Environment
ZENworks Configuration Management 2017 Update 4 Imaging
Situation
Lenovo X1 Carbon laptop booted via PXE does not have network connection.
The command
img -i -h
shows unknown device 0x24fd
Resolution
The device affected is shown by hwinfo as
24: PCI 400.0: 0280 Network controller
[Created at pci.374]
Unique ID: YmUS.KmYAM8YjX26
Parent ID: hoOk.sDmAgUEcbx2
SysFS ID: /devices/pci0000:00/0000:00:1c.2/0000:04:00.0
SysFS BusID: 0000:04:00.0
Hardware Class: network
Model: "Intel Network controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x24fd
SubVendor: pci 0x8086 "Intel Corporation"
SubDevice: pci 0x0130
Revision: 0x88
Memory Range: 0xec100000-0xec101fff (rw,non-prefetchable)
IRQ: 255 (no events)
Module Alias: "pci:v00008086d000024FDsv00008086sd00000130bc02sc80i00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)
24: PCI 400.0: 0280 Network controller
[Created at pci.374]
Unique ID: YmUS.KmYAM8YjX26
Parent ID: hoOk.sDmAgUEcbx2
SysFS ID: /devices/pci0000:00/0000:00:1c.2/0000:04:00.0
SysFS BusID: 0000:04:00.0
Hardware Class: network
Model: "Intel Network controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x24fd
SubVendor: pci 0x8086 "Intel Corporation"
SubDevice: pci 0x0130
Revision: 0x88
Memory Range: 0xec100000-0xec101fff (rw,non-prefetchable)
IRQ: 255 (no events)
Module Alias: "pci:v00008086d000024FDsv00008086sd00000130bc02sc80i00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)
Please load the driver using kernel parameter
newid="0x8086 0x24fd,iwlwifi"
Please see also
https://support.microfocus.com/kb/doc.php?id=3421576
https://support.microfocus.com/kb/doc.php?id=3421576