Novell Documentation: NetWare 6

RCONPRXY

Purpose

Load at the server console to create an RConsoleJ proxy server on a NetWare^® 6 server. RConsoleJ proxy servers allow RConsoleJ to access target servers using an IPX^TM (or IP) connection.

Syntax

[LOAD] RCONPRXY TCP_Port

Parameter	Use to
(no parameter)	Start RCONPRXY without command line parameters. You will be prompted for a TCP port number.
TCP Port	This is the TCP port number on which RCONPRXY will listen for RConsoleJ. The default is 2035. 0 allows a dynamically assigned port to be used.

Parameter

Use to

(no parameter)

Start RCONPRXY without command line parameters. You will be prompted for a TCP port number.

TCP Port

This is the TCP port number on which RCONPRXY will listen for RConsoleJ.

The default is 2035.

0 allows a dynamically assigned port to be used.

Using RCONPRXY

Use RCONPRXY.NLM to allow RConsoleJ to communicate with an NetWare 6 server IPX-only.

RCONPRXY creates a proxy server through which RConsoleJ can communicate with the IPX-only server.

The proxy server must run both IP and Streams-based SPX^TM services.
To load Streams-based SPX services on the proxy server, use the SPXS NLM^TM program.

Additional Information

Topic	See
Loading RCONAG6	RCONAG6
Setting up a proxy server	See Loading the RConsoleJ Proxy Agent on a Proxy Server in Setting Up RConsoleJ in the Remote Server Management Administration Guide
Using RConsoleJ	RConsoleJ