The Remote Management performance, especially over a slow link, has been enhanced through using improved compression.
The performance during a Remote Management session over a slow link or a fast link varies depending on the network traffic. For better response time, try one or more of the following strategies:
Select the option on the managed workstation in the Control Parameters dialog box.
Assign color settings on the management console higher than the managed workstation or assign the same color settings for the management console and the managed workstation.
Select or mode in the Control Parameters dialog box to enhance the Remote Management performance.
The speed of the management console depends upon the processing power of the client machine. We recommended that you to use single-processor client with a Pentium III, 500MHz (or later).
Deselect the Enable Pointer Shadow option before starting the Remote Control or Remote View session.
To disable Enable Pointer Shadow:
At the managed workstation, use a plain background. Do not set a wallpaper pattern.
If the Task manager is opened at the target machine, you should minimize it or close it if possible.
Make sure that the scrolling texts (such as the debug windows) and animations are not active on the managed workstation.
Make sure to minimize or close the dialog boxes that are not in use.
To perform any operations at the managed workstation, if possible, use the toolbar options instead of menu options.
To maximize the Remote Management performance over WAN, configure the following settings in the Control Parameters dialog box at the managed workstation:
Set the color mode of the managed workstation to 16 Color.
Select the option.