12.2 Installing HylaFAX

  1. Log into the NOWS SBE console.

  2. Click Add/Remove under Components, click All under Available Software, then select Fax Server (HylaFAX).

  3. Click Basic, then click Next.

  4. Specify the HylaFAX configuration settings.

    • Machine Type: Select Send and Receive if you are using this machine to both send and receive faxes. Select Send Only if you do not have a dedicated phone line or if you only want to send faxes from your machine.

    • Fax Identification String: This is the identification that is sent out with each fax; a good choice would be your company name.

    • Country Code: Country code of your fax server.

    • Area Code: Area code of your fax server.

    • Long Distance Prefix: Long-distance prefix for your fax server.

    • International Prefix: The prefix you need for an international call.

    • Dial Out Prefix: Specify a number here if the fax modem needs to specify a number to go outside of your internal phone network.

  5. Specify the modem configurations.

    • Modem Device: The TTY port of your fax modem is a serial port modem. It is probably something like /dev/ttyS1. If this is an internal or built-in modem, Linux modem drivers need to be configured.

    • Phone Number of the Fax-modem: Phone number of the fax modem.

  6. Review the settings. To make a change, click Back. To proceed with the installation, click Next.

  7. The HylaFAX installation is now complete. Click Finish to proceed to the installed software page.

HylaFAX is now listed on the installed software list and can be administered from the HylaFAX administration link.