PXE boot hangs with VMWARE
This document (7013305) is provided subject to the disclaimer at the end of this document.
- VMWARE workstation 10
- ESX 5.
- VMWARE workstation 8 or 9 configured with 2 CPUs or 1 CPU with dual cores
For ZCM 11.2.4: If it is not possible to upgrade to ZCM 11.3 at this time, Novell has made a Patch available for testing, as part of a Monthly patch update: it can be obtained at https://download.novell.com/Download?buildid=Rbs5fYlojj0~ as "ZCM 11.2.4 Monthly Update 1 - see TID 7014163". This update should only be applied if the symptoms above are being experienced, and are causing problems.
Please report any problems encountered when using this Patch, by using the feedback link on this TID.
This is also fixed in the ZCM 11.2.4 Imaging Driver Update for November 2013, which can be downloaded from https://download.novell.com/Download?buildid=LNiqXqWzBdA~
This is also fixed in "ZCM 11.2.4 fix for PXE boot hangs with VMWARE - see TID 7013305", which can be downloaded from https://download.novell.com/Download?buildid=QdHEph6MUBs~
For ZCM 11.2.3a: This is fixed in the ZENworks Imaging Update for October 2013, which can be downloaded from https://download.novell.com/Download?buildid=Op8McRXXF3o~
This is also fixed in "ZCM 11.2.3 fix for PXE boot hangs with VMWARE - see TID 7013305" which can be downloaded from https://download.novell.com/Download?buildid=pPbqIgYHvIQ~
This Support Knowledgebase provides a valuable tool for NetIQ/Novell/SUSE customers and parties interested in our products and solutions to acquire information, ideas and learn from one another. Materials are provided for informational, personal or non-commercial use within your organization and are presented "AS IS" WITHOUT WARRANTY OF ANY KIND.
- Document ID:7013305
- Creation Date:17-SEP-13
- Modified Date:24-MAR-14
- NovellZENworks Configuration Management
Did this document solve your problem? Provide Feedback