1.1 GroupWise Mobility Service

1.1.1 GroupWise Mobility Administration Console

The GroupWise Mobility Administration console helps you configure and monitor your Mobility system.

Status

GroupWise Sync Agent: The GroupWise Sync Agent communicates with the GroupWise POA to obtain items from users’ mailboxes.

Device Sync Agent: The Device Sync Agent transfers mailbox items to and from users’ mobile devices.

Status:

  • Starting
  • Running

The sync agent is functioning normally.

  • Stopping
  • Stopped

The sync agent is not running.

Actions:

Start Start icon

Start the sync agent.

Stop Start icon

Stop the sync agent.

Administration

Dashboard: Click Dashboard Dashboard icon to display detailed status and statistical information about the functioning of your Mobility system.

Users: Click Users Users icon to monitor GroupWise users and their devices. Here you also add users, resources, and groups to your Mobility system.

Service Configuration: Click Service Configuration Service Configuration icon to configure the Mobility Service, the GroupWise Sync Agent, and the Device Sync Agent. Here you also configure other specialized aspects of your Mobility system.

1.1.2 General

Sync Agent Settings

Log Level: Select the log level for the sync agent log files:

  • Info: Logs informational messages about normal synchronization processing. This log level is suitable for a Mobility administrator who wants to observe the functioning of the Mobility system.

    Info is the default log level and is strongly recommended because it balances the amount of data logged, the amount of disk space required for log files, and the load on the Mobility system.

  • Debug: Logs large quantities of developer-level data. This log level is appropriate for troubleshooting purposes. It puts a heavy load on the Mobility system and should be used only until the troubleshooting activities are completed.

  • Warning: Logs problems that should not adversely affect synchronization processing but should be investigated and resolved for optimum performance. This log level can be appropriate for a smoothly running Mobility system where you only want to be notified of warnings and errors.

  • Error: Logs error messages that indicate critical problems in synchronization processing. This log level puts the least load on the Mobility system because it logs only critical errors, but it does not log sufficient data to help resolve any errors that occur.

Sync Agent Startup: Select whether you want the sync agents to start automatically whenever you restart the Mobility Service.

Maximum Size Settings

Maximum Attachment Size (GroupWise to Device): By default, attachments are synchronized from GroupWise to the mobile devices if they are smaller than 500 KB. Attachments larger than 500 KB are dropped by the GroupWise Sync Agent and do not synchronize to mobile devices.

Increase or decrease the attachment size limit to control the load that attachment processing puts on the GroupWise Sync Agent.

Maximum Send Mail Size (Device to GroupWise): By default, if an item is larger than 500 KB when it is sent from a device, all attachments are stripped from the item before it is sent to GroupWise. In place of each stripped attachment, the user receives a text attachment indicating that the original attachment was stripped because of the size limit and what the size limit is.

Increase or decrease the send mail size limit to control the load that attachment processing puts on the Device Sync Agent.

Dashboard Settings

The Dashboard retains some data over time.

Alert Retention: By default, alerts are retained for 14 days or until you manually delete them.

Statistic History Retention: By default, the historical data used to generate the graphs is retained for 30 days.

Notification Settings

You can configure the Mobility system to notify specified users when critical situations arise that require administrator attention.

Notification Enabled: Select this option to begin sending notifications.

SMTP IP Address: Specify the IP address of an SMTP host for sending email. This could be a GroupWise GWIA server, but you can also use another email system such as sendmail on a Linux server or a personal email account.

SMTP Port: The port number on which the Mobility Service can communicate with the SMTP host.

Authentication User Name: The email user name to send the notification messages from.

Authentication User Password: (Conditional) The email password if one is required on the email account.

System Notifications: A comma-delimited list of email addresses to send a notification to when the Mobility server encounters a critical (red) alert or condition.

Service Notifications: A comma-delimited list of email addresses to send a notification to when a new device needs to be released from the quarantine.

Miscellaneous Settings

MDM Server: Specify the IP address of the ZENworks Mobile Management server where you provided information about your Mobility server. If you configured multiple ZENworks Mobile Management servers with information about your Mobility server, specify the IP addresses in a comma-delimited list.

Send Anonymous Feedback: When you enable anonymous feedback, a script runs daily to gather statistics about the usage of your Mobility system. The statistics are sent daily to Novell.

