Novell is now a part of Micro Focus

My Favorites


Please to see your favorites.

NetWare Device Deactivates When Mirroring to iSCSI Target on SLES 11 SP2

This document (7013002) is provided subject to the disclaimer at the end of this document.


Novell NetWare 6.5 Support Pack 8
SUSE Linux Enterprise Server 11 Support Pack 2


NetWare Server is running as an iSCSI Initiator
SUSE Linux Enterprise Server 11 is an iSCSI Target
NetWare Server connects successfully to targets on SLES 11 server
As soon as mirroring starts on NetWare server, the iSCSI target device deactivates and is no longer available.


On the OES11 SP2 server, edit /etc/ietd.conf.  Add the following line to the file (after the Target line, and before the LUN line) :
MaxRecvDataSegmentLength 32768
Restart the OES 11 server, or just restart the iSCSI Target service.
Execute iscsinit connect <target IP address> on the NetWare server
The failed mirror should automatically start where it left off


There was a change in the iSCSI target software between OES 11 SP1 and OES 11 SP2


This Support Knowledgebase provides a valuable tool for NetIQ/Novell/SUSE customers and parties interested in our products and solutions to acquire information, ideas and learn from one another. Materials are provided for informational, personal or non-commercial use within your organization and are presented "AS IS" WITHOUT WARRANTY OF ANY KIND.

  • Document ID:7013002
  • Creation Date:07-AUG-13
  • Modified Date:07-AUG-13
    • NovellNetWare
    • SUSESUSE Linux Enterprise Server

Did this document solve your problem? Provide Feedback