Common Name |
No mapping is necessary for this in the
driver namespace |
This is the naming attribute for eDirectory.
In the sample configurations discussed in this manual, the
value comes from the WorkOrderNumber attribute. |
case ignore string |
WorkOrder1 |
DirXML-nwoExtension |
Extension |
The extension for which the work order
is being performed.
If you are installing a new extension, you can request a particular
extension by entering a number here. If the extension is not available,
the driver assigns the next available extension in numeric order.
If this attribute is blank for an Install work order, the driver
assigns the next available extension in numeric order. |
Numeric string |
12345
or
no value |
DirXML-nwoDueDate |
DueDate |
Work order due date.
Must be in the format MM/DD/YYYY. |
case ignore string |
06/12/2003 |
displayName |
UserName |
Name to be displayed on caller ID.
You can automate the creation of this attribute based on the
name of the User object.
You can use a work order to change just the display name for
an extension, if desired. |
case ignore string |
Doe, John |
DirXML-nwoObjectID |
ObjectID |
(Required by the policies only) The ID
used by policies to associate to the user object.
You can use an ID of your choice, such as the employee ID. |
case ignore string |
0804F |
DirXML-pbxName |
PbxName |
Local PBX name.
This should be the name of the pbxSite object you created
in eDirectory. Use the same name as you put in the Site Object DirXML-pbxPbxName
attribute. |
case ignore string |
ProvoPBX |
DirXML-nwoNode |
PbxNode |
Node where the new extension should be placed.
This is used only for cold jacks. |
integer |
Building H East
Building H West |
DirXML-nwoPhoneType |
PhoneType |
Phone type recognized by the PBX.
This is used by the policies to set up the extension. |
case ignore string |
8410 |
DirXML-nwoDoItNowFlag |
DoItNowFlag |
When set, do the action now and ignore
the due date. This work order is also sent to the Publisher. |
boolean |
false |
DirXML-nwoStatus |
Status |
Status of work order: pending, configured, resolved,
canceled, error. |
case ignore string |
pending |
DirXML-nwoWorkOrderNumber |
WorkOrderNumber |
(Optional) Unique work order number assigned
by a corporate work order system other than eDirectory, such as
a work order database. |
integer |
00001 |
DirXML-nwoAction |
Action |
Work order activity: install, setcor,
modify (you can modify display name or objectID), move, remove, disable,
disconnect. |
case ignore string |
install |
Description |
Description |
(Optional) Description of work order.
If the status is error this will contain a description of the error. |
case ignore string |
New extension |
DirXML-nwoExtensionType |
ExtensionType |
Type of extension to configure. Example:
DID or non-DID. |
case ignore string |
DID |
DirXML-nwoJack |
Jack |
The jack number. Use this to help link
a user ID in eDirectory with an extension on the PBX. |
case ignoring string |
12345 |
DirXML-nwoSendToPublisher |
SendToPublisher |
If set, this work order is sent to the
Publisher for further action. |
case ignore string |
false |
DirXML-nwoDupExtension |
DupExtension |
Extension to use to duplicate attributes
for new configured extension. |
Numeric string |
19876 |
DirXML-nwoPort |
Port |
Required if you have cold jacks.
Port the extension is wired to. If the port is set, the driver
uses that port, whether it is set up as hot or cold jacks.
If you have hot jacks, this information is not necessary;
you can leave the attribute blank. |
case ignore string |
10C0611 |
DirXML-nwoRestrictionClass |
RestrictionClass |
(Optional) Class of restriction, used
to grant specific calling access to the extension. This is used only
on setcor.
If no class of restriction is specified, the extension receives
the default class of restriction as defined in the PBX. |
integer |
01 |