Common Name |
No mapping is necessary for this in the
driver namespace |
This is the naming attribute for eDirectory.
In the sample configurations discussed in this manual, the
value comes from the PbxName attribute. |
case ignore string |
ProvoPBX |
DirXML-pbxName |
PbxName |
Local name for the PBX. |
Single value
case ignore string |
ProvoPBX |
DirXML-pbxLoginName |
LoginName |
Name used to authenticate to PBX. |
Single value
case ignore string
eDirectory and the driver ignore the case, but the PBX itself
might be case sensitive. |
mylogin |
DirXML-pbxPassword |
Password |
Password used to authenticate to PBX. |
Single value
case ignore string
eDirectory and the driver ignore the case, but the PBX itself
might be case sensitive. |
mypassword |
DirXML-pbxBrand |
Brand |
(Optional) Brand/Model of PBX. |
Single value
case ignore string |
Avaya |
DirXML-pbxHotJacks |
HotJacks |
Are jacks hot?
If your environment has cold jacks, you must fill in the Nodes attribute
as well. |
Single value
Boolean |
true |
DirXML-pbxAccessType |
AccessType |
How to access PBX: dialup or telnet. |
Single value
case ignore string |
telnet or Emulate |
DirXML-pbxExtensionLength |
ExtenLength |
The number of digits used for extensions. |
Single value
Numeric string |
5 |
DirXML-pbxPhoneBlockBegin |
PhoneBlockBegin |
Beginning number block of DID extensions
assigned to PBX. |
Single value
Numeric string |
51000 |
DirXML-pbxPhoneBlockEnd |
PhoneBlockEnd |
Ending number block of DID extensions assigned
to PBX. |
Single value
Numeric string |
51999 |
DirXML-pbxNonDidPhoneBlockBegin |
NonDidPhoneBlockBegin |
(Conditional: This attribute is required only
if you use non-DID phone numbers.)
Beginning number block of non-DID extensions assigned to PBX. |
Single value
Numeric string |
600000 |
DirXML-pbxNonDidPhoneBlockEnd |
NonDidPhoneBlockEnd |
(Conditional: This attribute is required only
if you use non-DID phone numbers.)
Ending number block of non-DID extensions assigned to PBX. |
Single value
Numeric string |
60999 |
DirXML-pbxIpAddress |
IpAddress |
Telnet IP address |
Single value
case ignore string |
133.65.121.98 |
DirXML-pbxNodes |
Nodes |
(Required only if you have cold jacks.)
For example, if you had two nodes with three cabinets each, the
nodes listed in this attribute might have the names shown in the
sample value. |
Multi value
case ignore string |
Building H East, 01, 02, 03
Building H West, 04, 05, 06 |