Previous Page: NWTAPE.CDM: WARNING! Driver has not been tested with device_name. The driver has bound to the device to provide Generic support. Contact the device manufacturer for a full-functioned driver.  Next Page: NWTAPE.CDM: WARNING! Device name is not SCSI-2 compliant. See if device is jumper selectable to SCSI-2 mode.

NWTAPE.CDM: WARNING! Driver had an error with device name; therefore, driver did not bind to device.

Source:  NWTAPE.CDM

Explanation:  There is a problem with some aspect of the hardware. The driver could not be loaded.

Action:  Check cables, termination, and the SCSI ID of the device. If these are not the source of the problem, check the drive. It might need to be repaired or replaced.

  Previous Page: NWTAPE.CDM: WARNING! Driver has not been tested with device_name. The driver has bound to the device to provide Generic support. Contact the device manufacturer for a full-functioned driver.  Next Page: NWTAPE.CDM: WARNING! Device name is not SCSI-2 compliant. See if device is jumper selectable to SCSI-2 mode.