1.1.3 GroupWise Sync Agent

Server Settings

IP Address / Port: Specify the GroupWise Sync Agent server IP address and port for internal communication within your local network. By default, the GroupWise Sync Agent communicates with the GroupWise POA using port 4500.

POA SOAP URL: Specify the URL where the GroupWise Sync Agent can communicate with the POA, for example:

  • Non-Secure SOAP URL:
  • Secure SOAP URL:
  • http://poa_server_address:soap_port/soap
  • https://poa_server_address:soap_port/soap
Trusted Application Settings

A GroupWise trusted application can log in to a GroupWise Post Office Agent (POA) in order to access GroupWise mailboxes without needing personal user passwords.

Trusted Application Name: Specify the name of the trusted application that enables the GroupWise Sync Agent to log in to the POA.

Trusted Application Key: Specify the trusted application key. The key is encrypted as it is saved.

GroupWise Item Setting

GroupWise Items to Sync: By default, all GroupWise items are synchronized to mobile devices. Deselect any items that you do not want the GroupWise Sync Agent to synchronize.

Miscellaneous GroupWise Settings

Sticky Notes: By default, Sticky Notes are synchronized between GroupWise and mobile devices. Deselect this option if you do not want Sticky Notes to synchronize.

Sticky Notes refer to the following item types:

  • Mobile device: An item created by the device’s Notes app. On iOS devices, the native Notes app is supported. On Blackberry devices, the native Remember app is supported. On Android devices, the third-party TouchDown app and Tasks and Notes for MS Exchange app are supported. For additional information about supported apps, see Synchronizing Sticky Notes in the GroupWise Mobility Service 2014 r2 Administration Guide.

  • GroupWise client: A Discussion Note item created in or moved to the Mobile Notes folder. GroupWise automatically creates the Mobile Notes folder when the Sticky Notes option is enabled. In some cases, the folder might be named Notes rather than Mobile Notes.

Sticky Notes synchronization is bidirectional. Notes that are created, modified, or deleted on the device are synchronized to the Mobile Notes folder. Discussion Note items that are created, modified, or deleted in the Mobile Notes folder are synchronized to the mobile device.

Clear Old Events: By default, when the GroupWise Sync Agent restarts, it processes all accumulated events. Select this option to delete accumulated events (not recommended unless you are troubleshooting).

Ignore Events After: By default, the GroupWise POA does not transfer items to the GroupWise Sync Agent if they are older than 30 days.Decrease this setting to decrease sync agent traffic if device users typically have a smaller window for wanting items retained on their devices.

Poll POA for Events: If the GroupWise POA encounters an error and stops notifying the GroupWise Sync Agent about GroupWise events, GroupWise events stop synchronizing to mobile devices. By default, the GroupWise Sync Agent polls the POA for new events every 3600 seconds (1 hour). Adjust the frequency of POA polling based on the stability of the POA.

1.1.4 Device Sync Agent

Server Settings

IP Address: By default, the Device Sync Agent uses all available IP addresses on the Mobility server. Specify a specific IP address to bind the Device Sync Agent to that address.

Port: Displays the port on which the Device Sync Agent communicates with mobile devices.

Secure: By default, the Device Sync Agent uses a secure SSL connection on port 443. Deselect this option to use a non-secure connection on port 80.

Device Settings

Allow Connections: Select this option to allow devices to connect to the Mobility system. You can also select which types of devices can connect: Default Apps, Outlook Client, and Outlook Mobile App.

Quarantine New Devices: By default, when a user configures a new mobile device to synchronize GroupWise data, the device can immediately connect to your Mobility system and start synchronizing data. Select this option to prevent new devices from connecting until you allow access.

Maximum Devices per User: By default, each user can connect to your Mobility system with as many devices as he or she wants. As needed, specify the maximum number of devices that a user can connect. To remove an existing limit, delete the number for an unlimited number of devices.

Remove Unused Devices: By default, mobile devices that have not connected to your Mobility system for 30 days are automatically removed from your Mobility system. As needed, increase or decrease the time limit for unused devices.

Device Security Settings

By establishing a security policy for the passwords that users set on their mobile devices, you help prevent unauthorized access to your Mobility system from lost or misplaced devices.

Device Security Policy: Select this option to enable a device security policy for your Mobility system.

Both Letters and Numbers: By default, any combination of characters is permitted in device passwords. Enable this option to require device passwords that include at least one letter and one number. You can also specify the number of special characters are required in the device password.

