Previous Page: *Error* Illegal Value for Receiver FIFO Threshold (RXT=).  Next Page: *Error* I/O port address 0x'X' does not appear to be a valid asynchronous hardware device. If you know this address to be correct, you may use the `force' option to override the COMport existence tests.

*Error* Illegal Value for Transmitter FIFO Queue (TXQ=).

Source:  AIOCOMX

Explanation:  The LOAD AIOCOMX command line specified an invalid value for the TXQ= parameter, which sets the transmitter FIFO queue value. For ports that use or emulate a 16550 UART, you can set the TXQ= parameter to 1, 4, 8, 12, or 16.(The default TXQ= value for 16550 devices is 16). For all other types of ports, the TXQ= parameter must be set to the default value, 1.

If AIOCOMX is already loaded, the previously loaded port configurations remain active; the current loadcommand does not create a new port configuration.

Action:  Reenter the LOAD AIOCOMX port with a TXQ= parameter that is supported by your port hardware.

  Previous Page: *Error* Illegal Value for Receiver FIFO Threshold (RXT=).  Next Page: *Error* I/O port address 0x'X' does not appear to be a valid asynchronous hardware device. If you know this address to be correct, you may use the `force' option to override the COMport existence tests.