Novell Messenger 2.1

May 28, 2010

1.0 Overview

The information in this Readme file pertains to Novell Messenger 2.1.

This release includes updates for the NetWare, Linux, and Windows Messenger software. The NetWare and Windows software is provided in one set of downloads; the Linux software, including the Linux/Mac client, is provided in a separate set of downloads.

2.0 System Requirements

The system requirements for Novell Messenger 2.1 are the same as those listed in the Novell Messenger Hardware and Software Requirements in the Novell Messenger 2.1 Installation Guide.

3.0 NetWare/Windows: Software Installation

3.1 NetWare/Windows: Server Installation Instructions

  1. Download the NetWare/Windows Novell Messenger 2.1 Administration compressed executable file (nm210_full_nlmwin_multi.zip) to a temporary directory on your NetWare or Windows server.

    There is no English-only download.

  2. Extract the .exe file into a directory at the root of your local drive or to a network server drive that can handle long pathnames.

    The compressed file contains directory paths that could exceed DOS limits.

  3. In Windows, click Start > Run > Browse, then locate the directory where you extracted the administration files.

  4. Select the setup.exe file, then click OK to run the Messenger Installation program.

  5. Click Install Server, then click Yes to accept the license agreement.

  6. Select Create or Update a System, then click Next.

  7. Follow the on-screen instructions provided in the Messenger Installation program to update the software.

    For additional instructions, refer to the Novell Messenger 2.1 Installation Guide on the Novell Messenger 2.1 Documentation Web site.

3.2 Windows: Client Software Installation Instructions

  1. In your Web browser, enter the IP address of the Novell Messenger Download page.

    This is the IP address and port of the Messaging Agent. By default, the Messaging Agent port is 8300. For example, if you installed to a server with an IP address of 172.16.5.18, the Novell Messenger Download page would be http://172.16.5.18:8300.

  2. Follow the on-screen instructions to download the client.

  3. In Windows, click OK to run the Messenger Installation program.

  4. Follow the on-screen instructions provided in the Messenger Installation program to install the software.

4.0 Linux: Software Installation

4.1 Linux: Server Installation Instructions

  1. Download the Novell Messenger 2.1 Administration/Client compressed tar file (nm210_full_linux_multi.tar.gz) to a temporary directory on your Linux server.

    The Novell Messenger administration/client RPMs include all languages, so there is no English-only download.

  2. In a terminal window at your Linux server, change to the temporary directory, then use the following command to uncompress and untar the downloaded file:

    tar -xz nm210_full_linux_multi.tar.gz

    The result is a directory named nm210_full_linux_multi.

  3. Change to the nm210_full_linux_multi directory.

  4. Become root by entering su - and then the root password.

  5. Use the following command to start the Novell Messenger Installation program:

    ./install.sh

  6. Follow the on-screen instructions to create or update your Messenger system.

    For additional instructions, refer to the Novell Messenger 2.1 Installation Guide on the Novell Messenger 2.1 Documentation Web site.

4.2 Linux: Client Software Installation Instructions

  1. In your Web browser, enter the IP address of the Novell Messenger Download page.

    This is the IP address and port of the Messaging Agent. By default, the Messaging Agent port is 8300. For example, if you installed to a server with an IP address of 172.16.5.18, the Novell Messenger Download page would be http://172.16.5.18:8300.

  2. Follow the on-screen instructions to download the client.

  3. Change to the directory where you downloaded the file.

  4. Enter the following command:

    sh ./nvlmsgr.bin

  5. To start the Linux client after installation, click the Messenger icon on your Linux desktop.

4.3 Mac: Client Software Installation Instructions

  1. In your Web browser, enter the IP address of the Novell Messenger Download page.

    This is the IP address and port of the Messaging Agent. By default, the Messaging Agent port is 8300. For example, if you installed to a server with an IP address of 172.16.5.18, the Novell Messenger Download page would be http://172.16.5.18:8300.

  2. Follow the on-screen instructions to download the client.

  3. To start the Mac client after installation, click the Messenger icon on your Macintosh desktop.

4.4 Compatibility with Other Instant Messaging Systems

If you use Cerulean Trillian Pro to communicate between instant messaging systems, a Novell Messenger plug-in is available at the Cerulean Studios Web site:

The Pidgin (formerly Gaim) open source instant messaging connector is available at the Pidgin Web site.