Minimum Password Length: By default, the user can set a device password of any length. Enable this option to specify the minimum number of characters required in device passwords. The minimum value is 0; the maximum value is 18. If you specify 0, the security policy does not require the user to set a password on the device.

Inactivity Time: By default, the mobile device does not lock itself in the absence of user activity. Enable this option to specify the number of minutes after which a mobile device locks itself when no user activity occurs.

Reset Device after Failures: By default, an external Reset command must be sent to the mobile device in order to wipe personal data from it. Enable this option to specify the number of failed password attempts after which the mobile device automatically resets itself to factory default settings.

Maximum Limits Settings

By default, users are allowed to synchronize a maximum of 30 days of email and 180 days of calendar items.

Maximum Email Sync Limit: As needed, adjust the maximum number of days for email.

Maximum Calendar Sync Limit: As needed, adjust the maximum number of days for calendar items.

Address Book Setting

The Device Sync Agent accesses the GroupWise Address Book to obtain contact information for synchronization to mobile devices. The Device Sync Agent can obtain the information it needs by logging in as any valid GroupWise user.

Address Book User: Specify the GroupWise user name of the user whose view of the GroupWise Address Book best meets the needs of your mobile device users.

1.1.5 User Source

The initial user source was selected during installation.

Provisioning: Select the source from which users, groups, and resources are added to your Mobility system.

  • LDAP: The users, groups, and resources that are listed in the Mobility Admin console are obtained from the LDAP directory that is defined in the LDAP section that displays when you select LDAP.

  • GroupWise: The users, groups, and resources that are listed in the Mobility Admin console are obtained from the GroupWise system. GroupWise information is obtained through the POA that was specified during installation.

Authentication: Selects the method users must use in order to authenticate their mobile devices to the Mobility system. If you select GroupWise in the Provisioning field, GroupWise is automatically selected in the Authentication field and cannot be changed.

  • LDAP: Users authenticate from their mobile devices to their GroupWise mailboxes by using their LDAP user name and password. This authentication takes place through the LDAP server.

  • GroupWise: Users authenticate from their mobile devices to their GroupWise mailboxes by using the same authentication method that they use themselves to log into their mailboxes. This authentication takes place through the POA and could be either GroupWise authentication or LDAP authentication.

Group Membership Poll Rate: By default, the Mobility Admin console polls the user source for changes in group membership every 1800 seconds (30 minutes). Increase or decrease the poll rate as needed, based on how frequently the memberships in the groups change.

Poll Now: Click Poll Now to immediately check for changes in group memberships and in the GroupWise system address book.

1.1.6 LDAP

When you select LDAP in the Provisioning field, the Mobility Admin console must access an LDAP server in order to locate users and groups of users to add to your Mobility system.

LDAP Server Settings

IP Address: Specify the IP address or DNS hostname of the LDAP server that you want to use for provisioning or authentication.

Port: Specify the port number for communicating with the LDAP server.

The LDAP port number depends on whether the LDAP server requires a secure SSL connection. The default secure port number is 636. The default non-secure LDAP port number is 389.

Secure: Select this option for a secure SSL connection.

Admin Full DN: Specify the fully qualified user name of an administrator user that the Mobility Service can use to access the LDAP server, for example:

cn=admin,ou=users,o=example

Admin Password: Specify the password for the administrator user.

LDAP DN Settings

When you add users and groups to your Mobility system, the Mobility Admin console searches the specified containers and their subcontainers for users and groups to add.

Base User DNs: Specify one or more containers where User objects are located.

Base Group DNs: Specify one or more containers where GroupWise objects are located.

1.1.7 Single Sign-On

If you are using a single sign-on solution such as NetIQ Access Manager or KeySheild SSO, the Mobility Admin console does not require authentication when you are already logged in to the single sign-on solution.

  • For Access Manager, no extra configuration is required.

  • For KeyShield SSO, you must provide Keyshield SSO settings on the Single Sign-On page in the Mobility Admin console. For more information, see KeyShieldSSO.

1.1.8 Users

The Users list displays all users in your Mobility system. Users that have been added as a member of a group are marked with the Group icon Group icon. Mouse over the group icon to display the group that the user is a member of. Mouse over the User icon User icon to display the user source information (the LDAP context for LDAP users or the GroupWise user_name.post_office_domain address for GroupWise users.)

