Novell Documentation: NetWare 6 - DISPLAY PROCESSORS

DISPLAY PROCESSORS

Purpose

Use at the server console to display the status of all processors installed in the server computer and available to the NetWare^® operating system.

Syntax

DISPLAY PROCESSORS [ n ...]

Parameter	Use to
(no parameter)	Display online or offline status of all processors.
n ...	Specify the number of the processor for which you want to display status. By using spaces to separate processor numbers, you can display the status of more than one specific processor.

Parameter

Use to

(no parameter)

Display online or offline status of all processors.

n ...

Specify the number of the processor for which you want to display status.

By using spaces to separate processor numbers, you can display the status of more than one specific processor.

Using DISPLAY PROCESSORS

DISPLAY PROCESSORS lists the online or offline status of all processors. The following example illustrates the command display when all four processors are online:

Processor 0 is ONLINE. 
Processor 1 is ONLINE. 
Processor 2 is ONLINE. 
Processor 3 is ONLINE.

If you have a color monitor for your console, the output appears in green for online processors and in red for offline processor.

Additional Information

Topic	See
Stopping secondary processors	STOP PROCESSORS
Starting secondary processors	START PROCESSORS
Starting processors automatically when Platform Support Module is loaded	SET Multiprocessor Parameters
Adjust load balancing threshold	SET Multiprocessor Parameters
Display per-processor interrupts and interrupt information	DISPLAY INTERRUPTS
Display per-processor information	CPUCHECK
Display per-processor information	MONITOR MONITOR Available Options > Kernel > Processors