If the IP address for a virtual (NCP) server does not change properly, the problem may be caused by one of the following conditions:
The IP address has been changed only on the load and unload script pages.
You must also change the IP address on the protocols page for the virtual server. Changing the IP address on the protocols page causes the load and unload scripts to automatically update.
The virtual server has an extra IP address.
Use the General tab in ConsoleOne® to view the IP addresses for the virtual server. If there are extra IP addresses, do the following:
In ConsoleOne, click
and disable the tab.Click
to exit the properties dialog box.Access the properties dialog box again.
Click the
tab and delete the extra IP addresses.The attribute is Network Address. Do not delete the entire attribute, just the values for the extra IP addresses.
Click
and enable the tab.Click
to save your changes.