Add Users: Click Add Users to add individual users and resources to your Mobility system.

Search: Type all or part of a user’s first name, last name, or GroupWise user name to filter the list. From the drop-down list, select a device state to filter the list.

User ID: The user’s Mobility user name. Mouse over the user name to display the LDAP context or GroupWise user_name.post_office.domain location. Click the user name to display actions to perform for the user and the user’s devices.

Name: The user’s first and last name as displayed in the GroupWise Address Book.

User State:

The User State column displays the following states that indicate the progress of initial synchronization from GroupWise into the Mobility system:

User State

Explanation

Queued

The initial synchronization process from GroupWise to the Mobility system has not yet started for this user.

Syncing-Init

The initial synchronization process is in progress. As many as four users can be synchronizing at once. As one user is finished, initial synchronization for the next user starts.

Sync-Validate

The Mobility system has received all of the user’s GroupWise data, and is in the process of comparing the data in the Mobility system with the data in GroupWise to verify the completeness of the data transfer.

Synced

The initial synchronization process is complete.

Syncing-Days+

After initial synchronization, users can request more email in addition to the default of the email in the Mailbox folder for the last three days.

Blocked

The specific user is currently blocked from connecting any devices.

Failed

The initial synchronization process has failed. For failed users, the GroupWise Sync Agent automatically retries as many as four times after all other users have been synchronized.

Delete

The user is in the process of being deleted from your Mobility system. If the user has a large amount of data and attachments in the system, the deletion process can take some time.

Re-Init

The user is in the process of being reinitialized. During reinitialization, the user’s GroupWise data is deleted from the Mobility system and is requested again from the GroupWise system. If the user has a large amount of GroupWise data and attachments, the reinitialization process might take a long time.

If the user state is Failed or Blocked, click the user name to perform user actions.

Device State:

If there are multiple lines in the Device State column. the user has multiple devices. Hover over the device state icon to display the device ID.

The Device State column displays the following states that indicate the status of each device’s connection to the Mobility system:

Device State

Explanation

Never Connected Never Connected icon

The user has not yet configured the device to connect to the Mobility system. Device synchronization has not yet begun.

Normal Normal icon

The device has successfully connected to the Mobility system and synchronization to the device is complete.

Blocked Blocked icon

The device is being prevented from connecting to the Mobility system for either of these conditions:

  • All devices have been prevented from connecting by using the Block All Devices setting on the Device Sync Agent Configuration page.

  • An individual device has been manually blocked on the User/Device Actions page because it was having a problem that was adversely affecting the Mobility system.

Quarantined Quarantined icon

A new device is being prevented from connecting until you release it from the device quarantine.

Resetting Reset icon

A Reset command has been sent to a device in order to wipe all personal data from it.

Reset Reset icon

The device has acknowledged the Reset command and has been successfully wiped.

1.1.9 Add User

You can add users individually to your Mobility system.

NOTE:For long-term management, it can be more convenient to create groups of users, and then add the groups to your Mobility system.

Select LDAP or GroupWise as the user source. Your selection should match the Provisioning setting on the User Source page.

Search: Click Search to list all users that are available in the selected user source.

Type all or part or a user’s first name, last name, or user name, then click Search to list one user or a group of related users.

Resources are listed along with users, and can be added to your Mobility system in the same way as users.

Select Users

The information listed for users differs depending on the user source.

Name:

  • LDAP: The user’s user name in the LDAP directory.

  • GroupWise: The user’s first and last name associated with the GroupWise mailbox

ID:

  • LDAP: The user’s fully qualified user name and context in the LDAP directory.

  • GroupWise: The user’s user_name.post_office.domain address in the GroupWise system.

Type: User or resource.

Default Name:

  • LDAP: If the user’s LDAP user name is different from the user’s GroupWise user name, click the default name, then specify the user’s GroupWise user name.

  • GroupWise: If the user’s GroupWise user name is different from the user’s Preferred Email ID that is part of the user’s email address, click the default name, they specify the user’s Preferred Email ID.

Select one or more users, then click Add.

1.1.10 User Status/Actions

Lists the user’s first and last name. Users that have been added as a member of a group are marked with the Group icon Group icon. Mouse over the group icon to display the group that the user is a member of. Mouse over the User icon User icon to display the user source information (the LDAP context for LDAP users or the GroupWise user_name.post_office_domain address for GroupWise users.)

