiguous and on the left.

The Secondary Client Address Range Start, Secondary Client Address Range End, and Secondary Local IP Address must be on the same network.

Source:  PPPNCF

Explanation:  The Secondary Client Address Range Start, Secondary Client Address Range End, and Secondary Local IP Address must be on the same network.

Action:  Verify that all the addresses are on the same network. To apply the subnet mask to all three addresses, use AND with the mask with all the addresses to produce the same value in all three cases.

  Previous Page: The Secondary Client Address Range Start address must be less than or equal to the Range End address.  Next Page: The subnet mask must be in decimal dot notation, i.e. it must contain 4 numbers separated by. and each number cannot be greater than 255. for example, 255.255.255.0. All the 1 bits must be contiguous and on the left.