2.4 C

Name

Description

Purpose

call.nlm

Perl 5.8.0 - Call Extension XS_version: 1.06

callmgr.nlm

Call Connection Manager

  • Console utility used to view the PPP (WAN call status).

  • Dependent on tui.nlm

  • Not loaded by default.

calnlm32.nlm

NetWare NWCalls Runtime Library

  • File system APIs.

  • If unloaded, cross-platform APIs is not available.

  • Dependent on LibC NLM programs.

  • Not loaded by default.

ccscheck.nlm

cdbe.nlm

NetWare Configuration DB Engine

  • NetWare registry NLM program.

  • Cannot be unloaded.

  • Not dependent on other NLM programs, but NetWare can not run without this NLM program.

  • Loaded by default.

cdrom.nlm

NSS (Novell Storage Services™) CD Support (Build 41 MP)

  • Use at the server console to allow a CD-ROM disk to function as a Novell Storage Services (NSS) volume. Your NSS volume mounts immediately.

    This version of cdrom.nlm replaces the version used in previous NetWare releases. (The previous version of cdrom.nlm is now named cdinst.nlm and should be used only for NetWare 5 installation.)

  • The NetWare 6 version of cdrom.nlm is a simple NetWare module that loads the following: nss.nlm, cd9660.nss, and cdhfs.nss.

  • In NetWare 6.5, cddvd.nss replaces the cdrom.nlm.

cernmeta.nlm

Apache 2.0.44 CERN Meta Module

  • Emulate the CERN HTTPD Meta file semantics.

certtool.nlm

jBroker™ ORB Certification Tool

charset.nlm

Display Character Set Support for NetWare

  • Replaces characters with the bitmap definitions of all 256 symbols defined in the preferred code page to be displayed on the server console.

  • If unloaded, the server character set defaults back to symbols defined in the English code.

  • Works with keyb.nlm to support 12 European languages display.

  • Loaded by default only if the user specified a non-English character set supported by Novell during NetWare installation.

  • For more information, see CHARSET in the NW 6.5 SP8: Utilities Reference.

chngserv.nlm

Broker ORB Change Server Utility

 

cifs.nlm

CIFS Semantic Agent (Build 223 MP)

  • Common Internet file system communication layer.

  • If unloaded, non NCP™ clients cannot communicate to server.

  • Dependent on nfap4nrm.nlm, setmd4.nlm, and cifsprox.nlm.

  • Loaded by default.

cifsprox.nlm

NMAS™ Proxy for CIFS (Build 38 MP)

  • Proxy layer for CIFS.

  • Must be unloaded with cifs.nlm.

  • Can not load without cifs.nlm being loaded.

  • Loaded by default.

cios.nlm

Consolidated IO System

  • A new object-oriented I/O subsystem that unifies and greatly simplifies LAN, storage, and USB driver development.

  • Cannot be unloaded. Attempts to unload cios.nlm fail.

  • Dependent on ciosshim.nlm and mm.nlm.

  • Loaded by default cios.nlm is programmatically loaded in stage one of OS initialization. It is not loaded from a script file or by virtue of a dependency but instead is loaded directly by server.exe.

ciosshim.nlm

Novell CIOS Platform Shim

  • Provides APIs to cios.nlm and fatfs.nlm.

  • Dependent on LibC. Fatfs.nlm and cios.nlm are dependent on it.

  • Loaded by default.

cli.nlm

License Install Library

  • Licensing install utility.

  • Not loaded by default.

clib.nlm

Novell Standard C Runtime Library for NLM programs

  • Provides standard C calls for legacy applications.

  • Not possible to unload this NLM because too many applications are dependent on it.

  • Dependent on nit.nlm, nlmlib.nlm, requestr.nlm, threads.nlm, and libc.nlm.

  • Loaded by default.

  • For more information, see CLIB in the NW 6.5 SP8: Utilities Reference.

clibaux.nlm

Novell NLM Auxiliary Shim

  • Provides a short list of interfaces on legacy versions of NetWare, allowing applications to consume modern NDKs and still run on NetWare 4.11 and 3.x. This is a CLib product.

  • Not possible to unload if an application is dependent on it. If no application is dependent on it, then unloading it has no effect. However, it normally would not be loaded in this case; it would have unloaded itself upon start up.

