Use this command at the System Console prompt to start one or more secondary processors when the server is running on a multiprocessor computer.
NOTE:Because NetWare® is running on processor 0, the boot processor, START PROCESSORS affects only secondary processors.
START PROCESSORS [n...]
|
Parameter |
Use to |
|---|---|
|
(no parameters) |
Start all secondary processors. |
|
n... |
Specify by processor number the secondary processors to start. |
To bring a specific secondary processor online, enter at the console prompt:
START PROCESSORS 1
A confirmation message is displayed:
Processor 1 is ONLINE.
To bring all secondary processors online, enter at the console prompt:
START PROCESSORS
A confirmation message is displayed:
Processor 1 is ONLINE.
Processor 2 is ONLINE.
Processor 3 is ONLINE.
If you choose to start secondary processors when NetWare boots, use Set Auto Start Processors = Off in the startup.ncf file (see Multiprocessor Parameters).
To stop secondary processors, see Section 1.162, STOP PROCESSORS.
For more information, see Starting and Stopping Processors
in the NW 6.5 SP8: Server Operating SystemAdministration Guide.