Use at the server console to view the following:
NetWare® server name, internal network number (server ID), server up time, and loaded LAN drivers
Driver version numbers, hardware settings, node (station) addresses, external network number of the cabling scheme, board name, frame type, and networking protocol for each network board
The server's eDirectory tree and bindery context
CONFIG
Before installing memory boards, network boards, or host bus adapters, execute CONFIG to see a list of hardware settings already in use by LAN drivers.
On some systems, CONFIG may also display information about NetWare Loadable Module™ (NLM™) programs. The kind and amount of NLM information depends on the system.
The following is an example of server information that CONFIG returns:
IPX internal network number: 0F42DB87 Server Up Time: 235 Days 17 Hours 7 Minutes 6 Seconds
Novell NE2000
Version 3.65a December 22, 2002
Hardware setting: I/O ports 300h to 31Fh,
Interrupt 3h
Node address: 00001B2709AF
Frame type: ETHERNET_802.2
Board name: NE2000_1_E82
LAN protocol: IPX network 01010340
Novell NE2000
Version 3.65a December 22, 2002
Hardware setting: I/O ports 300h to 31Fh,
Interrupt 3h
Node address: 00001B2709AF
Frame type: ETHERNET_II
Board name: NE2000_1_EII
LAN protocol: ARP
LAN protocol: IP address 123.45.678.910
mask FF.FF.FF.0 interfaces 1 mask FF.FF.FF.0 interfaces 1
Tree Name: DS_JSBACH
Bindery Context(s): .novell