Novell Home

My Favorites

Close

Please to see your favorites.

How to turn RIP off for TCP/IP using the AUTOEXEC.NCF

(Last modified: 09Oct2002)

This document (10062006) is provided subject to the disclaimer at the end of this document.

goal

How to turn RIP off for TCP/IP using the AUTOEXEC.NCF

fact

Novell NetWare 5.1

Novell NetWare 5.0

Novell NetWare 4.11

fix

AUTOEXEC.NCF
Load TCPIP RIP=OFF

INETCFG
Protocol Level
1. PROTOCOLS | TCPIP
2. Set RIP to DISABLED
3. ESC, UPDATE, REINITIALIZE SYSTEM

Network Interface Level
1. BINDINGS - highlight and hit enter on the TCPIP binding.
2. RIP BIND OPTIONS
3. DISABLE
4. ESC, UPDATE, REINITIALIZE SYSTEM

disclaimer

The Origin of this information may be internal or external to Novell. Novell makes all reasonable efforts to verify this information. However, the information provided in this document is for your information only. Novell makes no explicit or implied claims to the validity of this information.
Any trademarks referenced in this document are the property of their respective owners. Consult your product manuals for complete trademark information.

  • Document ID:
  • 10062006
  • Solution ID: NOVL45593
  • Creation Date: 26Apr2001
  • Modified Date: 09Oct2002
    • NovellNetWare

      BorderManager Services

Did this document solve your problem? Provide Feedback