Novell Doc: OES 2 SP3: Getting Started with OES and Virtualized NetWare

1.1 Lab Setup Requirements

For the tasks and exercises described in this guide, you need the following:

A server-class computer with the following:

Component	Minimum	Recommended
Processor	Pentium* II or AMD* K7 450 MHz	Pentium III, Pentium III Xeon, Pentium 4, Intel Xeon 700 MHz, AMD K8 CPUs (Athlon64 and Opteron*), Intel EM64T or higher processor
RAM	1 GB	2 GB
Display adapter	Super VGA	VESA 1.2-compliant, high resolution
Display monitor	Compatible with adapter
CD drive	Support for the ElTorito specification
Hard drive (All data will be erased)	20 GB
Network card	Ethernet 100 Mbps
IP address	IP address on the lab subnet. For example, 192.168.1.100. Subnet mask. For example, 255.255.255.0. Default gateway. For example, 192.168.1.1.
Mouse	Not required	USB or PS/2^*

A network printer with an assigned static IP address and a connection to your lab network.
A Windows workstation with
- One of the following platforms installed:
  - Windows XP
  - Windows 2000
- An Ethernet 100 Mbps adapter
- An IP address on the same subnet as the server
- Mozilla^* Firefox^* browser installed. (This is optional, but Firefox is the assumed browser for most of the instructions in this guide)
- A print driver installed on the workstation for the network printer listed above.
(Optional for exploring Novell AFP and iPrint) An Apple^* Macintosh^* workstation with
- Mac OS^* 10.4 or later installed
  
  Novell AFP supports earlier versions of Mac OS, but iPrint doesn’t.
- An Ethernet adapter
- An IP address on the same subnet as the server
- A print driver installed on the workstation for the network printer listed above.