Running DHost iConsole on NetWare

On NetWare, you can access the DHost iConsole through NetWare Remote Manager. httpstk.nlm must be running on the eDirectory server in order for you to set or change the SAdmin password.

1. Open a Web browser.

2. In the address (URL) field, enter the following:

   http://server's TCP/IP address:port

   For example:

   http://137.65.123.11:8008

   NOTE:  The default alternate port number is 8008. If you have changed this value on the Configuration page in NetWare Remote Manager, make sure you enter the new port number.

   If you have Domain Name Services (DNS) installed on your network for server name-to-IP address resolution, you can also enter the server's DNS name instead of the IP address.

3. Specify a username, context, and password.

Running DHost iConsole on Windows

1. Open a Web browser.

2. In the address (URL) field, enter the following:

   http://server.name:port/dhost

   for example:

   http://MyServer:80/dhost

   You can also use the server IP address to access the DHost iConsole. For example:

   http://137.65.135.150:80/dhost

3. Specify a username, context, and password.

Running DHost iConsole on Linux, Solaris, AIX, and HP-UX

1. Open a Web browser.

2. In the address (URL) field, enter the following:

   http://server.name:port/dhost

   For example:

   http://MyServer:80/dhost

   You can also use the server IP address to access the DHost iConsole. For example:

   http://137.65.135.150:80/dhost

3. Specify a username, context, and password.