Novell Doc: OES 1 - Commands for Mounting CDs and DVDs as NSS Volumes (NetWare)

23.12 Commands for Mounting CDs and DVDs as NSS Volumes (NetWare)

Cddvd.nss is loaded automatically on startup by default. Use the following commands to manage CDs, DVDs, and Macintosh CDs as NSS volumes on Netware.

NOTE:The cddvd.nss module replaces cdrom.nlm and cd9660.nss for CD support, udf.nss for DVD support, and cdhfs.nss for Macintosh CD support. The following commands for cddvd.nss are the same ones used for previous CD and DVD management modules.

Commands	Description
CDDVD	If CDDVD is specified in the nssstart.cfg file, loads only those modules essential for CD and DVD support.
nss /(No)LeaveCDinNDS	If the switches UpdateCDToNDS or LoginUpdateCDToNDS is enabled, enable this switch to retain the CD or DVD volume objects when the actual disks are removed. [Default=Off]
nss /(No)LoadISOVolumeFirst	If this switch is enabled, tries to load UDF-bridge CD as and ISO9660 volume first. By default, a UDF-bridge CD is loaded as DVD format first and CD format second. [Default=Off]
nss /(No)LockCDMediaIn	If this switch is enabled, whenever CDs or DVDs are activated or deactivated as NSS volumes, locks or unlocks the media in the device. [Default=Off]
nss /(No)UpdateCDToNDS	If this switch is enabled, whenever CDs or DVDs are activated or deactivated as NSS volumes, updates their Novell eDirectory objects. [Default=Off]
nss /(No)LoginUpdateCDtoNDS	If this switch is enabled, whenever CDs or DVDs are activated or deactivated as NSS volumes, updates their Novell eDirectory objects. You must login as admin. [Default=Off]
nss /(No)MountISODiscSetInOneVolume	If this switch is enabled, cddvd.nss attempts to load an ISO9660 multiple-disk set as a single NSS volume. This volume is not mounted until all disks among the set are available to cddvd.nss. If this switch is disabled, cddvd.nss mounts each disk in the set as one individual NSS volume. [Default=Off]