19.1 Using Windows ConsoleOne to Access Domains and Post Offices on Linux

In order for you to be able to use ConsoleOne on Windows to administer GroupWise domains, post offices, and agents that are located on Linux, the Linux servers where the domains, post offices, and agents are located must be accessible from Windows.

19.1.1 Making a Linux Server Visible from Windows

To make a Linux server visible from Windows, you need to configure it so that you can map a drive to it as if it were a Windows server.

Table 19-1 Creating a Connection from Windows to Linux

Operating System

Connection Method

Open Enterprise Server (OES) Linux

Use the NetWare Core Protocol™ (NCP™) Server to create an NCP volume on the Linux server that will be visible from Windows just as a NetWare volume would be.

On the Linux server, become root, then enter the following commands:

ncpcon create volume volume_name directory
ncpcon set cross_protocol_locks=1

From a Windows workstation or server where the Novell client is installed, you can now use the Novell Map Network Drive feature to map a drive to the volume on your Linux server, and Windows-type file locking is respected by Linux.

For more information about NCP Server, see the NCP Server Administration Guide for Linux.

SUSE Linux Enterprise Server (SLES)

Use Samba to create a Windows share on the Linux server that will be visible from Windows just as a directory on another Windows server would be. For instructions on setting up a Samba share, see the SUSE Linux Enterprise Server Administration and Installation Guide.

From a Windows workstation or server, you can now use the Windows Map Network Drive feature to map a drive to the directory on your Linux server.

19.1.2 Accessing a Domain or Post Office on Linux from Windows ConsoleOne

After you have made the Linux server visible from Windows:

  1. Map a drive to the domain directory on the Linux server.

  2. In Windows ConsoleOne, click Tools > GroupWise System Operations > Select Domain.

  3. Browse to and select the domain directory, then click OK.

You can now use Windows ConsoleOne to administer all GroupWise objects that belong to the domain that is located on Linux.