Encountered a bad control data during image restoration

The Tuxera imaging driver is present but not being used.

Imglog
setFuncPtrs:ntfsSetFuncPtrs set
[DHBP]retval = 1

Executing a job:  Restoring an image
setFuncPtrs:ntfsSetFuncPtrs set
doRestorePartitionWork:pHdr->type=0x7, isFDEDetected=0
doRestorePartitionWork:isLegacyNTFSDriver global flag set, setting ntfsSetFuncPtrs
initPartition:ntfsInitPartition was called
setFuncPtrs:ntfsSetFuncPtrs set
Resetting kernel partition devices
ioctl(BLKRRPART) /dev/sda returned 0
setFuncPtrs:ntfsSetFuncPtrs set
restoreBaseImage:isLegacyNTFSDriver global flag set, setting ntfsSetFuncPtrs
[iWSD]: Existing ZISD found (/dev/sda) at sector 61
[DHBP]retval = 1
[iWD]: ZISD written to (/dev/sda) at sector 62

DoWork: ISD_USE_IMG_IP_INFO  is not set
DoWork: ISD_USE_IMG_WS_IDENTITY is not set
[iWSD]: Existing ZISD found (/dev/sda) at sector 61
[DHBP]retval = 1
[iWD]: ZISD written to (/dev/sda) at sector 62
Menu.lst, grub.conf and FSTAB is not modified properly
Wed May 22 04:41:34 2013 Closing Log File


Imglogr
Novell ZENworks Imaging Engine v11.2.3
(c) Copyright 1999-2012, Novell, Inc.
All rights reserved.

Image restored:  os/win7-sp1-pro-x86/win7-sp1-pro-x86-postsp.zmg from [ip_address]
Elapsed time:  00:04
Encountered a bad control data during image restoration

This is fixed in version 11.2.4 - see KB 7012027 "ZENworks Configuration Management 11.2.4 - update information and list of fixes" which can be found at:
https://support.microfocus.com/kb/doc.php?id=7012027

If it is not possible to upgrade to ZCM 11.2.4 at this time, this is also fixed in the ZENworks Imaging Update for October 2013, which can be downloaded from https://download.novell.com/Download?buildid=Op8McRXXF3o~

Check the Tuxera driver (tntfs) is loaded:
lsmod | grep tntfs


Re-uploading the Tuxera driver via ZCC could potentially resolve this issue, this has worked in some environments.