4.2 Scheduled Power Management

The Intel AMT devices should be configured either in Small Business Mode or Enterprise Mode. For more information on the configuration steps, see Section 3.0, Configuring Intel AMT Devices.

IMPORTANT:If the server that is required to trigger the power management operation on the Intel AMT devices has a power management schedule set, it is possible that the server might reset or power off before the power management operation is successfully performed on the Intel AMT devices.

  1. In ZENworks Control Center, click Configuration.

  2. In the Management Zone Settings panel, click Device Management > Power ManagementSettings.

  3. In the Power Management Settings panel, click Add.

  4. Click the desired power state.

    The supported power states include Power On, Power Off, Reset and Power Cycle Reset.

  5. In the Schedule Editor dialog box, select one of the following schedule types:

    • No Schedule: Does not trigger the power state on the device.

    • Recurring: Triggers the power state at specified intervals on the device

  6. Click Apply, then click OK.

By default, the Power Management settings configured at the zone level are applied to all the devices within the Management Zone. However, you can choose to override the settings at the device level or folder level.