  • Dependent on nit.nlm, nlmlib.nlm, requestr.nlm, threads.nlm, and libc.nlm.

  • Not loaded by default.

clibctx.nlm

CLib Context Agent for NLM Programs

  • First version of libcclib.nlm. This NLM program is not supported and should not be used.

clnnlm32.nlm

NetWare NWCLX Runtime Library

  • Internal support used by all cross-platform NLM programs.

  • If unloaded, cross-platform APIs are not available.

  • Dependent on CLib NLM programs. All cross-platform NLM programs are dependent on it.

  • Not loaded by default.

clstrlib.nlm

Novell Cluster Configuration Library

  • Provides the interface between Novell Cluster Services™ (NCS) and eDirectory. The cluster configuration library (running on the master node) uses eDirectory to access all cluster configuration information, including the cluster attributes, protocols, properties, policies, and settings.

  • If unloaded, clustering does not work.

  • All NCS NLM programs are dependent on it.

  • Only loaded if you installed cluster services on the server.

clxnlm32.nlm

NetWare NWCLX Runtime Library

  • Connection management APIs.

  • If unloaded, cross-platform APIs are not available.

  • Dependent on CLib NLM programs.

  • Not loaded by default.

cma.nlm

Cluster Management Agent (Build 02122003)

  • Acts as a proxy for ConsoleOne. This is an asynchronous, proprietary protocol that runs between the cluster and the client workstation running ConsoleOne.

  • Use ldncs.ncf to load clustering NLM programs. Use uldncs.ncf files to unload clustering NLM programs.

    If you unload cluster NLM programs on a server that was configured to be part of a cluster, the node leaves the cluster. All cluster resources are failed over to other nodes in the cluster, and it is not possible thereafter to activate any sharable drives for clustering pools on that server.

  • Dependent on clstrlib.nlm, gipc.nlm, sbd.nlm, vll.nlm, and vipx.nlm.

  • Only loaded if you installed cluster services on the server.

cmdpar35.nlm

mod_perl-2.0 Extension (CmdParms) XS_version: 0.01

cmm.nlm

Java cmm (Based on 1.4.1_01)

cmon.nlm

Cluster Membership Monitor (Build 02122003)

  • A console utility that runs on each node in the cluster, allowing network administrators to view the status of the cluster’s nodes.

  • Use ldncs.ncf to load clustering NLM programs. Use uldncs.ncf files to unload clustering NLM programs.

    If you unload cluster NLM programs on a server that was configured to be part of a cluster, the node leaves the cluster. All cluster resources are failed over to other nodes in the cluster, and it is not possible thereafter to activate any sharable drives for clustering pools on that server.

  • Dependent on clustering NLM programs.

  • Only loaded if you installed cluster services on the server.

cmpsuper.nlm

Compression Subsystem Supervisor PRODUCTION_31MAY2002

  • If unloaded, the PPP subsystem does not work.

  • Dependent on pred.nlm and nlzs.nlm.

  • Not loaded by default.

comman34.nlm

mod_perl-2.0 Extension (Command) XS_version: 0.01

comp_err.nlm

 

 

conlog.nlm

System Console Logger

conlogj.nlm

Java - GUI Conlog JNI Support Build 030227

conlogo.nlm

Java - GUI Conlog native Support Build 030227

conman.nlm

NetWare TCPIP Configuration and Management Library

  • SNMP interface for command line utilities.

  • If unloaded, netstat.nlm, ifconfig.nlm, arp.nlm, and routecon.nlm fail to load.

  • Dependent on snmp.nlm, netdb.nlm, and csl.nlm.

  • Not loaded by default.

connaud.nlm

NLS - Connection Metering

  • Licensed connection usage metering application

  • Automatically reloaded if unloaded.

  • Dependent on clib.nlm and nlsmeter.nlm.

  • Loaded by default.

connmgr.nlm

NetWare Connection Manager NLM program

  • Allows you to view and clear connections on Windows* NT*. Executes the following command line commands: broadcast, clear station, cm busy, cm conn, cm kill, cm stats, disable login, enable login, idcache conn, idcache stats, and send.

  • Many NLM programs are dependent on it.

