Target Server Not Configured for TCP/IP

Problem: During installation, the Internet Agent Installation program determined that the server where you installed the Internet Agent is not configured for TCP/IP. You can fix the problem after the Internet Agent has been installed.
Action: On a NetWare server:
  1. Load INETCFG.

  2. In the Internetworking Configuration box, select Protocols > TCP/IP.

  3. Select Enabled.

  4. Exit INETCFG.

  5. Restart the server.

Refer to the NetWare documentation at the Novell Documentation Web site for more information about configuring TCP/IP on NetWare.

Action: On a Windows server:

NOTE:Steps may vary, depending on your version of Windows.

  1. Right-click My Network Places, click Properties, then double-click Local Area Connection.

  2. Check the list for Internet Protocol (TCP/IP).

  3. If TCP/IP is not in the list, click Add, then follow the instructions for installing TCP/IP.

    or

    If TCP/IP is listed, select it, then check the existing configuration information for accuracy.

  4. Click OK to save any changes you have made.

  5. Restart the server.

Refer to your Windows documentation for more information about installing TCP/IP on Windows.