How to configure the IP address for Portal.

(Last modified: 05Dec2002)

This document (10061072) is provided subject to the disclaimer at the end of this document.

goal

How to configure the IP address for Portal.

fact

Novell Management Portal

Novell NetWare 5.1 SP2

fix

Here's a section from the NW51 SP2 addendum about this issue.

1.9 Connectivity to NetWare Management Portal at
Multiple IP Addresses

By default, connectivity to the NetWare Management Portal is
available only at the first IP address bound to the server's
LAN card as viewed in AUTOEXEC.NCF or INETCFG > View
Configuration > Protocol Bind Commands. For each additional IP
address for which Portal access is desired, the following
server command must be issued. We recommend adding this
command to the AUTOEXEC.NCF file for each IP Address.

HTTPBIND XXX.XXX.XXX.XXX /keyfile:"<SSL Certificate Name>"

Replace XXX.XXX.XXX.XXX with the IP address and replace <SSL
Server Certificate Name> with the name of a certificate
created for the given IP Address.

=======================

disclaimer

The Origin of this information may be internal or external to Novell. Novell makes all reasonable efforts to verify this information. However, the information provided in this document is for your information only. Novell makes no explicit or implied claims to the validity of this information.
Any trademarks referenced in this document are the property of their respective owners. Consult your product manuals for complete trademark information.