Novell Documentation: Novell Audit 2.0

9.3 Secure Logging Server

The Novell Audit Secure Logging Server should be running on your server. The following table outlines the startup commands for each platform:

IMPORTANT:You must individually start or stop each logging server in the tree.

Table 9-1 Secure Logging Server Startup Commands

Platform	Startup Command
Windows	To determine if the Novell Audit Manager service is running, open the Services applet from Control Panel > Administrative Tools. On Windows, the startup script for the Secure Logging Server is included in the naudit.exe file. Naudit.exe has an Automatic startup type so lengine.exe loads each time the server restarts. To manually load or unload the Secure Logging Server on Windows, you must start or stop the Novell Audit Manager service: Click Start > Settings > Control Panel. Open the Services window. On Window NT, select Services. On Windows 2000 and XP, select Administrative Tools > Services. In the list of installed services, right-click Novell Audit Manager, then select Start or Stop.
NetWare®	Lengine.nlm should be running on the server hosting the Secure Logging Server. This is configured to load automatically at startup during install. To determine if lengine.nlm is loaded, enter m lengine at the NetWare command prompt. If lengine is not loaded, reload it and check the NetWare logger screen for any messages. To manually load the Secure Logging Server on NetWare, enter load lengine or load auditsvr.ncf If you want to prevent the Secure Logging Server from being unloaded by users with access to the server console, you can append the -n switch to the server startup script. (For example, load lengine -n .) To manually unload the Secure Logging Server on NetWare, enter unload lengine NOTE:Lengine.nlm and auditsvr.ncf are located in the sys:\system directory.
Linux	To verify that the Secure Logging Server is running, use the following command: ps -ef \|grep lengine The Linux startup script for the Secure Logging Server is /etc/init.d/novell-naudit . This startup script loads lengine each time the server restarts. To manually start the Secure Logging Server on Linux, enter /etc/init.d/novell-naudit start To stop the Secure Logging Server on Linux, enter /etc/init.d/novell-naudit stop
Solaris	To verify that the Secure Logging Server is running, use the following command: ps -ef \|grep lengine On Solaris, the startup script for the Secure Logging Server is /etc/init.d/naudit . This startup script loads lengine each time the server restarts. To manually start the Secure Logging Server on Solaris, enter /etc/init.d/naudit start To stop the Secure Logging Server on Solaris, enter /etc/init.d/naudit stop

For more information on the Secure Logging Server, see Section 7.0, Configuring the Secure Logging Server and Configuring the Secure Logging Server in the Novell Audit 2.0 Administration Guide.