Source:  AIOPAD Console Messages

Explanation:  AIOPAD was unable to obtain driver information for an X.25 adapter specified with the LOAD AIOPAD command.This indicates that the driver configuration file is corrupted.

Action:  Bring down the remote access software. Log in to the file server as SUPERVISOR and run the NetWare BIND FIX utility. For instructions on running BINDFIX, refer to the utilities reference for your version of NetWare. Then start the routing software again and retry the operation that resulted in the error.

If the error still occurs, run the NetWare INSTALL program, go to the Product Options menu, highlightConnect, and then select Delete to remove the routing software from the server. Then reinstall the product. Retrythe operation that resulted in the error. If the error still occurs, the most likely cause is a problem with thehard disk hardware. If you cannot resolve the problem, contact technical support.