Novell Home

My Favorites

Close

Please to see your favorites.

How to configure BorderManager 3.8 Site-to-Site VPN with CISCO IOS 12.2(11) T server

(Last modified: 20Jan2004)

This document (10090479) is provided subject to the disclaimer at the end of this document.

goal

How to configure BorderManager 3.8 Site-to-Site VPN with CISCO IOS 12.2(11) T server

fact

Novell BorderManager 3.8

fix

Note: Parts of the text below were copied from Novell Cool Solutions website. The original text of the solution could be found at: http://www.novell.com/coolsolutions/bordermag/features/a_cisco_ios_12.2_bm.htmlhttp://www.novell.com/coolsolutions/bordermag/features/a_cisco_ios_12.2_bm.html .

Abstract: This document describes the basic design and interoperability of an IP VPN network on top of a public network infrastructure using CISCO 2600 IOS 12.2 T with a Novell BorderManager (NBM) 3.8 VPN server (site-to-site mode).

Table of Contents:

1.0 Introduction
1.1 IPSec VPN Definition
2.0 Major Components
2.1 Internet Key Exchange (RFC 2409)
2.2 IPSec
2.3 Implementation
3.0 Configuration of the CISCO 2600 with IOS 12.2 (11) T
3.1 Miscellaneous Information on Maps
4.0 NBM 3.8 Configuration
4.1 To add Cisco as a member to this server
4.2 Adding 3rd Party Traffic Rules in NBM 3.8
5.0 Conclusion

To read the complete text of the solution click on the link above.

disclaimer

The Origin of this information may be internal or external to Novell. Novell makes all reasonable efforts to verify this information. However, the information provided in this document is for your information only. Novell makes no explicit or implied claims to the validity of this information.
Any trademarks referenced in this document are the property of their respective owners. Consult your product manuals for complete trademark information.

  • Document ID:
  • 10090479
  • Solution ID: NOVL95065
  • Creation Date: 20Jan2004
  • Modified Date: 20Jan2004
    • NovellBorderManager Services

Did this document solve your problem? Provide Feedback