Viewing Binding Configuration for a LAN or WAN Interface

You can find out which network protocols are bound to an interface and which are currently operational by using one of the following methods:

• Typing CONFIG at the command line of the NetWare^® server console.
• Loading MONITOR and selecting the following path:

  Select LAN/WAN Information > desired interface's information

  Look at the Protocols window to see the network protocols that are bound to that interface.

  NOTE:  If more than one frame type is used on an interface, MONITOR shows a separate entry for each frame type used on the same interface. You can view each entry for that interface to find all the protocols bound to the interface.

  You can look at the state of ATCP, BRIDGECP, IPCP, and IPXCP. Protocols with the value of 9 (Opened) or 2 (Listening) are bound to this interface. Protocols currently in operation stay in the Opened state. It is possible for multiple protocols to be bound to the same interface and to operate concurrently.

• Loading NIASCFG and following this path:

  Select Configure NIAS > Protocols and Routing > Bindings

  Select the interface you want to view and press Enter.