| |
LANSUP-DOS-X-050: [ISA bus | Microchannel] The board cannot be found.
Source: LANSUP.COM
Explanation: If the computer is using an ISA bus network board, the network board was not found due to one or more of the following conditions:
Possible Cause: The network board is not present in the computer.
Action: Make sure the network board is properly seated into the slot.
Possible Cause: Another network board is using the same hardware settings as this network board.
Action: If other network boards are using the same hardware settings, change the settings and try to reload the driver.
Possible Cause: The network board settings are not the defaults, and they are not defined in the NET.CFG file.
Action: If the jumper settings are not the defaults, make sure that they match the settings in the NET.CFG file.
Action: If the computer is not using the NET.CFG file, make sure the jumper settings are set to the defaults.
Possible Cause: The network board is does not work.
Action: Replace the network board with one that you know works.
Action: If the computer is using a microchannel network board, the network board is not in the computer, or the network board's configuration could not be obtained, do the following:
| |