The Modules page in DHost iConsole provides information about available eDirectory services and their states. You can also use the Modules page to start and stop (load or unload) these services.
You can only load or unload non-interactive modules such as LDAP, SNMP, and HTTPSTK.
The Modules page has the following attributes:
For more information on using Novell iManager to load and unload eDirectory services, see eDirectory Service Manager.
Open a Web browser.
In the address (URL) field, enter the following:
http://server's TCP/IP address:port
For example:
http://137.65.123.11:8008
NOTE: The default alternate port number is 8008. If you have changed this value on the Configuration page in NetWare Remote Manager, make sure you enter the new port number.
If you have Domain Name Services (DNS) installed on your network for server name-to-IP address resolution, you can also enter the server's DNS name instead of the IP address.
Specify a username, context, and password.
Click List Modules in the Manage Applications list.
To load a module, enter the name and click Load Module.
If you need to verify whether the module actually loaded, check the Display System Console for Module Load checkbox.
Open a Web browser.
In the address (URL) field, enter the following:
http://server.name:port/dhost
for example:
http://MyServer:80/dhost
You can also use the server IP address to access the DHost iConsole. For example:
http://137.65.135.150:80/dhost
Specify a username, context, and password.
Click Modules.
Click to load a module, or to unload a module.
Open a Web browser.
In the address (URL) field, enter the following:
http://server.name:port/dhost
for example:
http://MyServer:80/dhost
You can also use the server IP address to access the DHost iConsole. For example:
http://137.65.135.150:80/dhost
Specify a username, context, and password.
Click Modules.
Click to load a module, or to unload a module.