User State

The user state indicates whether the GroupWise Sync Agent has successfully transferred GroupWise data from the user’s mailbox to the Device Sync Agent.

User ID: The user’s GroupWise user name.

State:

The User State column displays the following states that indicate the progress of initial synchronization from GroupWise into the Mobility system:

User State

Explanation

Queued

The initial synchronization process from GroupWise to the Mobility system has not yet started for this user.

Syncing-Init

The initial synchronization process is in progress. As many as four users can be synchronizing at once. As one user is finished, initial synchronization for the next user starts.

Sync-Validate

The Mobility system has received all of the user’s GroupWise data, and is in the process of comparing the data in the Mobility system with the data in GroupWise to verify the completeness of the data transfer.

Synced

The initial synchronization process is complete.

Syncing-Days+

After initial synchronization, users can request more email in addition to the default of the email in the Mailbox folder for the last three days.

Blocked

The specific user is currently blocked from connecting any devices.

Failed

The initial synchronization process has failed. For failed users, the GroupWise Sync Agent automatically retries as many as four times after all other users have been synchronized.

Delete

The user is in the process of being deleted from your Mobility system. If the user has a large amount of data and attachments in the system, the deletion process can take some time.

Re-Init

The user is in the process of being reinitialized. During reinitialization, the user’s GroupWise data is deleted from the Mobility system and is requested again from the GroupWise system. If the user has a large amount of GroupWise data and attachments, the reinitialization process might take a long time.

Settings: To change the user’s synchronization settings, click Device Settings Device Settings or GroupWise Settings GroupWise Settings.

Actions:

User Action

Description

Reinitialize User Reinitialize User icon

For users in the Failed state, reinitialize the user. During reinitialization, the user’s GroupWise data is deleted from the Mobility system and is requested again from the GroupWise system. If the user has a large amount of GroupWise data and attachments, the reinitialization process might take a long time.

Unblock User Unblock User icon

For users in the Blocked state, unblock the user.

  • If you blocked all devices using the Block All Devices setting on the Device Sync Agent Configuration page, deselect the setting to unblock all devices.

  • If you blocked individual devices, unblock them individually on the User/Device Actions page.

1.1.11 Device Status/Actions

Lists all of the user’s devices.

Devices List

The device state indicates whether the Device Sync Agent has successfully transferred data to the user’s mobile device. If the user has more than one device, the device state might not be the same for all devices.

Device ID: The unique identifier for the device.

State:

If there are multiple lines in the Device State column. the user has multiple devices. Hover over the device state icon to display the device ID.

The Device State column displays the following states that indicate the status of each device’s connection to the Mobility system:

Device State

Explanation

Never Connected Never Connected icon

The user has not yet configured the device to connect to the Mobility system. Device synchronization has not yet begun.

Normal Normal icon

The device has successfully connected to the Mobility system and synchronization to the device is complete.

Blocked Blocked icon

The device is being prevented from connecting to the Mobility system for either of these conditions:

  • All devices have been prevented from connecting by using the Block All Devices setting on the Device Sync Agent Configuration page.

  • An individual device has been manually blocked on the User/Device Actions page because it was having a problem that was adversely affecting the Mobility system.

Quarantined Quarantined icon

A new device is being prevented from connecting until you release it from the device quarantine.

Resetting Reset icon

A Reset command has been sent to a device in order to wipe all personal data from it.

Reset Reset icon

The device has acknowledged the Reset command and has been successfully wiped.

Type: The type of device, such as iPhone, Android, or iPad.

OS: The version of the device operating system.

Protocol: The version of ActiveSync that is running on the device.

Last Sync: The date and time when the device last synchronized data with the Mobility system.

Actions:

Device Action

Description

Resync Device Resynchronize Device icon

Resynchronizes the mobile device with the Mobility system. Use this option to resolve the following problems:

  • Synchronization from the Mobility system to a mobile device might occasionally stop, perhaps because abnormal cellular network conditions resulted in dropped synchronization data.

  • Data on a mobile device might not match data as displayed in the GroupWise mailbox.

A user can accomplish the same thing by removing the account from the mobile device and re-adding it, so that the GroupWise data resynchronizes from the Mobility system to the mobile device.

