Previous Page: X25TSM 1: Virtual circuit reset on the board board_name LCN lcn.  Next Page: X25TSM 4: No listener for an incoming call received on the Logical Board Name board_name Logical Board Number board _num (Protocol ID=ID). The call will be rejected.

X25TSM 3: Virtual circuit cleared on the board board_name.

Remote DTE Adr: address

Cause: 0xnn

Diagnostic: 0xnn

Source:  X25TSM-1.0

Explanation:  A virtual circuit was cleared with a nonzero cause code on the specified board and LCN. Typically, this message indicates that the call is cleared because a nonrecoverable error is detected.

Action:  The action required to correct the problem depends on the cause code and diagnostic code. Refer to ITU-T Recommendation X.25 1988, section 5.2.4.1.1 and Annex E, for descriptions of various cause codes and diagnostic codes, respectively.

  Previous Page: X25TSM 1: Virtual circuit reset on the board board_name LCN lcn.  Next Page: X25TSM 4: No listener for an incoming call received on the Logical Board Name board_name Logical Board Number board _num (Protocol ID=ID). The call will be rejected.