  • Loaded by default.

connec33.nlm

mod_perl - 2.0 Extension (Connection) XS_VERSION: 0.01

 

const37.nlm

mod_perl-2.0 Extension (Const) XS_version: 0.01

const39.nlm

mod_perl-2.0 Extension (Const) XS_version: 0.01

const41.nlm

mod_perl-2.0 Extension (Const) XS_version: 0.01

convinet.nlm

MPR 2.x-3.0 Conversion Utility

  • Not loaded by default.

cpdata.nlm

NetWare Install Data Store/Retrieve Module

  • Part of install library.

  • Not loaded by default.

cpdatajv.nlm

Java native Method Library for cpdata.nlm

cpucheck.nlm

NetWare Processor Checking Utility

  • Provides CPU information to other NLM programs as well as the cpucheck console command.

  • If unloaded, other NLM programs won’t be able to use the exported API. Also, the cpucheck console command is disabled.

  • Some third-party NLM programs import its CPU information API. Not dependent on any NLM programs.

  • Loaded by default.

  • For more information, see CPUCHECK in the NW 6.5 SP8: Utilities Reference.

crm.nlm

Novell Cluster Resource Manager (Build 02122003)

  • The Cluster Resource Manager sits above the group membership protocols making sure that, as membership changes occur, cluster resources run on the correct nodes.

  • Use ldncs.ncf to load clustering NLM programs. Use uldncs.ncf files to unload clustering NLM programs.

    If you unload cluster NLM programs on a server that was configured to be part of a cluster, the node leaves the cluster. All cluster resources are failed over to other nodes in the cluster, and it is not possible thereafter to activate any sharable drives for clustering pools on that server.

  • Dependent on clstrlib.nlm, gipc.nlm, sbd.nlm, vll.nlm, and vipx.nlm.

  • Only loaded if you installed cluster services on the server.

csatpxy.nlm

CS Audit Trail Proxy Agent

  • Not loaded by default.

csaudit.nlm

CSLIB: Audit Trail Facility

  • Audit Trail Logging utility.

  • Not loaded by default.

csl.nlm

NetWare Call Support Layer for NetWare

  • Cannot unload.

  • Dependent on cslind.nlm.

  • Loaded by default.

cslcnvrt.nlm

CSL Conversion

  • CSL conversion sublayer.

  • Not loaded by default.

cslind.nlm

TCPIP CSL Independence Module 7Dec99

  • TCP/IP CSL Independence module.

  • If unloaded, TCP/IP does not function.

  • Dependent on tcpip.nlm.

  • Loaded by default.

css.nlm

Cluster System Services (Build 02122003)

  • Provides an API that any distributed cluster-aware application can use to enable distributed-shared memory and distributed locking.

  • Use ldncs.ncf to load clustering NLM programs. Use uldncs.ncf files to unload clustering NLM programs. If you unload cluster NLM programs on a server that was configured to be part of a cluster, the node leaves the cluster. All cluster resources are failed over to other nodes in the cluster, and it is not possible thereafter to activate any sharable drives for clustering pools on that server.

  • Dependent on clstrlib.nlm, gipc.nlm, sbd.nlm, vll.nlm, and vipx.nlm. cvb.nlm is dependent on it.

  • Only loaded if you installed cluster services on the server.

cssysmsg.nlm

CSLIB: System Messages Facility

  • Not loaded by default.

custom.nlm

NIS Example Remote Custom Service Provider

cvb.nlm

Novell Cluster Volume Broker (Build 02122003)

  • Tracks the Novell Storage Services (NSS) configuration for the cluster. If a change is made to NSS for one server, the CVB ensures that the change is replicated across all the nodes in the cluster.

  • Use ldncs.ncf to load clustering NLM programs. Use uldncs.ncf files to unload clustering NLM programs. If you unload cluster NLM programs on a server that was configured to be part of a cluster, the node leaves the cluster. All cluster resources are failed over to other nodes in the cluster, and it is not possible thereafter to activate any sharable drives for clustering pools on that server.

  • Dependent on clstrlib.nlm, gipc.nlm, sbd.nlm, vll.nlm, vipx.nlm, and css.nlm.

  • Only loaded if you installed cluster services on the server.

cwd.nlm

Perl 5.8.0 - Cwd Extension XS_version: 2.06