If resynchronizing the device does not resolve discrepancies between data on the device and data in GroupWise, you must reinitialize the user. During reinitialization, the user’s GroupWise data is deleted from the Mobility system and is requested again from the GroupWise system. If the user has a large amount of GroupWise data and attachments, the reinitialization process might take a long time.

Block Device Block Device icon

Prevents the mobile device from connecting to the Mobility system. Use this option when a mobile device is temporarily disrupting your Mobility system by using excessive system resources.

Unblock Device Unblock Device icon

Enables a blocked mobile device to connect again to your Mobility system.

Allow Device Allow Device icon

Allows a quarantined device to connect for the first time to your Mobility system.

Reset Device Reset Device icon

Resets the mobile device to factory default settings. Use this option when a user has lost a mobile device. On some mobile devices, this functionality is known as a “remote wipe” or a “kill pill.” Regardless of the device-specific functionality, this is a very serious step to take with a mobile device.

The Device Sync Agent sends the Reset command to the mobile device, but different devices respond to the Reset command in different ways. Some devices do not respond to a Reset command unless a security policy has been set on the device. The Reset Device button does not display for a device if it will not respond to a Reset command.

Delete Device Delete Device icon

Deletes the mobile device from your Mobility system. Use this option when a user is no longer using a particular mobile device.

Folder List

Click Folder List to display the totals of pending and synchronized items in each folder in the user’s GroupWise mailbox.

1.1.12 Edit User’s Device Settings

As the Mobility administrator, you can configure some device settings for the user. The user can override these settings by logging in to his or her Mobility Settings page of the Mobility Admin console. You can also override the user’s settings.

Mobility Certificate File: If a user’s device does not automatically accept a certificate file in PEM format, you can provide one in DER format for the user to download. Then, on the mobile device, click Download Certificate File icon.

Folder Selection: Select the GroupWise folders to synchronize to the user’s device.

Mobility User Name: The user name associated with the email account on the user’s device. This might or might not be the same as the GroupWise user name.

1.1.13 Edit User’s GroupWise Settings

As the Mobility administrator, you can configure some GroupWise settings for the user. The user can override these settings by logging in to his or her Mobility Settings page of the Mobility Admin console. You can also override the user’s settings.

Address Books to Sync: By default, all GroupWise personal address books are synchronized to the user’s mobile device, except the Frequent Contacts address book. Deselect any personal address books that you do not want to synchronize. Select the Frequent Contacts address book if you want it to synchronize to your mobile device.

Mobility Default Address Book: Select the GroupWise personal address book that you want contacts added to when contacts are added from the mobile device.

Items to Sync: By default, most GroupWise item types are synchronized. Adjust the selections as needed.

GroupWise User Name: Displays the user name associated with the user’s GroupWise account. This might or might not be the same as the user name associated with the email account on the user’s device.

1.1.14 Groups

The Groups list displays all groups in your Mobility system.

Add Groups: Click Add Groups to add a group of users to your Mobility system.

Group membership is not managed in the Mobility Admin console. Manage the membership of LDAP groups in the LDAP directory. Manage the membership of GroupWise distribution lists in ConsoleOne. Changes to membership synchronize regularly into your Mobility system.

Search: Type all or part of a group name to filter the list.

Group ID: The full name of the group. To see the members of the group, view the group in the LDAP directory or in ConsoleOne.

Actions:

Action

Description

Delete Group Delete Group icon

Deletes the group from your Mobility system. Members of the group are also removed from your Mobility system.

1.1.15 Add Groups

When you add a group of users to your Mobility system, you can add and remove members of the group without having to change your Mobility system.

Group membership is not managed in the Mobility Admin console. Manage the membership of LDAP groups in the LDAP directory. Manage the membership of GroupWise distribution lists in ConsoleOne. Changes to membership synchronize regularly into your Mobility system.

Select LDAP or GroupWise as the group source. Your selection should match the Provisioning setting on the User Source page.

Search: Click Search to list all groups that are available in the Mobility Admin console.

Type all or part or a group name, then click Search to list one group or a collection of related groups.

Select Groups

The information listed for groups differs depending on the source.

Name:

  • LDAP: The name of the LDAP group.

  • GroupWise: The name of the GroupWise distribution list.

ID:

  • LDAP: The group’s fully qualified name and context in the LDAP directory.

  • GroupWise: The distribution list’s dislist_name.post_office.domain address in the GroupWise system.

Select one or more groups, then click Add.