The Kopete open source instant messaging plug-in is available at the Kopete Web site.

5.0 Known Issues for Administration

5.1 Setup.exe File Does Not Display the Installation Page on a 64-Bit Server

On a 64-bit server, running the Setup.exe file at the root of the image does not display the main Novell Messenger Installation page.

To work around this issue:

  1. Manually run either the server or client Setup.exe files, which are located in the server and client folders, respectively.

5.2 Extending the eDirectory 8.8.5 Schema When Using LDAP Mode on Linux

When installing Messenger with eDirectory 8.8.5 with LDAP mode on Linux, you must manually extend the eDirectory schema.

How you extend the schema depends on whether eDirectory is installed locally or remotely.

5.2.1 Extending the eDirectory 8.8.5 Schema When eDirectory is Installed Locally on the Server

5.2.2 Extending the eDirectory 8.8.5 Schema When eDirectory is Installed on a Remote Server

  1. Extend the schema using the Windows installer’s Extend schema only option, as described in Configuring Your Messenger System on Linux in Installing a Novell Messenger System in the Novell Messenger 2.1 Installation Guide.

5.3 Library Dependency on SUSE Linux Enterprise Server 11

When running Messenger on SUSE Linux Enterprise Server (SLES) 11, you need to install the libstc++.so.5 or greater library.

5.4 Case-Sensitive Passwords Do Not Work with eDirectory 8.8

If you try to connect to eDirectory 8.8 from Novell Messenger with a case-sensitive password, eDirectory 8.8 might not recognize the case-sensitive password. For information on how to enable case-sensitive passwords in eDirectory 8.8, see “How to Make Your Password Case-Sensitive” in the eDirectory 8.8 What’s New Guide.

5.5 Encrypted Messenger Attributes in eDirectory 8.8

If you are storing any encrypted Novell Messenger attributes in eDirectory 8.8, you cannot see these attributes in ConsoleOne until they are unencrypted.

5.6 New Messenger Client Is Not Compatible with the Older Messenger Server

The Novell Messenger 2 Support Pack 2 and later clients are unable to connect to any Novell Messenger system that is older than Novell Messenger 2 Support Pack 1.

6.0 Known Issues for the Clients

6.1 Limited Language Support in Novell Conferencing

Novell Conferencing provides support for the English, French, and German languages only. If you are using Novell Messenger to launch a Novell Conferencing meeting, as described in Using Novell Messenger with Novell Conferencing in the Novell Messenger 2.1 Client User Guide, the language in which you are viewing Novell Messenger might not carry over to Novell Conferencing.

For example, if you are viewing Novell Messenger in Chinese and want to launch a Novell Conferencing meeting, your Conferencing meeting would be displayed in English.

7.0 Documentation

For information about Novell Messenger 2.1, see the online product documentation: Novell Messenger 2.1 Documentation Web Site.

8.0 Legal Notices

Novell, Inc. makes no representations or warranties with respect to the contents or use of this documentation, and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Further, Novell, Inc. reserves the right to revise this publication and to make changes to its content, at any time, without obligation to notify any person or entity of such revisions or changes.

Further, Novell, Inc. makes no representations or warranties with respect to any software, and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Further, Novell, Inc. reserves the right to make changes to any and all parts of Novell software, at any time, without any obligation to notify any person or entity of such changes.

Any products or technical information provided under this Agreement may be subject to U.S. export controls and the trade laws of other countries. You agree to comply with all export control regulations and to obtain any required licenses or classification to export, re-export or import deliverables. You agree not to export or re-export to entities on the current U.S. export exclusion lists or to any embargoed or terrorist countries as specified in the U.S. export laws. You agree to not use deliverables for prohibited nuclear, missile, or chemical biological weaponry end uses. See the Novell International Trade Services Web page for more information on exporting Novell software. Novell assumes no responsibility for your failure to obtain any necessary export approvals.

Copyright © 2007-2010 Novell, Inc. All rights reserved. Permission is granted to copy, distribute, and/or modify this document under the terms of the GNU Free Documentation License (GFDL), Version 1.2 or any later version, published by the Free Software Foundation with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the GFDL can be found at http://www.fsf.org/licenses/fdl.html.

For Novell trademarks, see the Novell Trademark and Service Mark list.

All third-party trademarks are the property of their respective owners.